linux/arch/mips/powertv/asic/asic-gaia.c
David VomLehn 51f1336d4d MIPS: PowerTV: Add Gaia platform definitions.
Define ASIC address, memory preallocations, and initialization code for the
Gaia platform.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1519/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:31 +01:00

97 lines
4.2 KiB
C

/*
* Locations of devices in the Gaia ASIC
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
const struct register_map gaia_register_map __initdata = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},
/* The registers of IRBlaster */
.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},
.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},
.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},
.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
};