linux/net/ax25/ax25_subr.c
Duoming Zhou 7d8a3a477b ax25: Fix ax25 session cleanup problems
There are session cleanup problems in ax25_release() and
ax25_disconnect(). If we setup a session and then disconnect,
the disconnected session is still in "LISTENING" state that
is shown below.

Active AX.25 sockets
Dest       Source     Device  State        Vr/Vs    Send-Q  Recv-Q
DL9SAU-4   DL9SAU-3   ???     LISTENING    000/000  0       0
DL9SAU-3   DL9SAU-4   ???     LISTENING    000/000  0       0

The first reason is caused by del_timer_sync() in ax25_release().
The timers of ax25 are used for correct session cleanup. If we use
ax25_release() to close ax25 sessions and ax25_dev is not null,
the del_timer_sync() functions in ax25_release() will execute.
As a result, the sessions could not be cleaned up correctly,
because the timers have stopped.

In order to solve this problem, this patch adds a device_up flag
in ax25_dev in order to judge whether the device is up. If there
are sessions to be cleaned up, the del_timer_sync() in
ax25_release() will not execute. What's more, we add ax25_cb_del()
in ax25_kill_by_device(), because the timers have been stopped
and there are no functions that could delete ax25_cb if we do not
call ax25_release(). Finally, we reorder the position of
ax25_list_lock in ax25_cb_del() in order to synchronize among
different functions that call ax25_cb_del().

The second reason is caused by improper check in ax25_disconnect().
The incoming ax25 sessions which ax25->sk is null will close
heartbeat timer, because the check "if(!ax25->sk || ..)" is
satisfied. As a result, the session could not be cleaned up properly.

In order to solve this problem, this patch changes the improper
check to "if(ax25->sk && ..)" in ax25_disconnect().

What`s more, the ax25_disconnect() may be called twice, which is
not necessary. For example, ax25_kill_by_device() calls
ax25_disconnect() and sets ax25->state to AX25_STATE_0, but
ax25_release() calls ax25_disconnect() again.

In order to solve this problem, this patch add a check in
ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD,
the ax25_disconnect() in ax25_release() should not be executed.

Fixes: 82e31755e5 ("ax25: Fix UAF bugs in ax25 timers")
Fixes: 8a367e74c0 ("ax25: Fix segfault after sock connection timeout")
Reported-and-tested-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220530152158.108619-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-02 10:37:57 +02:00

297 lines
7 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
*
* Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
* Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
* Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
* Copyright (C) Frederic Rible F1OAT (frible@teaser.fr)
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <linux/uaccess.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
/*
* This routine purges all the queues of frames.
*/
void ax25_clear_queues(ax25_cb *ax25)
{
skb_queue_purge(&ax25->write_queue);
skb_queue_purge(&ax25->ack_queue);
skb_queue_purge(&ax25->reseq_queue);
skb_queue_purge(&ax25->frag_queue);
}
/*
* This routine purges the input queue of those frames that have been
* acknowledged. This replaces the boxes labelled "V(a) <- N(r)" on the
* SDL diagram.
*/
void ax25_frames_acked(ax25_cb *ax25, unsigned short nr)
{
struct sk_buff *skb;
/*
* Remove all the ack-ed frames from the ack queue.
*/
if (ax25->va != nr) {
while (skb_peek(&ax25->ack_queue) != NULL && ax25->va != nr) {
skb = skb_dequeue(&ax25->ack_queue);
kfree_skb(skb);
ax25->va = (ax25->va + 1) % ax25->modulus;
}
}
}
void ax25_requeue_frames(ax25_cb *ax25)
{
struct sk_buff *skb;
/*
* Requeue all the un-ack-ed frames on the output queue to be picked
* up by ax25_kick called from the timer. This arrangement handles the
* possibility of an empty output queue.
*/
while ((skb = skb_dequeue_tail(&ax25->ack_queue)) != NULL)
skb_queue_head(&ax25->write_queue, skb);
}
/*
* Validate that the value of nr is between va and vs. Return true or
* false for testing.
*/
int ax25_validate_nr(ax25_cb *ax25, unsigned short nr)
{
unsigned short vc = ax25->va;
while (vc != ax25->vs) {
if (nr == vc) return 1;
vc = (vc + 1) % ax25->modulus;
}
if (nr == ax25->vs) return 1;
return 0;
}
/*
* This routine is the centralised routine for parsing the control
* information for the different frame formats.
*/
int ax25_decode(ax25_cb *ax25, struct sk_buff *skb, int *ns, int *nr, int *pf)
{
unsigned char *frame;
int frametype = AX25_ILLEGAL;
frame = skb->data;
*ns = *nr = *pf = 0;
if (ax25->modulus == AX25_MODULUS) {
if ((frame[0] & AX25_S) == 0) {
frametype = AX25_I; /* I frame - carries NR/NS/PF */
*ns = (frame[0] >> 1) & 0x07;
*nr = (frame[0] >> 5) & 0x07;
*pf = frame[0] & AX25_PF;
} else if ((frame[0] & AX25_U) == 1) { /* S frame - take out PF/NR */
frametype = frame[0] & 0x0F;
*nr = (frame[0] >> 5) & 0x07;
*pf = frame[0] & AX25_PF;
} else if ((frame[0] & AX25_U) == 3) { /* U frame - take out PF */
frametype = frame[0] & ~AX25_PF;
*pf = frame[0] & AX25_PF;
}
skb_pull(skb, 1);
} else {
if ((frame[0] & AX25_S) == 0) {
frametype = AX25_I; /* I frame - carries NR/NS/PF */
*ns = (frame[0] >> 1) & 0x7F;
*nr = (frame[1] >> 1) & 0x7F;
*pf = frame[1] & AX25_EPF;
skb_pull(skb, 2);
} else if ((frame[0] & AX25_U) == 1) { /* S frame - take out PF/NR */
frametype = frame[0] & 0x0F;
*nr = (frame[1] >> 1) & 0x7F;
*pf = frame[1] & AX25_EPF;
skb_pull(skb, 2);
} else if ((frame[0] & AX25_U) == 3) { /* U frame - take out PF */
frametype = frame[0] & ~AX25_PF;
*pf = frame[0] & AX25_PF;
skb_pull(skb, 1);
}
}
return frametype;
}
/*
* This routine is called when the HDLC layer internally generates a
* command or response for the remote machine ( eg. RR, UA etc. ).
* Only supervisory or unnumbered frames are processed.
*/
void ax25_send_control(ax25_cb *ax25, int frametype, int poll_bit, int type)
{
struct sk_buff *skb;
unsigned char *dptr;
if ((skb = alloc_skb(ax25->ax25_dev->dev->hard_header_len + 2, GFP_ATOMIC)) == NULL)
return;
skb_reserve(skb, ax25->ax25_dev->dev->hard_header_len);
skb_reset_network_header(skb);
/* Assume a response - address structure for DTE */
if (ax25->modulus == AX25_MODULUS) {
dptr = skb_put(skb, 1);
*dptr = frametype;
*dptr |= (poll_bit) ? AX25_PF : 0;
if ((frametype & AX25_U) == AX25_S) /* S frames carry NR */
*dptr |= (ax25->vr << 5);
} else {
if ((frametype & AX25_U) == AX25_U) {
dptr = skb_put(skb, 1);
*dptr = frametype;
*dptr |= (poll_bit) ? AX25_PF : 0;
} else {
dptr = skb_put(skb, 2);
dptr[0] = frametype;
dptr[1] = (ax25->vr << 1);
dptr[1] |= (poll_bit) ? AX25_EPF : 0;
}
}
ax25_transmit_buffer(ax25, skb, type);
}
/*
* Send a 'DM' to an unknown connection attempt, or an invalid caller.
*
* Note: src here is the sender, thus it's the target of the DM
*/
void ax25_return_dm(struct net_device *dev, ax25_address *src, ax25_address *dest, ax25_digi *digi)
{
struct sk_buff *skb;
char *dptr;
ax25_digi retdigi;
if (dev == NULL)
return;
if ((skb = alloc_skb(dev->hard_header_len + 1, GFP_ATOMIC)) == NULL)
return; /* Next SABM will get DM'd */
skb_reserve(skb, dev->hard_header_len);
skb_reset_network_header(skb);
ax25_digi_invert(digi, &retdigi);
dptr = skb_put(skb, 1);
*dptr = AX25_DM | AX25_PF;
/*
* Do the address ourselves
*/
dptr = skb_push(skb, ax25_addr_size(digi));
dptr += ax25_addr_build(dptr, dest, src, &retdigi, AX25_RESPONSE, AX25_MODULUS);
ax25_queue_xmit(skb, dev);
}
/*
* Exponential backoff for AX.25
*/
void ax25_calculate_t1(ax25_cb *ax25)
{
int n, t = 2;
switch (ax25->backoff) {
case 0:
break;
case 1:
t += 2 * ax25->n2count;
break;
case 2:
for (n = 0; n < ax25->n2count; n++)
t *= 2;
if (t > 8) t = 8;
break;
}
ax25->t1 = t * ax25->rtt;
}
/*
* Calculate the Round Trip Time
*/
void ax25_calculate_rtt(ax25_cb *ax25)
{
if (ax25->backoff == 0)
return;
if (ax25_t1timer_running(ax25) && ax25->n2count == 0)
ax25->rtt = (9 * ax25->rtt + ax25->t1 - ax25_display_timer(&ax25->t1timer)) / 10;
if (ax25->rtt < AX25_T1CLAMPLO)
ax25->rtt = AX25_T1CLAMPLO;
if (ax25->rtt > AX25_T1CLAMPHI)
ax25->rtt = AX25_T1CLAMPHI;
}
void ax25_disconnect(ax25_cb *ax25, int reason)
{
ax25_clear_queues(ax25);
if (reason == ENETUNREACH) {
del_timer_sync(&ax25->timer);
del_timer_sync(&ax25->t1timer);
del_timer_sync(&ax25->t2timer);
del_timer_sync(&ax25->t3timer);
del_timer_sync(&ax25->idletimer);
} else {
if (ax25->sk && !sock_flag(ax25->sk, SOCK_DESTROY))
ax25_stop_heartbeat(ax25);
ax25_stop_t1timer(ax25);
ax25_stop_t2timer(ax25);
ax25_stop_t3timer(ax25);
ax25_stop_idletimer(ax25);
}
ax25->state = AX25_STATE_0;
ax25_link_failed(ax25, reason);
if (ax25->sk != NULL) {
local_bh_disable();
bh_lock_sock(ax25->sk);
ax25->sk->sk_state = TCP_CLOSE;
ax25->sk->sk_err = reason;
ax25->sk->sk_shutdown |= SEND_SHUTDOWN;
if (!sock_flag(ax25->sk, SOCK_DEAD)) {
ax25->sk->sk_state_change(ax25->sk);
sock_set_flag(ax25->sk, SOCK_DEAD);
}
bh_unlock_sock(ax25->sk);
local_bh_enable();
}
}