linux/drivers/power/reset/qnap-poweroff.c
Helge Deller 36dbca148b power: reset: Use printk format symbol resolver
Instead of looking up a symbol name by hand, use the %ps printk format
specifier.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-11-30 02:10:18 +01:00

133 lines
3.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
*
* Based on the code from:
*
* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial_reg.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/clk.h>
#define UART1_REG(x) (base + ((UART_##x) << 2))
struct power_off_cfg {
u32 baud;
char cmd;
};
static const struct power_off_cfg qnap_power_off_cfg = {
.baud = 19200,
.cmd = 'A',
};
static const struct power_off_cfg synology_power_off_cfg = {
.baud = 9600,
.cmd = '1',
};
static const struct of_device_id qnap_power_off_of_match_table[] = {
{ .compatible = "qnap,power-off",
.data = &qnap_power_off_cfg,
},
{ .compatible = "synology,power-off",
.data = &synology_power_off_cfg,
},
{}
};
MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
static void __iomem *base;
static unsigned long tclk;
static const struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
/* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
writel(0x03, UART1_REG(LCR));
writel(0x00, UART1_REG(IER));
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
/* send the power-off command to PIC */
writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
const struct of_device_id *match =
of_match_node(qnap_power_off_of_match_table, np);
cfg = match->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
return -EINVAL;
}
base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!base) {
dev_err(&pdev->dev, "Unable to map resource");
return -EINVAL;
}
/* We need to know tclk in order to calculate the UART divisor */
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "Clk missing");
return PTR_ERR(clk);
}
tclk = clk_get_rate(clk);
/* Check that nothing else has already setup a handler */
if (pm_power_off) {
dev_err(&pdev->dev, "pm_power_off already claimed for %ps",
pm_power_off);
return -EBUSY;
}
pm_power_off = qnap_power_off;
return 0;
}
static int qnap_power_off_remove(struct platform_device *pdev)
{
pm_power_off = NULL;
return 0;
}
static struct platform_driver qnap_power_off_driver = {
.probe = qnap_power_off_probe,
.remove = qnap_power_off_remove,
.driver = {
.name = "qnap_power_off",
.of_match_table = of_match_ptr(qnap_power_off_of_match_table),
},
};
module_platform_driver(qnap_power_off_driver);
MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
MODULE_DESCRIPTION("QNAP Power off driver");
MODULE_LICENSE("GPL v2");