linux/arch/arm/mach-imx
Tim Harvey 4bb1d09fe4 ARM: imx: add PCI fixup for PEX860X on Gateworks board
The PEX860X has GPIO's which are used for PCI Reset lines on the
Gateworks Ventana boards.  The GPIO's need to be set as output
level high so as to allow the PCIe devices to come out of reset.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-09 13:18:16 +08:00
..
devices ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
3ds_debugboard.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
3ds_debugboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
anatop.c ARM: imx: use imx_init_revision_from_anatop() on imx6sl 2013-10-21 09:13:13 +08:00
avic.c ARM: arm-soc cleanup for 3.10 2013-05-02 09:03:55 -07:00
board-mx31lilly.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31lite.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-mx31moboard.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
board-pcm038.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
clk-busy.c ARM: arm-soc non-critical fixes for 3.10 2013-05-02 08:56:55 -07:00
clk-fixup-div.c ARM: imx: add common clock support for fixup div 2013-08-16 13:11:24 +08:00
clk-fixup-mux.c ARM: imx: initialize clk_init_data.flags for clk-fixup-mux 2013-09-17 10:04:23 +08:00
clk-gate2.c ARM: mach-imx: clk-gate2: Include "clk.h" 2013-04-01 16:17:50 +08:00
clk-imx1.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
clk-imx6q.c ARM: imx6q: add missing sentinel to divider table 2013-11-11 22:58:44 +08:00
clk-imx6sl.c ARM: imx: enable suspend for imx6sl 2013-10-21 09:39:27 +08:00
clk-imx21.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
clk-imx25.c ARM: i.MX25: clk: parent per5_clk to AHB clock 2013-02-05 10:54:35 +01:00
clk-imx27.c ARM: i.MX: change dev_id to cpu0 while registering cpu clock 2013-09-19 03:53:44 +02:00
clk-imx31.c Linux 3.8-rc6 2013-02-04 22:56:41 -08:00
clk-imx35.c ARM: imx35 Bugfix admux clock 2013-04-09 19:46:30 +08:00
clk-imx51-imx53.c ARM: mach-imx: clk-imx51-imx53: Retrieve base address and irq from dt 2013-10-21 09:27:55 +08:00
clk-pfd.c ARM: imx: add common clock support for pfd 2012-05-02 12:08:20 +02:00
clk-pllv1.c ARM: mach-imx: clk-pllv1: Staticize clk_pllv1_ops 2013-04-01 16:17:49 +08:00
clk-pllv2.c ARM: mach-imx: clk-pllv2: Staticize clk_pllv2_ops 2013-04-01 16:17:50 +08:00
clk-pllv3.c ARM: imx: set up pllv3 POWER and BYPASS sequentially 2013-11-11 22:58:45 +08:00
clk-vf610.c ARM: imx: fix vf610 enet module clock selection 2013-07-15 08:28:09 +08:00
clk.c ARM: imx6: change some clocks to fixup clocks 2013-08-16 13:11:25 +08:00
clk.h The common clk framework changes for 3.12 are dominated by clock driver 2013-09-09 15:49:04 -07:00
common.h ARM: imx: remove imx_src_prepare_restart() call 2013-11-11 22:58:43 +08:00
cpu-imx5.c ARM: mach-imx: cpu-imx5: Include "common.h" 2013-04-01 16:17:49 +08:00
cpu-imx25.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
cpu-imx27.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
cpu-imx31.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
cpu-imx35.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
cpu.c ARM: imx: Include linux/err.h 2013-10-21 09:15:12 +08:00
cpuidle-imx5.c ARM: imx: cpuidle: use init/exit common routine 2013-04-23 13:45:23 +02:00
cpuidle-imx6q.c ARM: imx: cpuidle: use init/exit common routine 2013-04-23 13:45:23 +02:00
cpuidle.h ARM: imx: cpuidle: use init/exit common routine 2013-04-23 13:45:23 +02:00
crm-regs-imx5.h ARM i.MX53: Fix PLL4 base address 2012-06-04 15:23:57 +02:00
crmregs-imx3.h ARM i.MX3: Make ccm base address a variable 2012-04-25 17:03:45 +02:00
devices-imx1.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx21.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx25.h ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
devices-imx27.h ARM : i.MX27 : split code for allocation of ressources of camera and eMMA 2012-11-16 16:21:48 +01:00
devices-imx31.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
devices-imx35.h ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
devices-imx51.h ARM: imx: move platform device code into mach-imx 2012-10-15 09:18:15 +08:00
ehci-imx5.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
ehci-imx25.c Merge branch 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc 2012-11-30 09:27:57 -08:00
ehci-imx27.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
ehci-imx31.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
ehci-imx35.c Merge branch 'next/cam-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc 2012-11-30 09:27:57 -08:00
epit.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
eukrea-baseboards.h ARM: imx: include board headers in the same folder 2012-10-15 09:18:14 +08:00
eukrea_mbimx27-baseboard.c ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro 2013-04-03 16:50:54 +08:00
eukrea_mbimxsd25-baseboard.c ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
eukrea_mbimxsd35-baseboard.c ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
eukrea_mbimxsd51-baseboard.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
gpc.c ARM: imx: ensure dsm_request signal is not asserted when setting LPM 2013-10-21 09:39:26 +08:00
hardware.h ARM: imx: include <asm/io.h> in hardware.h 2013-06-17 15:45:10 +08:00
headsmp.S ARM: imx: replicate the diagnostic register of boot cpu into secondary cores 2013-05-12 21:39:18 +08:00
hotplug.c ARM: imx: do not return from imx_cpu_die() call 2013-10-21 09:37:31 +08:00
iim.h ARM: imx: include iim.h rather than mach/iim.h 2012-10-15 10:03:10 +08:00
imx25-dt.c ARM: imx: create mxc_arch_reset_init_dt() for DT boot 2013-06-17 15:45:10 +08:00
imx27-dt.c ARM: imx: create mxc_arch_reset_init_dt() for DT boot 2013-06-17 15:45:10 +08:00
imx31-dt.c ARM: imx: create mxc_arch_reset_init_dt() for DT boot 2013-06-17 15:45:10 +08:00
imx51-dt.c ARM: imx: remove custom .init_time hook 2013-09-29 21:09:30 +02:00
iomux-imx31.c ARM: mach-imx: iomux-imx31: Staticize mxc_pin_alloc_map 2013-04-01 16:17:48 +08:00
iomux-mx1.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx2x.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx3.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx21.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx25.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx27.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx35.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-mx51.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v1.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
iomux-v1.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
iomux-v3.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
iomux-v3.h ARM: imx: move iomux drivers and headers into mach-imx 2012-10-15 09:18:14 +08:00
irq-common.c ARM: imx: irq-common: Include header to avoid sparse warning 2013-06-17 15:45:14 +08:00
irq-common.h ARM: imx: remove header file mach/irqs.h 2012-10-15 10:05:43 +08:00
Kconfig ARM: SoC platform changes for 3.13 2013-11-11 16:49:45 +09:00
mach-apf9328.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-armadillo5x0.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
mach-bug.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-cpuimx27.c ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro 2013-04-03 16:50:54 +08:00
mach-cpuimx35.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-cpuimx51sd.c ARM: imx: Remove cpufreq driver 2013-04-01 16:17:34 +08:00
mach-eukrea_cpuimx25.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-imx6q.c ARM: imx: add PCI fixup for PEX860X on Gateworks board 2013-12-09 13:18:16 +08:00
mach-imx6sl.c ARM: imx: enable suspend for imx6sl 2013-10-21 09:39:27 +08:00
mach-imx27_visstrim_m10.c gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
mach-imx27ipcam.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-imx27lite.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-imx53.c ARM: imx: remove custom .init_time hook 2013-09-29 21:09:30 +02:00
mach-kzm_arm11_01.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx1ads.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx21ads.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx25_3ds.c ARM: imx: prepare for removal of flexcan_platform_data 2013-06-27 15:15:08 +02:00
mach-mx27_3ds.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx27ads.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx31_3ds.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
mach-mx31ads.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx31lilly.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx31lite.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx31moboard.c leds: leds-mc13783: Prepare driver to support MC13892 LEDs 2013-06-20 16:21:34 -07:00
mach-mx35_3ds.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-mx51_babbage.c ARM: imx: Remove cpufreq driver 2013-04-01 16:17:34 +08:00
mach-mxt_td60.c gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
mach-pca100.c misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
mach-pcm037.c Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2013-11-18 15:50:07 -08:00
mach-pcm037_eet.c ARM: imx: include common.h rather than mach/common.h 2012-10-15 10:03:10 +08:00
mach-pcm038.c misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
mach-pcm043.c misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
mach-qong.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-scb9328.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
mach-vf610.c ARM: imx: remove custom .init_time hook 2013-09-29 21:09:30 +02:00
mach-vpr200.c misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
Makefile ARM: imx: v7_cpu_resume() is needed by imx6sl build 2013-11-11 22:58:43 +08:00
mm-imx1.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx3.c Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm 2013-07-03 09:46:29 -07:00
mm-imx5.c ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt 2013-10-21 09:35:57 +08:00
mm-imx21.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mm-imx25.c ARM: i.MX: remove sdma script address arrays from platform data 2013-08-26 20:47:16 +05:30
mm-imx27.c ARM: imx: move clk_prepare() out from mxc_restart() 2013-06-17 15:45:10 +08:00
mmdc.c ARM: drivers: remove __dev* attributes. 2013-01-03 15:57:04 -08:00
mx1-camera-fiq-ksym.c ARM: imx: move platform_data definitions 2012-09-14 11:17:21 +02:00
mx1-camera-fiq.S ARM: imx: move mx1 support to mach-imx 2010-06-30 08:59:44 +02:00
mx1.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx2x.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx3x.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx21.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx25.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx27.h ARM: i.MX27: Typo fix 2013-07-15 08:28:07 +08:00
mx31.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31lilly-db.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
mx31lite-db.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31moboard-devboard.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31moboard-marxbot.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx31moboard-smartbot.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx35.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx51.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mx53.h ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
mxc.h ARM: imx: enable suspend for imx6sl 2013-10-21 09:39:27 +08:00
pcm037.h ARM: imx: use machine specific hook for late init 2012-05-08 20:36:16 +08:00
pcm970-baseboard.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
platsmp.c arm: delete __cpuinit/__CPUINIT usage from all ARM users 2013-07-14 19:36:52 -04:00
pm-imx3.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
pm-imx5.c ARM: mx53: Allow suspend/resume 2013-08-22 23:20:45 +08:00
pm-imx6q.c ARM: imx: enable suspend for imx6sl 2013-10-21 09:39:27 +08:00
pm-imx27.c ARM: imx: include hardware.h rather than mach/hardware.h 2012-10-15 10:05:43 +08:00
src.c ARM: imx: remove imx_src_prepare_restart() call 2013-11-11 22:58:43 +08:00
ssi-fiq-ksym.c ARM: imx: merge plat-mxc into mach-imx 2012-10-15 10:02:19 +08:00
ssi-fiq.S ARM: imx: merge plat-mxc into mach-imx 2012-10-15 10:02:19 +08:00
system.c ARM: imx: improve mxc_restart() on the SRC bit writes 2013-11-11 22:58:43 +08:00
time.c ARM: imx: remove IRQF_DISABLED 2013-10-21 09:11:05 +08:00
tzic.c ARM: mach-imx: tzic: Staticize *tzic_base 2013-04-01 16:17:51 +08:00
ulpi.h ARM: imx: Remove mxc specific ulpi access ops 2013-06-17 15:45:16 +08:00