linux/arch/arm/mach-prima2/pm.c
Russell King b13b9e98b8 ARM: l2c: remove unnecessary call to outer_flush_all()
outer_disable() is defined to safely turn the L2 cache off without data
loss: this means that outer_flush_all() should never be called unless
you need to implement some special L2 cache disabling, and even then
only from your replacement L2 cache disable function.

Acked-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-22 16:38:31 +01:00

155 lines
3.4 KiB
C

/*
* power management entry for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/rtc/sirfsoc_rtciobrg.h>
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
#include "pm.h"
/*
* suspend asm codes will access these to make DRAM become self-refresh and
* system sleep
*/
u32 sirfsoc_pwrc_base;
void __iomem *sirfsoc_memc_base;
static void sirfsoc_set_wakeup_source(void)
{
u32 pwr_trigger_en_reg;
pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
SIRFSOC_PWRC_TRIGGER_EN);
#define X_ON_KEY_B (1 << 0)
#define RTC_ALARM0_B (1 << 2)
#define RTC_ALARM1_B (1 << 3)
sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B |
RTC_ALARM0_B | RTC_ALARM1_B,
sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
}
static void sirfsoc_set_sleep_mode(u32 mode)
{
u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
SIRFSOC_PWRC_PDN_CTRL);
sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1);
sleep_mode |= mode << 1;
sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base +
SIRFSOC_PWRC_PDN_CTRL);
}
static int sirfsoc_pre_suspend_power_off(void)
{
u32 wakeup_entry = virt_to_phys(cpu_resume);
sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base +
SIRFSOC_PWRC_SCRATCH_PAD1);
sirfsoc_set_wakeup_source();
sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE);
return 0;
}
static int sirfsoc_pm_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
sirfsoc_pre_suspend_power_off();
outer_disable();
/* go zzz */
cpu_suspend(0, sirfsoc_finish_suspend);
outer_resume();
break;
default:
return -EINVAL;
}
return 0;
}
static const struct platform_suspend_ops sirfsoc_pm_ops = {
.enter = sirfsoc_pm_enter,
.valid = suspend_valid_only_mem,
};
static const struct of_device_id pwrc_ids[] = {
{ .compatible = "sirf,prima2-pwrc" },
{}
};
static int __init sirfsoc_of_pwrc_init(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, pwrc_ids);
if (!np) {
pr_err("unable to find compatible sirf pwrc node in dtb\n");
return -ENOENT;
}
/*
* pwrc behind rtciobrg is not located in memory space
* though the property is named reg. reg only means base
* offset for pwrc. then of_iomap is not suitable here.
*/
if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base))
panic("unable to find base address of pwrc node in dtb\n");
of_node_put(np);
return 0;
}
static const struct of_device_id memc_ids[] = {
{ .compatible = "sirf,prima2-memc" },
{}
};
static int sirfsoc_memc_probe(struct platform_device *op)
{
struct device_node *np = op->dev.of_node;
sirfsoc_memc_base = of_iomap(np, 0);
if (!sirfsoc_memc_base)
panic("unable to map memc registers\n");
return 0;
}
static struct platform_driver sirfsoc_memc_driver = {
.probe = sirfsoc_memc_probe,
.driver = {
.name = "sirfsoc-memc",
.owner = THIS_MODULE,
.of_match_table = memc_ids,
},
};
static int __init sirfsoc_memc_init(void)
{
return platform_driver_register(&sirfsoc_memc_driver);
}
int __init sirfsoc_pm_init(void)
{
sirfsoc_of_pwrc_init();
sirfsoc_memc_init();
suspend_set_ops(&sirfsoc_pm_ops);
return 0;
}