linux/arch/powerpc/platforms/maple/setup.c
Harry Ciao 8f101a051e edac: cpc925 MC platform device setup
Fix up the number of cells for the values of CPC925 Memory Controller,
and setup related platform device during system booting up, against
which CPC925 Memory Controller EDAC driver would be matched.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:57 -07:00

397 lines
9.7 KiB
C

/*
* Maple (970 eval board) setup code
*
* (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
* IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#undef DEBUG
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/major.h>
#include <linux/initrd.h>
#include <linux/vt_kern.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/smp.h>
#include <linux/bitops.h>
#include <linux/of_device.h>
#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/dma.h>
#include <asm/cputable.h>
#include <asm/time.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
#include <asm/udbg.h>
#include <asm/nvram.h>
#include "maple.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
static unsigned long maple_find_nvram_base(void)
{
struct device_node *rtcs;
unsigned long result = 0;
/* find NVRAM device */
rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
if (rtcs) {
struct resource r;
if (of_address_to_resource(rtcs, 0, &r)) {
printk(KERN_EMERG "Maple: Unable to translate NVRAM"
" address\n");
goto bail;
}
if (!(r.flags & IORESOURCE_IO)) {
printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
goto bail;
}
result = r.start;
} else
printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
bail:
of_node_put(rtcs);
return result;
}
static void maple_restart(char *cmd)
{
unsigned int maple_nvram_base;
const unsigned int *maple_nvram_offset, *maple_nvram_command;
struct device_node *sp;
maple_nvram_base = maple_find_nvram_base();
if (maple_nvram_base == 0)
goto fail;
/* find service processor device */
sp = of_find_node_by_name(NULL, "service-processor");
if (!sp) {
printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
goto fail;
}
maple_nvram_offset = of_get_property(sp, "restart-addr", NULL);
maple_nvram_command = of_get_property(sp, "restart-value", NULL);
of_node_put(sp);
/* send command */
outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
for (;;) ;
fail:
printk(KERN_EMERG "Maple: Manual Restart Required\n");
}
static void maple_power_off(void)
{
unsigned int maple_nvram_base;
const unsigned int *maple_nvram_offset, *maple_nvram_command;
struct device_node *sp;
maple_nvram_base = maple_find_nvram_base();
if (maple_nvram_base == 0)
goto fail;
/* find service processor device */
sp = of_find_node_by_name(NULL, "service-processor");
if (!sp) {
printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
goto fail;
}
maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL);
maple_nvram_command = of_get_property(sp, "power-off-value", NULL);
of_node_put(sp);
/* send command */
outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
for (;;) ;
fail:
printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
}
static void maple_halt(void)
{
maple_power_off();
}
#ifdef CONFIG_SMP
struct smp_ops_t maple_smp_ops = {
.probe = smp_mpic_probe,
.message_pass = smp_mpic_message_pass,
.kick_cpu = smp_generic_kick_cpu,
.setup_cpu = smp_mpic_setup_cpu,
.give_timebase = smp_generic_give_timebase,
.take_timebase = smp_generic_take_timebase,
};
#endif /* CONFIG_SMP */
static void __init maple_use_rtas_reboot_and_halt_if_present(void)
{
if (rtas_service_present("system-reboot") &&
rtas_service_present("power-off")) {
ppc_md.restart = rtas_restart;
ppc_md.power_off = rtas_power_off;
ppc_md.halt = rtas_halt;
}
}
void __init maple_setup_arch(void)
{
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000;
/* Setup SMP callback */
#ifdef CONFIG_SMP
smp_ops = &maple_smp_ops;
#endif
/* Lookup PCI hosts */
maple_pci_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
maple_use_rtas_reboot_and_halt_if_present();
printk(KERN_DEBUG "Using native/NAP idle loop\n");
mmio_nvram_init();
}
/*
* Early initialization.
*/
static void __init maple_init_early(void)
{
DBG(" -> maple_init_early\n");
iommu_init_early_dart();
DBG(" <- maple_init_early\n");
}
/*
* This is almost identical to pSeries and CHRP. We need to make that
* code generic at one point, with appropriate bits in the device-tree to
* identify the presence of an HT APIC
*/
static void __init maple_init_IRQ(void)
{
struct device_node *root, *np, *mpic_node = NULL;
const unsigned int *opprop;
unsigned long openpic_addr = 0;
int naddr, n, i, opplen, has_isus = 0;
struct mpic *mpic;
unsigned int flags = MPIC_PRIMARY;
/* Locate MPIC in the device-tree. Note that there is a bug
* in Maple device-tree where the type of the controller is
* open-pic and not interrupt-controller
*/
for_each_node_by_type(np, "interrupt-controller")
if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
if (mpic_node == NULL)
for_each_node_by_type(np, "open-pic") {
mpic_node = np;
break;
}
if (mpic_node == NULL) {
printk(KERN_ERR
"Failed to locate the MPIC interrupt controller\n");
return;
}
/* Find address list in /platform-open-pic */
root = of_find_node_by_path("/");
naddr = of_n_addr_cells(root);
opprop = of_get_property(root, "platform-open-pic", &opplen);
if (opprop != 0) {
openpic_addr = of_read_number(opprop, naddr);
has_isus = (opplen > naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
openpic_addr, has_isus);
}
BUG_ON(openpic_addr == 0);
/* Check for a big endian MPIC */
if (of_get_property(np, "big-endian", NULL) != NULL)
flags |= MPIC_BIG_ENDIAN;
/* XXX Maple specific bits */
flags |= MPIC_U3_HT_IRQS | MPIC_WANTS_RESET;
/* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
flags |= MPIC_BIG_ENDIAN;
/* Setup the openpic driver. More device-tree junks, we hard code no
* ISUs for now. I'll have to revisit some stuffs with the folks doing
* the firmware for those
*/
mpic = mpic_alloc(mpic_node, openpic_addr, flags,
/*has_isus ? 16 :*/ 0, 0, " MPIC ");
BUG_ON(mpic == NULL);
/* Add ISUs */
opplen /= sizeof(u32);
for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
unsigned long isuaddr = of_read_number(opprop + i, naddr);
mpic_assign_isu(mpic, n, isuaddr);
}
/* All ISUs are setup, complete initialization */
mpic_init(mpic);
ppc_md.get_irq = mpic_get_irq;
of_node_put(mpic_node);
of_node_put(root);
}
static void __init maple_progress(char *s, unsigned short hex)
{
printk("*** %04x : %s\n", hex, s ? s : "");
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init maple_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
!of_flat_dt_is_compatible(root, "Momentum,Apache"))
return 0;
/*
* On U3, the DART (iommu) must be allocated now since it
* has an impact on htab_initialize (due to the large page it
* occupies having to be broken up so the DART itself is not
* part of the cacheable linar mapping
*/
alloc_dart_table();
hpte_init_native();
return 1;
}
define_machine(maple) {
.name = "Maple",
.probe = maple_probe,
.setup_arch = maple_setup_arch,
.init_early = maple_init_early,
.init_IRQ = maple_init_IRQ,
.pci_irq_fixup = maple_pci_irq_fixup,
.pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
.restart = maple_restart,
.power_off = maple_power_off,
.halt = maple_halt,
.get_boot_time = maple_get_boot_time,
.set_rtc_time = maple_set_rtc_time,
.get_rtc_time = maple_get_rtc_time,
.calibrate_decr = generic_calibrate_decr,
.progress = maple_progress,
.power_save = power4_idle,
};
#ifdef CONFIG_EDAC
/*
* Register a platform device for CPC925 memory controller on
* Motorola ATCA-6101 blade.
*/
#define MAPLE_CPC925_MODEL "Motorola,ATCA-6101"
static int __init maple_cpc925_edac_setup(void)
{
struct platform_device *pdev;
struct device_node *np = NULL;
struct resource r;
const unsigned char *model;
int ret;
np = of_find_node_by_path("/");
if (!np) {
printk(KERN_ERR "%s: Unable to get root node\n", __func__);
return -ENODEV;
}
model = (const unsigned char *)of_get_property(np, "model", NULL);
if (!model) {
printk(KERN_ERR "%s: Unabel to get model info\n", __func__);
return -ENODEV;
}
ret = strcmp(model, MAPLE_CPC925_MODEL);
of_node_put(np);
if (ret != 0)
return 0;
np = of_find_node_by_type(NULL, "memory-controller");
if (!np) {
printk(KERN_ERR "%s: Unable to find memory-controller node\n",
__func__);
return -ENODEV;
}
ret = of_address_to_resource(np, 0, &r);
of_node_put(np);
if (ret < 0) {
printk(KERN_ERR "%s: Unable to get memory-controller reg\n",
__func__);
return -ENODEV;
}
pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
printk(KERN_INFO "%s: CPC925 platform device created\n", __func__);
return 0;
}
machine_device_initcall(maple, maple_cpc925_edac_setup);
#endif