linux/drivers/phy/socionext/phy-uniphier-usb2.c
Kunihiko Hayashi c339d3e0fb phy: socionext: add USB2 PHY driver for UniPhier SoC
Add a driver for PHY interface built into USB2 controller implemented on
UniPhier SoCs. This driver supports HS-PHY for Pro4 and LD11.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-10 14:27:50 +05:30

245 lines
5.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* phy-uniphier-usb2.c - PHY driver for UniPhier USB2 controller
* Copyright 2015-2018 Socionext Inc.
* Author:
* Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
*/
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#define SG_USBPHY1CTRL 0x500
#define SG_USBPHY1CTRL2 0x504
#define SG_USBPHY2CTRL 0x508
#define SG_USBPHY2CTRL2 0x50c /* LD11 */
#define SG_USBPHY12PLL 0x50c /* Pro4 */
#define SG_USBPHY3CTRL 0x510
#define SG_USBPHY3CTRL2 0x514
#define SG_USBPHY4CTRL 0x518 /* Pro4 */
#define SG_USBPHY4CTRL2 0x51c /* Pro4 */
#define SG_USBPHY34PLL 0x51c /* Pro4 */
struct uniphier_u2phy_param {
u32 offset;
u32 value;
};
struct uniphier_u2phy_soc_data {
struct uniphier_u2phy_param config0;
struct uniphier_u2phy_param config1;
};
struct uniphier_u2phy_priv {
struct regmap *regmap;
struct phy *phy;
struct regulator *vbus;
const struct uniphier_u2phy_soc_data *data;
struct uniphier_u2phy_priv *next;
};
static int uniphier_u2phy_power_on(struct phy *phy)
{
struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
int ret = 0;
if (priv->vbus)
ret = regulator_enable(priv->vbus);
return ret;
}
static int uniphier_u2phy_power_off(struct phy *phy)
{
struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
if (priv->vbus)
regulator_disable(priv->vbus);
return 0;
}
static int uniphier_u2phy_init(struct phy *phy)
{
struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
if (!priv->data)
return 0;
regmap_write(priv->regmap, priv->data->config0.offset,
priv->data->config0.value);
regmap_write(priv->regmap, priv->data->config1.offset,
priv->data->config1.value);
return 0;
}
static struct phy *uniphier_u2phy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct uniphier_u2phy_priv *priv = dev_get_drvdata(dev);
while (priv && args->np != priv->phy->dev.of_node)
priv = priv->next;
if (!priv) {
dev_err(dev, "Failed to find appropriate phy\n");
return ERR_PTR(-EINVAL);
}
return priv->phy;
}
static const struct phy_ops uniphier_u2phy_ops = {
.init = uniphier_u2phy_init,
.power_on = uniphier_u2phy_power_on,
.power_off = uniphier_u2phy_power_off,
.owner = THIS_MODULE,
};
static int uniphier_u2phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *parent, *child;
struct uniphier_u2phy_priv *priv = NULL, *next = NULL;
struct phy_provider *phy_provider;
struct regmap *regmap;
const struct uniphier_u2phy_soc_data *data;
int ret, data_idx, ndatas;
data = of_device_get_match_data(dev);
if (WARN_ON(!data))
return -EINVAL;
/* get number of data */
for (ndatas = 0; data[ndatas].config0.offset; ndatas++)
;
parent = of_get_parent(dev->of_node);
regmap = syscon_node_to_regmap(parent);
of_node_put(parent);
if (IS_ERR(regmap)) {
dev_err(dev, "Failed to get regmap\n");
return PTR_ERR(regmap);
}
for_each_child_of_node(dev->of_node, child) {
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto out_put_child;
}
priv->regmap = regmap;
priv->vbus = devm_regulator_get_optional(dev, "vbus");
if (IS_ERR(priv->vbus)) {
if (PTR_ERR(priv->vbus) == -EPROBE_DEFER) {
ret = PTR_ERR(priv->vbus);
goto out_put_child;
}
priv->vbus = NULL;
}
priv->phy = devm_phy_create(dev, child, &uniphier_u2phy_ops);
if (IS_ERR(priv->phy)) {
dev_err(dev, "Failed to create phy\n");
ret = PTR_ERR(priv->phy);
goto out_put_child;
}
ret = of_property_read_u32(child, "reg", &data_idx);
if (ret) {
dev_err(dev, "Failed to get reg property\n");
goto out_put_child;
}
if (data_idx < ndatas)
priv->data = &data[data_idx];
else
dev_warn(dev, "No phy configuration: %s\n",
child->full_name);
phy_set_drvdata(priv->phy, priv);
priv->next = next;
next = priv;
}
dev_set_drvdata(dev, priv);
phy_provider = devm_of_phy_provider_register(dev,
uniphier_u2phy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
out_put_child:
of_node_put(child);
return ret;
}
static const struct uniphier_u2phy_soc_data uniphier_pro4_data[] = {
{
.config0 = { SG_USBPHY1CTRL, 0x05142400 },
.config1 = { SG_USBPHY12PLL, 0x00010010 },
},
{
.config0 = { SG_USBPHY2CTRL, 0x05142400 },
.config1 = { SG_USBPHY12PLL, 0x00010010 },
},
{
.config0 = { SG_USBPHY3CTRL, 0x05142400 },
.config1 = { SG_USBPHY34PLL, 0x00010010 },
},
{
.config0 = { SG_USBPHY4CTRL, 0x05142400 },
.config1 = { SG_USBPHY34PLL, 0x00010010 },
},
{ /* sentinel */ }
};
static const struct uniphier_u2phy_soc_data uniphier_ld11_data[] = {
{
.config0 = { SG_USBPHY1CTRL, 0x82280000 },
.config1 = { SG_USBPHY1CTRL2, 0x00000106 },
},
{
.config0 = { SG_USBPHY2CTRL, 0x82280000 },
.config1 = { SG_USBPHY2CTRL2, 0x00000106 },
},
{
.config0 = { SG_USBPHY3CTRL, 0x82280000 },
.config1 = { SG_USBPHY3CTRL2, 0x00000106 },
},
{ /* sentinel */ }
};
static const struct of_device_id uniphier_u2phy_match[] = {
{
.compatible = "socionext,uniphier-pro4-usb2-phy",
.data = &uniphier_pro4_data,
},
{
.compatible = "socionext,uniphier-ld11-usb2-phy",
.data = &uniphier_ld11_data,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_u2phy_match);
static struct platform_driver uniphier_u2phy_driver = {
.probe = uniphier_u2phy_probe,
.driver = {
.name = "uniphier-usb2-phy",
.of_match_table = uniphier_u2phy_match,
},
};
module_platform_driver(uniphier_u2phy_driver);
MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
MODULE_DESCRIPTION("UniPhier PHY driver for USB2 controller");
MODULE_LICENSE("GPL v2");