linux/drivers/watchdog/w83627hf_wdt.c
Linus Torvalds 0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00

400 lines
9.1 KiB
C

/*
* w83627hf/thf WDT driver
*
* (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
* added support for W83627THF.
*
* (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com>
*
* Based on advantechwdt.c which is based on wdt.c.
* Original copyright messages:
*
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
*
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/fs.h>
#include <linux/ioport.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
static unsigned long wdt_is_open;
static char expect_close;
static DEFINE_SPINLOCK(io_lock);
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
module_param(wdt_io, int, 0);
MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/*
* Kernel methods.
*/
#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
(same as EFER) */
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
static void w83627hf_select_wd_register(void)
{
unsigned char c;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
outb_p(0x87, WDT_EFER); /* Again according to manual */
outb(0x20, WDT_EFER); /* check chip version */
c = inb(WDT_EFDR);
if (c == 0x82) { /* W83627THF */
outb_p(0x2b, WDT_EFER); /* select GPIO3 */
c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
outb_p(0x2b, WDT_EFER);
outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
} else if (c == 0x88 || c == 0xa0) { /* W83627EHF / W83627DHG */
outb_p(0x2d, WDT_EFER); /* select GPIO5 */
c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
outb_p(0x2d, WDT_EFER);
outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
}
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
outb_p(0x30, WDT_EFER); /* select CR30 */
outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
}
static void w83627hf_unselect_wd_register(void)
{
outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
}
/* tyan motherboards seem to set F5 to 0x4C ?
* So explicitly init to appropriate value. */
static void w83627hf_init(void)
{
unsigned char t;
w83627hf_select_wd_register();
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
t = inb_p(WDT_EFDR); /* read CRF6 */
if (t != 0) {
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
timeout);
outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */
}
outb_p(0xF5, WDT_EFER); /* Select CRF5 */
t = inb_p(WDT_EFDR); /* read CRF5 */
t &= ~0x0C; /* set second mode & disable keyboard
turning off watchdog */
t |= 0x02; /* enable the WDTO# output low pulse
to the KBRST# pin (PIN60) */
outb_p(t, WDT_EFDR); /* Write back to CRF5 */
outb_p(0xF7, WDT_EFER); /* Select CRF7 */
t = inb_p(WDT_EFDR); /* read CRF7 */
t &= ~0xC0; /* disable keyboard & mouse turning off
watchdog */
outb_p(t, WDT_EFDR); /* Write back to CRF7 */
w83627hf_unselect_wd_register();
}
static void wdt_set_time(int timeout)
{
spin_lock(&io_lock);
w83627hf_select_wd_register();
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */
w83627hf_unselect_wd_register();
spin_unlock(&io_lock);
}
static int wdt_ping(void)
{
wdt_set_time(timeout);
return 0;
}
static int wdt_disable(void)
{
wdt_set_time(0);
return 0;
}
static int wdt_set_heartbeat(int t)
{
if (t < 1 || t > 255)
return -EINVAL;
timeout = t;
return 0;
}
static int wdt_get_time(void)
{
int timeleft;
spin_lock(&io_lock);
w83627hf_select_wd_register();
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
timeleft = inb_p(WDT_EFDR); /* Read Timeout counter to CRF6 */
w83627hf_unselect_wd_register();
spin_unlock(&io_lock);
return timeleft;
}
static ssize_t wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
size_t i;
expect_close = 0;
for (i = 0; i != count; i++) {
char c;
if (get_user(c, buf + i))
return -EFAULT;
if (c == 'V')
expect_close = 42;
}
}
wdt_ping();
}
return count;
}
static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int timeval;
static const struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = "W83627HF WDT",
};
switch (cmd) {
case WDIOC_GETSUPPORT:
if (copy_to_user(argp, &ident, sizeof(ident)))
return -EFAULT;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_SETOPTIONS:
{
int options, retval = -EINVAL;
if (get_user(options, p))
return -EFAULT;
if (options & WDIOS_DISABLECARD) {
wdt_disable();
retval = 0;
}
if (options & WDIOS_ENABLECARD) {
wdt_ping();
retval = 0;
}
return retval;
}
case WDIOC_KEEPALIVE:
wdt_ping();
break;
case WDIOC_SETTIMEOUT:
if (get_user(timeval, p))
return -EFAULT;
if (wdt_set_heartbeat(timeval))
return -EINVAL;
wdt_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
return put_user(timeout, p);
case WDIOC_GETTIMELEFT:
timeval = wdt_get_time();
return put_user(timeval, p);
default:
return -ENOTTY;
}
return 0;
}
static int wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &wdt_is_open))
return -EBUSY;
/*
* Activate
*/
wdt_ping();
return nonseekable_open(inode, file);
}
static int wdt_close(struct inode *inode, struct file *file)
{
if (expect_close == 42)
wdt_disable();
else {
pr_crit("Unexpected close, not stopping watchdog!\n");
wdt_ping();
}
expect_close = 0;
clear_bit(0, &wdt_is_open);
return 0;
}
/*
* Notifier for system down
*/
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code == SYS_DOWN || code == SYS_HALT)
wdt_disable(); /* Turn the WDT off */
return NOTIFY_DONE;
}
/*
* Kernel Interfaces
*/
static const struct file_operations wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdt_write,
.unlocked_ioctl = wdt_ioctl,
.open = wdt_open,
.release = wdt_close,
};
static struct miscdevice wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &wdt_fops,
};
/*
* The WDT needs to learn about soft shutdowns in order to
* turn the timebomb registers off.
*/
static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
static int __init wdt_init(void)
{
int ret;
pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n");
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
pr_info("timeout value must be 1 <= timeout <= 255, using %d\n",
WATCHDOG_TIMEOUT);
}
if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
pr_err("I/O address 0x%04x already in use\n", wdt_io);
ret = -EIO;
goto out;
}
w83627hf_init();
ret = register_reboot_notifier(&wdt_notifier);
if (ret != 0) {
pr_err("cannot register reboot notifier (err=%d)\n", ret);
goto unreg_regions;
}
ret = misc_register(&wdt_miscdev);
if (ret != 0) {
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto unreg_reboot;
}
pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
timeout, nowayout);
out:
return ret;
unreg_reboot:
unregister_reboot_notifier(&wdt_notifier);
unreg_regions:
release_region(wdt_io, 1);
goto out;
}
static void __exit wdt_exit(void)
{
misc_deregister(&wdt_miscdev);
unregister_reboot_notifier(&wdt_notifier);
release_region(wdt_io, 1);
}
module_init(wdt_init);
module_exit(wdt_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
MODULE_DESCRIPTION("w83627hf/thf WDT driver");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);