linux/arch/m68k/include/asm/m54xxpci.h
Greg Ungerer 32be2acc7c m68k: add PCI bus support definitions for the ColdFire M54xx SoC family
Add all the required definitoins to support the ColdFire M54xx SoC PCI
hardware unit. These are strait out of the MCF5475 Reference Manual.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17 15:49:42 +10:00

139 lines
6.1 KiB
C

/****************************************************************************/
/*
* m54xxpci.h -- ColdFire 547x and 548x PCI bus support
*
* (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/****************************************************************************/
#ifndef M54XXPCI_H
#define M54XXPCI_H
/****************************************************************************/
/*
* The core set of PCI support registers are mapped into the MBAR region.
*/
#define PCIIDR (CONFIG_MBAR + 0xb00) /* PCI device/vendor ID */
#define PCISCR (CONFIG_MBAR + 0xb04) /* PCI status/command */
#define PCICCRIR (CONFIG_MBAR + 0xb08) /* PCI class/revision */
#define PCICR1 (CONFIG_MBAR + 0xb0c) /* PCI configuration 1 */
#define PCIBAR0 (CONFIG_MBAR + 0xb10) /* PCI base address 0 */
#define PCIBAR1 (CONFIG_MBAR + 0xb14) /* PCI base address 1 */
#define PCICCPR (CONFIG_MBAR + 0xb28) /* PCI cardbus CIS pointer */
#define PCISID (CONFIG_MBAR + 0xb2c) /* PCI subsystem IDs */
#define PCIERBAR (CONFIG_MBAR + 0xb30) /* PCI expansion ROM */
#define PCICPR (CONFIG_MBAR + 0xb34) /* PCI capabilities pointer */
#define PCICR2 (CONFIG_MBAR + 0xb3c) /* PCI configuration 2 */
#define PCIGSCR (CONFIG_MBAR + 0xb60) /* Global status/control */
#define PCITBATR0 (CONFIG_MBAR + 0xb64) /* Target base translation 0 */
#define PCITBATR1 (CONFIG_MBAR + 0xb68) /* Target base translation 1 */
#define PCITCR (CONFIG_MBAR + 0xb6c) /* Target control */
#define PCIIW0BTAR (CONFIG_MBAR + 0xb70) /* Initiator window 0 */
#define PCIIW1BTAR (CONFIG_MBAR + 0xb74) /* Initiator window 1 */
#define PCIIW2BTAR (CONFIG_MBAR + 0xb78) /* Initiator window 2 */
#define PCIIWCR (CONFIG_MBAR + 0xb80) /* Initiator window config */
#define PCIICR (CONFIG_MBAR + 0xb84) /* Initiator control */
#define PCIISR (CONFIG_MBAR + 0xb88) /* Initiator status */
#define PCICAR (CONFIG_MBAR + 0xbf8) /* Configuration address */
#define PCITPSR (CONFIG_MBAR + 0x8400) /* TX packet size */
#define PCITSAR (CONFIG_MBAR + 0x8404) /* TX start address */
#define PCITTCR (CONFIG_MBAR + 0x8408) /* TX transaction control */
#define PCITER (CONFIG_MBAR + 0x840c) /* TX enables */
#define PCITNAR (CONFIG_MBAR + 0x8410) /* TX next address */
#define PCITLWR (CONFIG_MBAR + 0x8414) /* TX last word */
#define PCITDCR (CONFIG_MBAR + 0x8418) /* TX done counts */
#define PCITSR (CONFIG_MBAR + 0x841c) /* TX status */
#define PCITFDR (CONFIG_MBAR + 0x8440) /* TX FIFO data */
#define PCITFSR (CONFIG_MBAR + 0x8444) /* TX FIFO status */
#define PCITFCR (CONFIG_MBAR + 0x8448) /* TX FIFO control */
#define PCITFAR (CONFIG_MBAR + 0x844c) /* TX FIFO alarm */
#define PCITFRPR (CONFIG_MBAR + 0x8450) /* TX FIFO read pointer */
#define PCITFWPR (CONFIG_MBAR + 0x8454) /* TX FIFO write pointer */
#define PCIRPSR (CONFIG_MBAR + 0x8480) /* RX packet size */
#define PCIRSAR (CONFIG_MBAR + 0x8484) /* RX start address */
#define PCIRTCR (CONFIG_MBAR + 0x8488) /* RX transaction control */
#define PCIRER (CONFIG_MBAR + 0x848c) /* RX enables */
#define PCIRNAR (CONFIG_MBAR + 0x8490) /* RX next address */
#define PCIRDCR (CONFIG_MBAR + 0x8498) /* RX done counts */
#define PCIRSR (CONFIG_MBAR + 0x849c) /* RX status */
#define PCIRFDR (CONFIG_MBAR + 0x84c0) /* RX FIFO data */
#define PCIRFSR (CONFIG_MBAR + 0x84c4) /* RX FIFO status */
#define PCIRFCR (CONFIG_MBAR + 0x84c8) /* RX FIFO control */
#define PCIRFAR (CONFIG_MBAR + 0x84cc) /* RX FIFO alarm */
#define PCIRFRPR (CONFIG_MBAR + 0x84d0) /* RX FIFO read pointer */
#define PCIRFWPR (CONFIG_MBAR + 0x84d4) /* RX FIFO write pointer */
#define PACR (CONFIG_MBAR + 0xc00) /* PCI arbiter control */
#define PASR (COFNIG_MBAR + 0xc04) /* PCI arbiter status */
/*
* Definitions for the Global status and control register.
*/
#define PCIGSCR_PE 0x20000000 /* Parity error detected */
#define PCIGSCR_SE 0x10000000 /* System error detected */
#define PCIGSCR_XCLKBIN 0x07000000 /* XLB2CLKIN mask */
#define PCIGSCR_PEE 0x00002000 /* Parity error intr enable */
#define PCIGSCR_SEE 0x00001000 /* System error intr enable */
#define PCIGSCR_RESET 0x00000001 /* Reset bit */
/*
* Bit definitions for the PCICAR configuration address register.
*/
#define PCICAR_E 0x80000000 /* Enable config space */
#define PCICAR_BUSN 16 /* Move bus bits */
#define PCICAR_DEVFNN 8 /* Move devfn bits */
#define PCICAR_DWORDN 0 /* Move dword bits */
/*
* The initiator windows hold the memory and IO mapping information.
* This macro creates the register values from the desired addresses.
*/
#define WXBTAR(hostaddr, pciaddr, size) \
(((hostaddr) & 0xff000000) | \
((((size) - 1) & 0xff000000) >> 8) | \
(((pciaddr) & 0xff000000) >> 16))
#define PCIIWCR_W0_MEM 0x00000000 /* Window 0 is memory */
#define PCIIWCR_W0_IO 0x08000000 /* Window 0 is IO */
#define PCIIWCR_W0_MRD 0x00000000 /* Window 0 memory read */
#define PCIIWCR_W0_MRDL 0x02000000 /* Window 0 memory read line */
#define PCIIWCR_W0_MRDM 0x04000000 /* Window 0 memory read mult */
#define PCIIWCR_W0_E 0x01000000 /* Window 0 enable */
#define PCIIWCR_W1_MEM 0x00000000 /* Window 0 is memory */
#define PCIIWCR_W1_IO 0x00080000 /* Window 0 is IO */
#define PCIIWCR_W1_MRD 0x00000000 /* Window 0 memory read */
#define PCIIWCR_W1_MRDL 0x00020000 /* Window 0 memory read line */
#define PCIIWCR_W1_MRDM 0x00040000 /* Window 0 memory read mult */
#define PCIIWCR_W1_E 0x00010000 /* Window 0 enable */
/*
* Bit definitions for the PCIBATR registers.
*/
#define PCITBATR0_E 0x00000001 /* Enable window 0 */
#define PCITBATR1_E 0x00000001 /* Enable window 1 */
/*
* PCI arbiter support definitions and macros.
*/
#define PACR_INTMPRI 0x00000001
#define PACR_EXTMPRI(x) (((x) & 0x1f) << 1)
#define PACR_INTMINTE 0x00010000
#define PACR_EXTMINTE(x) (((x) & 0x1f) << 17)
#define PACR_PKMD 0x40000000
#define PACR_DS 0x80000000
#define PCICR1_CL(x) ((x) & 0xf) /* Cacheline size field */
#define PCICR1_LT(x) (((x) & 0xff) << 8) /* Latency timer field */
/****************************************************************************/
#endif /* M54XXPCI_H */