linux/arch/arm/mach-s3c24xx/mach-h1940.c
Linus Torvalds 9cd11c0c47 ARM: soc: multiplatform enablement
This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
2012-10-01 19:11:38 -07:00

753 lines
19 KiB
C

/* linux/arch/arm/mach-s3c2410/mach-h1940.c
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.handhelds.org/projects/h1940.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/memblock.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/pda_power.h>
#include <linux/s3c_adc_battery.h>
#include <linux/delay.h>
#include <video/platform_lcd.h>
#include <linux/mmc/host.h>
#include <linux/export.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-fns.h>
#include <mach/gpio-nrs.h>
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <sound/uda1380.h>
#include "common.h"
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#define H1940_PA_LATCH S3C2410_CS2
#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END))
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
.virtual = (unsigned long)H1940_LATCH,
.pfn = __phys_to_pfn(H1940_PA_LATCH),
.length = SZ_16K,
.type = MT_DEVICE
},
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x245,
.ulcon = 0x03,
.ufcon = 0x00,
},
/* IR port */
[2] = {
.hwport = 2,
.flags = 0,
.uart_flags = UPF_CONS_FLOW,
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
}
};
/* Board control latch control */
static unsigned int latch_state;
static void h1940_latch_control(unsigned int clear, unsigned int set)
{
unsigned long flags;
local_irq_save(flags);
latch_state &= ~clear;
latch_state |= set;
__raw_writel(latch_state, H1940_LATCH);
local_irq_restore(flags);
}
static inline int h1940_gpiolib_to_latch(int offset)
{
return 1 << (offset + 16);
}
static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
unsigned offset, int value)
{
int latch_bit = h1940_gpiolib_to_latch(offset);
h1940_latch_control(value ? 0 : latch_bit,
value ? latch_bit : 0);
}
static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
unsigned offset, int value)
{
h1940_gpiolib_latch_set(chip, offset, value);
return 0;
}
static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
unsigned offset)
{
return (latch_state >> (offset + 16)) & 1;
}
static struct gpio_chip h1940_latch_gpiochip = {
.base = H1940_LATCH_GPIO(0),
.owner = THIS_MODULE,
.label = "H1940_LATCH",
.ngpio = 16,
.direction_output = h1940_gpiolib_latch_output,
.set = h1940_gpiolib_latch_set,
.get = h1940_gpiolib_latch_get,
};
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
.pullup_pin = H1940_LATCH_USB_DP,
};
static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
.cfg_gpio = s3c24xx_ts_cfg_gpio,
};
/**
* Set lcd on or off
**/
static struct s3c2410fb_display h1940_lcd __initdata = {
.lcdcon5= S3C2410_LCDCON5_FRM565 | \
S3C2410_LCDCON5_INVVLINE | \
S3C2410_LCDCON5_HWSWP,
.type = S3C2410_LCDCON1_TFT,
.width = 240,
.height = 320,
.pixclock = 260000,
.xres = 240,
.yres = 320,
.bpp = 16,
.left_margin = 8,
.right_margin = 20,
.hsync_len = 4,
.upper_margin = 8,
.lower_margin = 7,
.vsync_len = 1,
};
static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
.displays = &h1940_lcd,
.num_displays = 1,
.default_display = 0,
.lpcsel = 0x02,
.gpccon = 0xaa940659,
.gpccon_mask = 0xffffc0f0,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaa84aaa0,
.gpdcon_mask = 0xffffffff,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
};
static int power_supply_init(struct device *dev)
{
return gpio_request(S3C2410_GPF(2), "cable plugged");
}
static int h1940_is_ac_online(void)
{
return !gpio_get_value(S3C2410_GPF(2));
}
static void power_supply_exit(struct device *dev)
{
gpio_free(S3C2410_GPF(2));
}
static char *h1940_supplicants[] = {
"main-battery",
"backup-battery",
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = h1940_is_ac_online,
.exit = power_supply_exit,
.supplied_to = h1940_supplicants,
.num_supplicants = ARRAY_SIZE(h1940_supplicants),
};
static struct resource power_supply_resources[] = {
[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
};
static struct platform_device power_supply = {
.name = "pda-power",
.id = -1,
.dev = {
.platform_data =
&power_supply_info,
},
.resource = power_supply_resources,
.num_resources = ARRAY_SIZE(power_supply_resources),
};
static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
{ .volt = 4070, .cur = 162, .level = 100},
{ .volt = 4040, .cur = 165, .level = 95},
{ .volt = 4016, .cur = 164, .level = 90},
{ .volt = 3996, .cur = 166, .level = 85},
{ .volt = 3971, .cur = 168, .level = 80},
{ .volt = 3951, .cur = 168, .level = 75},
{ .volt = 3931, .cur = 170, .level = 70},
{ .volt = 3903, .cur = 172, .level = 65},
{ .volt = 3886, .cur = 172, .level = 60},
{ .volt = 3858, .cur = 176, .level = 55},
{ .volt = 3842, .cur = 176, .level = 50},
{ .volt = 3818, .cur = 176, .level = 45},
{ .volt = 3789, .cur = 180, .level = 40},
{ .volt = 3769, .cur = 180, .level = 35},
{ .volt = 3749, .cur = 184, .level = 30},
{ .volt = 3732, .cur = 184, .level = 25},
{ .volt = 3716, .cur = 184, .level = 20},
{ .volt = 3708, .cur = 184, .level = 15},
{ .volt = 3716, .cur = 96, .level = 10},
{ .volt = 3700, .cur = 96, .level = 5},
{ .volt = 3684, .cur = 96, .level = 0},
};
static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
{ .volt = 4130, .cur = 0, .level = 100},
{ .volt = 3982, .cur = 0, .level = 50},
{ .volt = 3854, .cur = 0, .level = 10},
{ .volt = 3841, .cur = 0, .level = 0},
};
static int h1940_bat_init(void)
{
int ret;
ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
if (ret)
return ret;
gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
return 0;
}
static void h1940_bat_exit(void)
{
gpio_free(H1940_LATCH_SM803_ENABLE);
}
static void h1940_enable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
}
static void h1940_disable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
}
static struct s3c_adc_bat_pdata h1940_bat_cfg = {
.init = h1940_bat_init,
.exit = h1940_bat_exit,
.enable_charger = h1940_enable_charger,
.disable_charger = h1940_disable_charger,
.gpio_charge_finished = S3C2410_GPF(3),
.gpio_inverted = 1,
.lut_noac = bat_lut_noac,
.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
.lut_acin = bat_lut_acin,
.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
.volt_channel = 0,
.current_channel = 1,
.volt_mult = 4056,
.current_mult = 1893,
.internal_impedance = 200,
.backup_volt_channel = 3,
/* TODO Check backup volt multiplier */
.backup_volt_mult = 4056,
.backup_volt_min = 0,
.backup_volt_max = 4149288
};
static struct platform_device h1940_battery = {
.name = "s3c-adc-battery",
.id = -1,
.dev = {
.parent = &s3c_device_adc.dev,
.platform_data = &h1940_bat_cfg,
},
};
static DEFINE_SPINLOCK(h1940_blink_spin);
int h1940_led_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
{
int blink_gpio, check_gpio1, check_gpio2;
switch (gpio) {
case H1940_LATCH_LED_GREEN:
blink_gpio = S3C2410_GPA(7);
check_gpio1 = S3C2410_GPA(1);
check_gpio2 = S3C2410_GPA(3);
break;
case H1940_LATCH_LED_RED:
blink_gpio = S3C2410_GPA(1);
check_gpio1 = S3C2410_GPA(7);
check_gpio2 = S3C2410_GPA(3);
break;
default:
blink_gpio = S3C2410_GPA(3);
check_gpio1 = S3C2410_GPA(1);
check_gpio2 = S3C2410_GPA(7);
break;
}
if (delay_on && delay_off && !*delay_on && !*delay_off)
*delay_on = *delay_off = 500;
spin_lock(&h1940_blink_spin);
switch (state) {
case GPIO_LED_NO_BLINK_LOW:
case GPIO_LED_NO_BLINK_HIGH:
if (!gpio_get_value(check_gpio1) &&
!gpio_get_value(check_gpio2))
gpio_set_value(H1940_LATCH_LED_FLASH, 0);
gpio_set_value(blink_gpio, 0);
if (gpio_is_valid(gpio))
gpio_set_value(gpio, state);
break;
case GPIO_LED_BLINK:
if (gpio_is_valid(gpio))
gpio_set_value(gpio, 0);
gpio_set_value(H1940_LATCH_LED_FLASH, 1);
gpio_set_value(blink_gpio, 1);
break;
}
spin_unlock(&h1940_blink_spin);
return 0;
}
EXPORT_SYMBOL(h1940_led_blink_set);
static struct gpio_led h1940_leds_desc[] = {
{
.name = "Green",
.default_trigger = "main-battery-full",
.gpio = H1940_LATCH_LED_GREEN,
.retain_state_suspended = 1,
},
{
.name = "Red",
.default_trigger
= "main-battery-charging-blink-full-solid",
.gpio = H1940_LATCH_LED_RED,
.retain_state_suspended = 1,
},
};
static struct gpio_led_platform_data h1940_leds_pdata = {
.num_leds = ARRAY_SIZE(h1940_leds_desc),
.leds = h1940_leds_desc,
.gpio_blink_set = h1940_led_blink_set,
};
static struct platform_device h1940_device_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &h1940_leds_pdata,
},
};
static struct platform_device h1940_device_bluetooth = {
.name = "h1940-bt",
.id = -1,
};
static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
switch (power_mode) {
case MMC_POWER_OFF:
gpio_set_value(H1940_LATCH_SD_POWER, 0);
break;
case MMC_POWER_UP:
case MMC_POWER_ON:
gpio_set_value(H1940_LATCH_SD_POWER, 1);
break;
default:
break;
}
}
static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.gpio_detect = S3C2410_GPF(5),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = h1940_set_mmc_power,
.ocr_avail = MMC_VDD_32_33,
};
static int h1940_backlight_init(struct device *dev)
{
gpio_request(S3C2410_GPB(0), "Backlight");
gpio_direction_output(S3C2410_GPB(0), 0);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
return 0;
}
static int h1940_backlight_notify(struct device *dev, int brightness)
{
if (!brightness) {
gpio_direction_output(S3C2410_GPB(0), 1);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
} else {
gpio_direction_output(S3C2410_GPB(0), 0);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
}
return brightness;
}
static void h1940_backlight_exit(struct device *dev)
{
gpio_direction_output(S3C2410_GPB(0), 1);
gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
}
static struct platform_pwm_backlight_data backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
/* tcnt = 0x31 */
.pwm_period_ns = 36296,
.init = h1940_backlight_init,
.notify = h1940_backlight_notify,
.exit = h1940_backlight_exit,
};
static struct platform_device h1940_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &s3c_device_timer[0].dev,
.platform_data = &backlight_data,
},
.id = -1,
};
static void h1940_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
int value, retries = 100;
if (!power) {
gpio_set_value(S3C2410_GPC(0), 0);
/* wait for 3ac */
do {
value = gpio_get_value(S3C2410_GPC(6));
} while (value && retries--);
gpio_set_value(H1940_LATCH_LCD_P2, 0);
gpio_set_value(H1940_LATCH_LCD_P3, 0);
gpio_set_value(H1940_LATCH_LCD_P4, 0);
gpio_direction_output(S3C2410_GPC(1), 0);
gpio_direction_output(S3C2410_GPC(4), 0);
gpio_set_value(H1940_LATCH_LCD_P1, 0);
gpio_set_value(H1940_LATCH_LCD_P0, 0);
gpio_set_value(S3C2410_GPC(5), 0);
} else {
gpio_set_value(H1940_LATCH_LCD_P0, 1);
gpio_set_value(H1940_LATCH_LCD_P1, 1);
gpio_direction_input(S3C2410_GPC(1));
gpio_direction_input(S3C2410_GPC(4));
mdelay(10);
s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
gpio_set_value(S3C2410_GPC(5), 1);
gpio_set_value(S3C2410_GPC(0), 1);
gpio_set_value(H1940_LATCH_LCD_P3, 1);
gpio_set_value(H1940_LATCH_LCD_P2, 1);
gpio_set_value(H1940_LATCH_LCD_P4, 1);
}
}
static struct plat_lcd_data h1940_lcd_power_data = {
.set_power = h1940_lcd_power_set,
};
static struct platform_device h1940_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent = &s3c_device_lcd.dev,
.dev.platform_data = &h1940_lcd_power_data,
};
static struct uda1380_platform_data uda1380_info = {
.gpio_power = H1940_LATCH_UDA_POWER,
.gpio_reset = S3C2410_GPA(12),
.dac_clk = UDA1380_DAC_CLK_SYSCLK,
};
static struct i2c_board_info h1940_i2c_devices[] = {
{
I2C_BOARD_INFO("uda1380", 0x1a),
.platform_data = &uda1380_info,
},
};
#define DECLARE_BUTTON(p, k, n, w) \
{ \
.gpio = p, \
.code = k, \
.desc = n, \
.wakeup = w, \
.active_low = 1, \
}
static struct gpio_keys_button h1940_buttons[] = {
DECLARE_BUTTON(S3C2410_GPF(0), KEY_POWER, "Power", 1),
DECLARE_BUTTON(S3C2410_GPF(6), KEY_ENTER, "Select", 1),
DECLARE_BUTTON(S3C2410_GPF(7), KEY_RECORD, "Record", 0),
DECLARE_BUTTON(S3C2410_GPG(0), KEY_F11, "Calendar", 0),
DECLARE_BUTTON(S3C2410_GPG(2), KEY_F12, "Contacts", 0),
DECLARE_BUTTON(S3C2410_GPG(3), KEY_MAIL, "Mail", 0),
DECLARE_BUTTON(S3C2410_GPG(6), KEY_LEFT, "Left_arrow", 0),
DECLARE_BUTTON(S3C2410_GPG(7), KEY_HOMEPAGE, "Home", 0),
DECLARE_BUTTON(S3C2410_GPG(8), KEY_RIGHT, "Right_arrow", 0),
DECLARE_BUTTON(S3C2410_GPG(9), KEY_UP, "Up_arrow", 0),
DECLARE_BUTTON(S3C2410_GPG(10), KEY_DOWN, "Down_arrow", 0),
};
static struct gpio_keys_platform_data h1940_buttons_data = {
.buttons = h1940_buttons,
.nbuttons = ARRAY_SIZE(h1940_buttons),
};
static struct platform_device h1940_dev_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &h1940_buttons_data,
}
};
static struct platform_device *h1940_devices[] __initdata = {
&h1940_dev_buttons,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
&samsung_asoc_dma,
&s3c_device_usbgadget,
&h1940_device_leds,
&h1940_device_bluetooth,
&s3c_device_sdi,
&s3c_device_rtc,
&s3c_device_timer[0],
&h1940_backlight,
&h1940_lcd_powerdev,
&s3c_device_adc,
&s3c_device_ts,
&power_supply,
&h1940_battery,
};
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
/* setup PM */
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
s3c_pm_init();
/* Add latch gpio chip, set latch initial value */
h1940_latch_control(0, 0);
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
/* H1940 and RX3715 need to reserve this for suspend */
static void __init h1940_reserve(void)
{
memblock_reserve(0x30003000, 0x1000);
memblock_reserve(0x30081000, 0x1000);
}
static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
}
static void __init h1940_init(void)
{
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT)
| (0x02 << S3C24XX_PLL_PDIV_SHIFT)
| (0x03 << S3C24XX_PLL_SDIV_SHIFT);
writel(tmp, S3C2410_UPLLCON);
gpio_request(S3C2410_GPC(0), "LCD power");
gpio_request(S3C2410_GPC(1), "LCD power");
gpio_request(S3C2410_GPC(4), "LCD power");
gpio_request(S3C2410_GPC(5), "LCD power");
gpio_request(S3C2410_GPC(6), "LCD power");
gpio_request(H1940_LATCH_LCD_P0, "LCD power");
gpio_request(H1940_LATCH_LCD_P1, "LCD power");
gpio_request(H1940_LATCH_LCD_P2, "LCD power");
gpio_request(H1940_LATCH_LCD_P3, "LCD power");
gpio_request(H1940_LATCH_LCD_P4, "LCD power");
gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
gpio_direction_output(S3C2410_GPC(0), 0);
gpio_direction_output(S3C2410_GPC(1), 0);
gpio_direction_output(S3C2410_GPC(4), 0);
gpio_direction_output(S3C2410_GPC(5), 0);
gpio_direction_input(S3C2410_GPC(6));
gpio_direction_output(H1940_LATCH_LCD_P0, 0);
gpio_direction_output(H1940_LATCH_LCD_P1, 0);
gpio_direction_output(H1940_LATCH_LCD_P2, 0);
gpio_direction_output(H1940_LATCH_LCD_P3, 0);
gpio_direction_output(H1940_LATCH_LCD_P4, 0);
gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
gpio_request(H1940_LATCH_SD_POWER, "SD power");
gpio_direction_output(H1940_LATCH_SD_POWER, 0);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
gpio_request(S3C2410_GPA(1), "Red LED blink");
gpio_request(S3C2410_GPA(3), "Blue LED blink");
gpio_request(S3C2410_GPA(7), "Green LED blink");
gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
gpio_direction_output(S3C2410_GPA(1), 0);
gpio_direction_output(S3C2410_GPA(3), 0);
gpio_direction_output(S3C2410_GPA(7), 0);
gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
i2c_register_board_info(0, h1940_i2c_devices,
ARRAY_SIZE(h1940_i2c_devices));
}
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
.timer = &s3c24xx_timer,
.restart = s3c2410_restart,
MACHINE_END