linux/include/acpi/actbl1.h
Bob Moore 4a90c7e862 [ACPI] ACPICA 20060113
Added 2006 copyright.

At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n

Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-20 02:23:50 -05:00

136 lines
5.9 KiB
C

/******************************************************************************
*
* Name: actbl1.h - ACPI 1.0 tables
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACTBL1_H__
#define __ACTBL1_H__
#pragma pack(1)
/*
* ACPI 1.0 Root System Description Table (RSDT)
*/
struct rsdt_descriptor_rev1 {
ACPI_TABLE_HEADER_DEF /* ACPI common table header */
u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
};
/*
* ACPI 1.0 Firmware ACPI Control Structure (FACS)
*/
struct facs_descriptor_rev1 {
char signature[4]; /* ASCII table signature */
u32 length; /* Length of structure in bytes */
u32 hardware_signature; /* Hardware configuration signature */
u32 firmware_waking_vector; /* ACPI OS waking vector */
u32 global_lock; /* Global Lock */
/* Flags (32 bits) */
u8 S4bios_f:1; /* 00: S4BIOS support is present */
u8:7; /* 01-07: Reserved, must be zero */
u8 reserved1[3]; /* 08-31: Reserved, must be zero */
u8 reserved2[40]; /* Reserved, must be zero */
};
/*
* ACPI 1.0 Fixed ACPI Description Table (FADT)
*/
struct fadt_descriptor_rev1 {
ACPI_TABLE_HEADER_DEF /* ACPI common table header */
u32 firmware_ctrl; /* Physical address of FACS */
u32 dsdt; /* Physical address of DSDT */
u8 model; /* System Interrupt Model */
u8 reserved1; /* Reserved, must be zero */
u16 sci_int; /* System vector of SCI interrupt */
u32 smi_cmd; /* Port address of SMI command port */
u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
u8 reserved2; /* Reserved, must be zero */
u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */
u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
u8 gpe1_base; /* Offset in gpe model where gpe1 events start */
u8 reserved3; /* Reserved, must be zero */
u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */
u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */
u16 flush_size; /* Size of area read to flush caches */
u16 flush_stride; /* Stride used in flushing caches */
u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */
u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */
u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */
u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */
u8 century; /* Index to century in RTC CMOS RAM */
u8 reserved4[3]; /* Reserved, must be zero */
/* Flags (32 bits) */
u8 wb_invd:1; /* 00: The wbinvd instruction works properly */
u8 wb_invd_flush:1; /* 01: The wbinvd flushes but does not invalidate */
u8 proc_c1:1; /* 02: All processors support C1 state */
u8 plvl2_up:1; /* 03: C2 state works on MP system */
u8 pwr_button:1; /* 04: Power button is handled as a generic feature */
u8 sleep_button:1; /* 05: Sleep button is handled as a generic feature, or not present */
u8 fixed_rTC:1; /* 06: RTC wakeup stat not in fixed register space */
u8 rtcs4:1; /* 07: RTC wakeup stat not possible from S4 */
u8 tmr_val_ext:1; /* 08: tmr_val width is 32 bits (0 = 24 bits) */
u8:7; /* 09-15: Reserved, must be zero */
u8 reserved5[2]; /* 16-31: Reserved, must be zero */
};
#pragma pack()
#endif /* __ACTBL1_H__ */