linux/net/tipc/bearer.h
Patrick McHardy a29a194a15 tipc: add InfiniBand media type
Add InfiniBand media type based on the ethernet media type.

The only real difference is that in case of InfiniBand, we need the entire
20 bytes of space reserved for media addresses, so the TIPC media type ID is
not explicitly stored in the packet payload.

Sample output of tipc-config:

# tipc-config -v -addr -netid -nt=all -p -m -b -n -ls

node address: <10.1.4>
current network id: 4711
Type       Lower      Upper      Port Identity              Publication Scope
0          167776257  167776257  <10.1.1:1855512577>        1855512578  cluster
           167776260  167776260  <10.1.4:1216454657>        1216454658  zone
1          1          1          <10.1.4:1216479235>        1216479236  node
Ports:
1216479235: bound to {1,1}
1216454657: bound to {0,167776260}
Media:
eth
ib
Bearers:
ib:ib0
Nodes known:
<10.1.1>: up
Link <broadcast-link>
  Window:20 packets
  RX packets:0 fragments:0/0 bundles:0/0
  TX packets:0 fragments:0/0 bundles:0/0
  RX naks:0 defs:0 dups:0
  TX naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:0 avg:0

Link <10.1.4:ib0-10.1.1:ib0>
  ACTIVE  MTU:2044  Priority:10  Tolerance:1500 ms  Window:50 packets
  RX packets:80 fragments:0/0 bundles:0/0
  TX packets:40 fragments:0/0 bundles:0/0
  TX profile sample:22 packets  average:54 octets
  0-64:100% -256:0% -1024:0% -4096:0% -16384:0% -32768:0% -66000:0%
  RX states:410 probes:213 naks:0 defs:0 dups:0
  TX states:410 probes:197 naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:1 avg:0

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 14:18:33 -04:00

214 lines
7.5 KiB
C

/*
* net/tipc/bearer.h: Include file for TIPC bearer code
*
* Copyright (c) 1996-2006, Ericsson AB
* Copyright (c) 2005, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_BEARER_H
#define _TIPC_BEARER_H
#include "bcast.h"
#define MAX_BEARERS 2
#define MAX_MEDIA 2
/*
* Identifiers associated with TIPC message header media address info
*
* - address info field is 20 bytes long
* - media type identifier located at offset 3
* - remaining bytes vary according to media type
*/
#define TIPC_MEDIA_ADDR_SIZE 20
#define TIPC_MEDIA_TYPE_OFFSET 3
/*
* Identifiers of supported TIPC media types
*/
#define TIPC_MEDIA_TYPE_ETH 1
#define TIPC_MEDIA_TYPE_IB 2
/**
* struct tipc_media_addr - destination address used by TIPC bearers
* @value: address info (format defined by media)
* @media_id: TIPC media type identifier
* @broadcast: non-zero if address is a broadcast address
*/
struct tipc_media_addr {
u8 value[TIPC_MEDIA_ADDR_SIZE];
u8 media_id;
u8 broadcast;
};
struct tipc_bearer;
/**
* struct tipc_media - TIPC media information available to internal users
* @send_msg: routine which handles buffer transmission
* @enable_bearer: routine which enables a bearer
* @disable_bearer: routine which disables a bearer
* @addr2str: routine which converts media address to string
* @addr2msg: routine which converts media address to protocol message area
* @msg2addr: routine which converts media address from protocol message area
* @bcast_addr: media address used in broadcasting
* @priority: default link (and bearer) priority
* @tolerance: default time (in ms) before declaring link failure
* @window: default window (in packets) before declaring link congestion
* @type_id: TIPC media identifier
* @name: media name
*/
struct tipc_media {
int (*send_msg)(struct sk_buff *buf,
struct tipc_bearer *b_ptr,
struct tipc_media_addr *dest);
int (*enable_bearer)(struct tipc_bearer *b_ptr);
void (*disable_bearer)(struct tipc_bearer *b_ptr);
int (*addr2str)(struct tipc_media_addr *a, char *str_buf, int str_size);
int (*addr2msg)(struct tipc_media_addr *a, char *msg_area);
int (*msg2addr)(const struct tipc_bearer *b_ptr,
struct tipc_media_addr *a, char *msg_area);
u32 priority;
u32 tolerance;
u32 window;
u32 type_id;
char name[TIPC_MAX_MEDIA_NAME];
};
/**
* struct tipc_bearer - TIPC bearer structure
* @usr_handle: pointer to additional media-specific information about bearer
* @mtu: max packet size bearer can support
* @blocked: non-zero if bearer is blocked
* @lock: spinlock for controlling access to bearer
* @addr: media-specific address associated with bearer
* @name: bearer name (format = media:interface)
* @media: ptr to media structure associated with bearer
* @priority: default link priority for bearer
* @window: default window size for bearer
* @tolerance: default link tolerance for bearer
* @identity: array index of this bearer within TIPC bearer array
* @link_req: ptr to (optional) structure making periodic link setup requests
* @links: list of non-congested links associated with bearer
* @active: non-zero if bearer structure is represents a bearer
* @net_plane: network plane ('A' through 'H') currently associated with bearer
* @nodes: indicates which nodes in cluster can be reached through bearer
*
* Note: media-specific code is responsible for initialization of the fields
* indicated below when a bearer is enabled; TIPC's generic bearer code takes
* care of initializing all other fields.
*/
struct tipc_bearer {
void *usr_handle; /* initalized by media */
u32 mtu; /* initalized by media */
int blocked; /* initalized by media */
struct tipc_media_addr addr; /* initalized by media */
char name[TIPC_MAX_BEARER_NAME];
spinlock_t lock;
struct tipc_media *media;
struct tipc_media_addr bcast_addr;
u32 priority;
u32 window;
u32 tolerance;
u32 identity;
struct tipc_link_req *link_req;
struct list_head links;
int active;
char net_plane;
struct tipc_node_map nodes;
};
struct tipc_bearer_names {
char media_name[TIPC_MAX_MEDIA_NAME];
char if_name[TIPC_MAX_IF_NAME];
};
struct tipc_link;
extern struct tipc_bearer tipc_bearers[];
/*
* TIPC routines available to supported media types
*/
int tipc_register_media(struct tipc_media *m_ptr);
void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
int tipc_block_bearer(const char *name);
void tipc_continue(struct tipc_bearer *tb_ptr);
int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
int tipc_disable_bearer(const char *name);
/*
* Routines made available to TIPC by supported media types
*/
int tipc_eth_media_start(void);
void tipc_eth_media_stop(void);
#ifdef CONFIG_TIPC_MEDIA_IB
int tipc_ib_media_start(void);
void tipc_ib_media_stop(void);
#else
static inline int tipc_ib_media_start(void) { return 0; }
static inline void tipc_ib_media_stop(void) { return; }
#endif
int tipc_media_set_priority(const char *name, u32 new_value);
int tipc_media_set_window(const char *name, u32 new_value);
void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
struct sk_buff *tipc_media_get_names(void);
struct sk_buff *tipc_bearer_get_names(void);
void tipc_bearer_add_dest(struct tipc_bearer *b_ptr, u32 dest);
void tipc_bearer_remove_dest(struct tipc_bearer *b_ptr, u32 dest);
struct tipc_bearer *tipc_bearer_find(const char *name);
struct tipc_bearer *tipc_bearer_find_interface(const char *if_name);
struct tipc_media *tipc_media_find(const char *name);
int tipc_bearer_blocked(struct tipc_bearer *b_ptr);
void tipc_bearer_stop(void);
/**
* tipc_bearer_send- sends buffer to destination over bearer
*
* IMPORTANT:
* The media send routine must not alter the buffer being passed in
* as it may be needed for later retransmission!
*/
static inline void tipc_bearer_send(struct tipc_bearer *b, struct sk_buff *buf,
struct tipc_media_addr *dest)
{
b->media->send_msg(buf, b, dest);
}
#endif /* _TIPC_BEARER_H */