linux/arch/arm/mach-s3c/mach-amlm5900.c
Krzysztof Kozlowski a1342f6a9f ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
PWM timer initialization has two independent implementations - one for
S3C24xx and one for S3C64xx.  The naming however was always the same
and before also the declaration was shared.  This is confusing, error
prone and might cause issues when trying to build multiplatform kernel.

Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200820204203.22328-1-krzk@kernel.org
2020-08-28 16:38:55 +02:00

247 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
//
// Copyright (c) 2006 American Microsystems Limited
// David Anders <danders@amltd.com>
//
// @History:
// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
// Ben Dooks <ben@simtec.co.uk>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/fb-s3c2410.h>
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include <linux/platform_data/i2c-s3c2410.h>
#include "devs.h"
#include "cpu.h"
#include "gpio-cfg.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include "s3c24xx.h"
static struct resource amlm5900_nor_resource =
DEFINE_RES_MEM(0x00000000, SZ_16M);
static struct mtd_partition amlm5900_mtd_partitions[] = {
{
.name = "System",
.size = 0x240000,
.offset = 0,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "Kernel",
.size = 0x100000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "Ramdisk",
.size = 0x300000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "JFFS2",
.size = 0x9A0000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "Settings",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
static struct physmap_flash_data amlm5900_flash_data = {
.width = 2,
.parts = amlm5900_mtd_partitions,
.nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions),
};
static struct platform_device amlm5900_device_nor = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &amlm5900_flash_data,
},
.num_resources = 1,
.resource = &amlm5900_nor_resource,
};
static struct map_desc amlm5900_iodesc[] __initdata = {
};
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
}
};
static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* bus pins */
GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
static struct platform_device *amlm5900_devices[] __initdata = {
#ifdef CONFIG_FB_S3C2410
&s3c_device_lcd,
#endif
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
&amlm5900_device_nor,
};
static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init amlm5900_init_time(void)
{
s3c2410_init_clocks(12000000);
s3c24xx_timer_init();
}
#ifdef CONFIG_FB_S3C2410
static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
.width = 160,
.height = 160,
.type = S3C2410_LCDCON1_STN4,
.pixclock = 680000, /* HCLK = 100MHz */
.xres = 160,
.yres = 160,
.bpp = 4,
.left_margin = 1 << (4 + 3),
.right_margin = 8 << 3,
.hsync_len = 48,
.upper_margin = 0,
.lower_margin = 0,
.lcdcon5 = 0x00000001,
};
static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
.displays = &amlm5900_lcd_info,
.num_displays = 1,
.default_display = 0,
.gpccon = 0xaaaaaaaa,
.gpccon_mask = 0xffffffff,
.gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
.gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaaaaaaaa,
.gpdcon_mask = 0xffffffff,
.gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000ffff,
.gpdup_mask = 0xffffffff,
.gpdup_reg = S3C2410_GPDUP,
};
#endif
static irqreturn_t
amlm5900_wake_interrupt(int irq, void *ignored)
{
return IRQ_HANDLED;
}
static void amlm5900_init_pm(void)
{
int ret = 0;
ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
IRQF_TRIGGER_RISING | IRQF_SHARED,
"amlm5900_wakeup", &amlm5900_wake_interrupt);
if (ret != 0) {
printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
}
}
static void __init amlm5900_init(void)
{
amlm5900_init_pm();
#ifdef CONFIG_FB_S3C2410
s3c24xx_fb_set_platdata(&amlm5900_fb_info);
#endif
s3c_i2c0_set_platdata(NULL);
gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
}
MACHINE_START(AML_M5900, "AML_M5900")
.atag_offset = 0x100,
.map_io = amlm5900_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
.init_time = amlm5900_init_time,
MACHINE_END