linux/drivers/gpio/gpio-tz1090.c
Thomas Gleixner bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00

606 lines
16 KiB
C

/*
* Toumaz Xenif TZ1090 GPIO handling.
*
* Copyright (C) 2008-2013 Imagination Technologies Ltd.
*
* Based on ARM PXA code and others.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/export.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <asm/global_lock.h>
/* Register offsets from bank base address */
#define REG_GPIO_DIR 0x00
#define REG_GPIO_IRQ_PLRT 0x20
#define REG_GPIO_IRQ_TYPE 0x30
#define REG_GPIO_IRQ_EN 0x40
#define REG_GPIO_IRQ_STS 0x50
#define REG_GPIO_BIT_EN 0x60
#define REG_GPIO_DIN 0x70
#define REG_GPIO_DOUT 0x80
/* REG_GPIO_IRQ_PLRT */
#define REG_GPIO_IRQ_PLRT_LOW 0
#define REG_GPIO_IRQ_PLRT_HIGH 1
/* REG_GPIO_IRQ_TYPE */
#define REG_GPIO_IRQ_TYPE_LEVEL 0
#define REG_GPIO_IRQ_TYPE_EDGE 1
/**
* struct tz1090_gpio_bank - GPIO bank private data
* @chip: Generic GPIO chip for GPIO bank
* @domain: IRQ domain for GPIO bank (may be NULL)
* @reg: Base of registers, offset for this GPIO bank
* @irq: IRQ number for GPIO bank
* @label: Debug GPIO bank label, used for storage of chip->label
*
* This is the main private data for a GPIO bank. It encapsulates a gpio_chip,
* and the callbacks for the gpio_chip can access the private data with the
* to_bank() macro below.
*/
struct tz1090_gpio_bank {
struct gpio_chip chip;
struct irq_domain *domain;
void __iomem *reg;
int irq;
char label[16];
};
#define to_bank(c) container_of(c, struct tz1090_gpio_bank, chip)
/**
* struct tz1090_gpio - Overall GPIO device private data
* @dev: Device (from platform device)
* @reg: Base of GPIO registers
*
* Represents the overall GPIO device. This structure is actually only
* temporary, and used during init.
*/
struct tz1090_gpio {
struct device *dev;
void __iomem *reg;
};
/**
* struct tz1090_gpio_bank_info - Temporary registration info for GPIO bank
* @priv: Overall GPIO device private data
* @node: Device tree node specific to this GPIO bank
* @index: Index of bank in range 0-2
*/
struct tz1090_gpio_bank_info {
struct tz1090_gpio *priv;
struct device_node *node;
unsigned int index;
};
/* Convenience register accessors */
static inline void tz1090_gpio_write(struct tz1090_gpio_bank *bank,
unsigned int reg_offs, u32 data)
{
iowrite32(data, bank->reg + reg_offs);
}
static inline u32 tz1090_gpio_read(struct tz1090_gpio_bank *bank,
unsigned int reg_offs)
{
return ioread32(bank->reg + reg_offs);
}
/* caller must hold LOCK2 */
static inline void _tz1090_gpio_clear_bit(struct tz1090_gpio_bank *bank,
unsigned int reg_offs,
unsigned int offset)
{
u32 value;
value = tz1090_gpio_read(bank, reg_offs);
value &= ~BIT(offset);
tz1090_gpio_write(bank, reg_offs, value);
}
static void tz1090_gpio_clear_bit(struct tz1090_gpio_bank *bank,
unsigned int reg_offs,
unsigned int offset)
{
int lstat;
__global_lock2(lstat);
_tz1090_gpio_clear_bit(bank, reg_offs, offset);
__global_unlock2(lstat);
}
/* caller must hold LOCK2 */
static inline void _tz1090_gpio_set_bit(struct tz1090_gpio_bank *bank,
unsigned int reg_offs,
unsigned int offset)
{
u32 value;
value = tz1090_gpio_read(bank, reg_offs);
value |= BIT(offset);
tz1090_gpio_write(bank, reg_offs, value);
}
static void tz1090_gpio_set_bit(struct tz1090_gpio_bank *bank,
unsigned int reg_offs,
unsigned int offset)
{
int lstat;
__global_lock2(lstat);
_tz1090_gpio_set_bit(bank, reg_offs, offset);
__global_unlock2(lstat);
}
/* caller must hold LOCK2 */
static inline void _tz1090_gpio_mod_bit(struct tz1090_gpio_bank *bank,
unsigned int reg_offs,
unsigned int offset,
bool val)
{
u32 value;
value = tz1090_gpio_read(bank, reg_offs);
value &= ~BIT(offset);
if (val)
value |= BIT(offset);
tz1090_gpio_write(bank, reg_offs, value);
}
static void tz1090_gpio_mod_bit(struct tz1090_gpio_bank *bank,
unsigned int reg_offs,
unsigned int offset,
bool val)
{
int lstat;
__global_lock2(lstat);
_tz1090_gpio_mod_bit(bank, reg_offs, offset, val);
__global_unlock2(lstat);
}
static inline int tz1090_gpio_read_bit(struct tz1090_gpio_bank *bank,
unsigned int reg_offs,
unsigned int offset)
{
return tz1090_gpio_read(bank, reg_offs) & BIT(offset);
}
/* GPIO chip callbacks */
static int tz1090_gpio_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
struct tz1090_gpio_bank *bank = to_bank(chip);
tz1090_gpio_set_bit(bank, REG_GPIO_DIR, offset);
return 0;
}
static int tz1090_gpio_direction_output(struct gpio_chip *chip,
unsigned int offset, int output_value)
{
struct tz1090_gpio_bank *bank = to_bank(chip);
int lstat;
__global_lock2(lstat);
_tz1090_gpio_mod_bit(bank, REG_GPIO_DOUT, offset, output_value);
_tz1090_gpio_clear_bit(bank, REG_GPIO_DIR, offset);
__global_unlock2(lstat);
return 0;
}
/*
* Return GPIO level
*/
static int tz1090_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct tz1090_gpio_bank *bank = to_bank(chip);
return tz1090_gpio_read_bit(bank, REG_GPIO_DIN, offset);
}
/*
* Set output GPIO level
*/
static void tz1090_gpio_set(struct gpio_chip *chip, unsigned int offset,
int output_value)
{
struct tz1090_gpio_bank *bank = to_bank(chip);
tz1090_gpio_mod_bit(bank, REG_GPIO_DOUT, offset, output_value);
}
static int tz1090_gpio_request(struct gpio_chip *chip, unsigned int offset)
{
struct tz1090_gpio_bank *bank = to_bank(chip);
int ret;
ret = pinctrl_request_gpio(chip->base + offset);
if (ret)
return ret;
tz1090_gpio_set_bit(bank, REG_GPIO_DIR, offset);
tz1090_gpio_set_bit(bank, REG_GPIO_BIT_EN, offset);
return 0;
}
static void tz1090_gpio_free(struct gpio_chip *chip, unsigned int offset)
{
struct tz1090_gpio_bank *bank = to_bank(chip);
pinctrl_free_gpio(chip->base + offset);
tz1090_gpio_clear_bit(bank, REG_GPIO_BIT_EN, offset);
}
static int tz1090_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
{
struct tz1090_gpio_bank *bank = to_bank(chip);
if (!bank->domain)
return -EINVAL;
return irq_create_mapping(bank->domain, offset);
}
/* IRQ chip handlers */
/* Get TZ1090 GPIO chip from irq data provided to generic IRQ callbacks */
static inline struct tz1090_gpio_bank *irqd_to_gpio_bank(struct irq_data *data)
{
return (struct tz1090_gpio_bank *)data->domain->host_data;
}
static void tz1090_gpio_irq_polarity(struct tz1090_gpio_bank *bank,
unsigned int offset, unsigned int polarity)
{
tz1090_gpio_mod_bit(bank, REG_GPIO_IRQ_PLRT, offset, polarity);
}
static void tz1090_gpio_irq_type(struct tz1090_gpio_bank *bank,
unsigned int offset, unsigned int type)
{
tz1090_gpio_mod_bit(bank, REG_GPIO_IRQ_TYPE, offset, type);
}
/* set polarity to trigger on next edge, whether rising or falling */
static void tz1090_gpio_irq_next_edge(struct tz1090_gpio_bank *bank,
unsigned int offset)
{
unsigned int value_p, value_i;
int lstat;
/*
* Set the GPIO's interrupt polarity to the opposite of the current
* input value so that the next edge triggers an interrupt.
*/
__global_lock2(lstat);
value_i = ~tz1090_gpio_read(bank, REG_GPIO_DIN);
value_p = tz1090_gpio_read(bank, REG_GPIO_IRQ_PLRT);
value_p &= ~BIT(offset);
value_p |= value_i & BIT(offset);
tz1090_gpio_write(bank, REG_GPIO_IRQ_PLRT, value_p);
__global_unlock2(lstat);
}
static unsigned int gpio_startup_irq(struct irq_data *data)
{
/*
* This warning indicates that the type of the irq hasn't been set
* before enabling the irq. This would normally be done by passing some
* trigger flags to request_irq().
*/
WARN(irqd_get_trigger_type(data) == IRQ_TYPE_NONE,
"irq type not set before enabling gpio irq %d", data->irq);
irq_gc_ack_clr_bit(data);
irq_gc_mask_set_bit(data);
return 0;
}
static int gpio_set_irq_type(struct irq_data *data, unsigned int flow_type)
{
struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data);
unsigned int type;
unsigned int polarity;
switch (flow_type) {
case IRQ_TYPE_EDGE_BOTH:
type = REG_GPIO_IRQ_TYPE_EDGE;
polarity = REG_GPIO_IRQ_PLRT_LOW;
break;
case IRQ_TYPE_EDGE_RISING:
type = REG_GPIO_IRQ_TYPE_EDGE;
polarity = REG_GPIO_IRQ_PLRT_HIGH;
break;
case IRQ_TYPE_EDGE_FALLING:
type = REG_GPIO_IRQ_TYPE_EDGE;
polarity = REG_GPIO_IRQ_PLRT_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
type = REG_GPIO_IRQ_TYPE_LEVEL;
polarity = REG_GPIO_IRQ_PLRT_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
type = REG_GPIO_IRQ_TYPE_LEVEL;
polarity = REG_GPIO_IRQ_PLRT_LOW;
break;
default:
return -EINVAL;
}
tz1090_gpio_irq_type(bank, data->hwirq, type);
irq_setup_alt_chip(data, flow_type);
if (flow_type == IRQ_TYPE_EDGE_BOTH)
tz1090_gpio_irq_next_edge(bank, data->hwirq);
else
tz1090_gpio_irq_polarity(bank, data->hwirq, polarity);
return 0;
}
#ifdef CONFIG_SUSPEND
static int gpio_set_irq_wake(struct irq_data *data, unsigned int on)
{
struct tz1090_gpio_bank *bank = irqd_to_gpio_bank(data);
#ifdef CONFIG_PM_DEBUG
pr_info("irq_wake irq%d state:%d\n", data->irq, on);
#endif
/* wake on gpio block interrupt */
return irq_set_irq_wake(bank->irq, on);
}
#else
#define gpio_set_irq_wake NULL
#endif
static void tz1090_gpio_irq_handler(struct irq_desc *desc)
{
irq_hw_number_t hw;
unsigned int irq_stat, irq_no;
struct tz1090_gpio_bank *bank;
struct irq_desc *child_desc;
bank = (struct tz1090_gpio_bank *)irq_desc_get_handler_data(desc);
irq_stat = tz1090_gpio_read(bank, REG_GPIO_DIR) &
tz1090_gpio_read(bank, REG_GPIO_IRQ_STS) &
tz1090_gpio_read(bank, REG_GPIO_IRQ_EN) &
0x3FFFFFFF; /* 30 bits only */
for (hw = 0; irq_stat; irq_stat >>= 1, ++hw) {
if (!(irq_stat & 1))
continue;
irq_no = irq_linear_revmap(bank->domain, hw);
child_desc = irq_to_desc(irq_no);
/* Toggle edge for pin with both edges triggering enabled */
if (irqd_get_trigger_type(&child_desc->irq_data)
== IRQ_TYPE_EDGE_BOTH)
tz1090_gpio_irq_next_edge(bank, hw);
generic_handle_irq_desc(child_desc);
}
}
static int tz1090_gpio_bank_probe(struct tz1090_gpio_bank_info *info)
{
struct device_node *np = info->node;
struct device *dev = info->priv->dev;
struct tz1090_gpio_bank *bank;
struct irq_chip_generic *gc;
int err;
bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
if (!bank) {
dev_err(dev, "unable to allocate driver data\n");
return -ENOMEM;
}
/* Offset the main registers to the first register in this bank */
bank->reg = info->priv->reg + info->index * 4;
/* Set up GPIO chip */
snprintf(bank->label, sizeof(bank->label), "tz1090-gpio-%u",
info->index);
bank->chip.label = bank->label;
bank->chip.dev = dev;
bank->chip.direction_input = tz1090_gpio_direction_input;
bank->chip.direction_output = tz1090_gpio_direction_output;
bank->chip.get = tz1090_gpio_get;
bank->chip.set = tz1090_gpio_set;
bank->chip.free = tz1090_gpio_free;
bank->chip.request = tz1090_gpio_request;
bank->chip.to_irq = tz1090_gpio_to_irq;
bank->chip.of_node = np;
/* GPIO numbering from 0 */
bank->chip.base = info->index * 30;
bank->chip.ngpio = 30;
/* Add the GPIO bank */
gpiochip_add(&bank->chip);
/* Get the GPIO bank IRQ if provided */
bank->irq = irq_of_parse_and_map(np, 0);
/* The interrupt is optional (it may be used by another core on chip) */
if (!bank->irq) {
dev_info(dev, "IRQ not provided for bank %u, IRQs disabled\n",
info->index);
return 0;
}
dev_info(dev, "Setting up IRQs for GPIO bank %u\n",
info->index);
/*
* Initialise all interrupts to disabled so we don't get
* spurious ones on a dirty boot and hit the BUG_ON in the
* handler.
*/
tz1090_gpio_write(bank, REG_GPIO_IRQ_EN, 0);
/* Add a virtual IRQ for each GPIO */
bank->domain = irq_domain_add_linear(np,
bank->chip.ngpio,
&irq_generic_chip_ops,
bank);
/* Set up a generic irq chip with 2 chip types (level and edge) */
err = irq_alloc_domain_generic_chips(bank->domain, bank->chip.ngpio, 2,
bank->label, handle_bad_irq, 0, 0,
IRQ_GC_INIT_NESTED_LOCK);
if (err) {
dev_info(dev,
"irq_alloc_domain_generic_chips failed for bank %u, IRQs disabled\n",
info->index);
irq_domain_remove(bank->domain);
return 0;
}
gc = irq_get_domain_generic_chip(bank->domain, 0);
gc->reg_base = bank->reg;
/* level chip type */
gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
gc->chip_types[0].handler = handle_level_irq;
gc->chip_types[0].regs.ack = REG_GPIO_IRQ_STS;
gc->chip_types[0].regs.mask = REG_GPIO_IRQ_EN;
gc->chip_types[0].chip.irq_startup = gpio_startup_irq;
gc->chip_types[0].chip.irq_ack = irq_gc_ack_clr_bit;
gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
gc->chip_types[0].chip.irq_set_type = gpio_set_irq_type;
gc->chip_types[0].chip.irq_set_wake = gpio_set_irq_wake;
gc->chip_types[0].chip.flags = IRQCHIP_MASK_ON_SUSPEND;
/* edge chip type */
gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
gc->chip_types[1].handler = handle_edge_irq;
gc->chip_types[1].regs.ack = REG_GPIO_IRQ_STS;
gc->chip_types[1].regs.mask = REG_GPIO_IRQ_EN;
gc->chip_types[1].chip.irq_startup = gpio_startup_irq;
gc->chip_types[1].chip.irq_ack = irq_gc_ack_clr_bit;
gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit;
gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit;
gc->chip_types[1].chip.irq_set_type = gpio_set_irq_type;
gc->chip_types[1].chip.irq_set_wake = gpio_set_irq_wake;
gc->chip_types[1].chip.flags = IRQCHIP_MASK_ON_SUSPEND;
/* Setup chained handler for this GPIO bank */
irq_set_chained_handler_and_data(bank->irq, tz1090_gpio_irq_handler,
bank);
return 0;
}
static void tz1090_gpio_register_banks(struct tz1090_gpio *priv)
{
struct device_node *np = priv->dev->of_node;
struct device_node *node;
for_each_available_child_of_node(np, node) {
struct tz1090_gpio_bank_info info;
u32 addr;
int ret;
ret = of_property_read_u32(node, "reg", &addr);
if (ret) {
dev_err(priv->dev, "invalid reg on %s\n",
node->full_name);
continue;
}
if (addr >= 3) {
dev_err(priv->dev, "index %u in %s out of range\n",
addr, node->full_name);
continue;
}
info.index = addr;
info.node = of_node_get(node);
info.priv = priv;
ret = tz1090_gpio_bank_probe(&info);
if (ret) {
dev_err(priv->dev, "failure registering %s\n",
node->full_name);
of_node_put(node);
continue;
}
}
}
static int tz1090_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct resource *res_regs;
struct tz1090_gpio priv;
if (!np) {
dev_err(&pdev->dev, "must be instantiated via devicetree\n");
return -ENOENT;
}
res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res_regs) {
dev_err(&pdev->dev, "cannot find registers resource\n");
return -ENOENT;
}
priv.dev = &pdev->dev;
/* Ioremap the registers */
priv.reg = devm_ioremap(&pdev->dev, res_regs->start,
resource_size(res_regs));
if (!priv.reg) {
dev_err(&pdev->dev, "unable to ioremap registers\n");
return -ENOMEM;
}
/* Look for banks */
tz1090_gpio_register_banks(&priv);
return 0;
}
static struct of_device_id tz1090_gpio_of_match[] = {
{ .compatible = "img,tz1090-gpio" },
{ },
};
static struct platform_driver tz1090_gpio_driver = {
.driver = {
.name = "tz1090-gpio",
.of_match_table = tz1090_gpio_of_match,
},
.probe = tz1090_gpio_probe,
};
static int __init tz1090_gpio_init(void)
{
return platform_driver_register(&tz1090_gpio_driver);
}
subsys_initcall(tz1090_gpio_init);