linux/arch/arm/boot/dts/spear600.dtsi
Linus Torvalds ca2a88f56a MTD pull for 3.8
- Various cleanups especially in NAND tests
  - Add support for NAND flash on BCMA bus
  - DT support for sh_flctl and denali NAND drivers
  - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
  - Fix JFFS2 locking bug in ENOMEM failure path
  - New SPI flash chips, as usual
  - Support writing in 'reliable mode' for DiskOnChip G4
  - Debugfs support in nandsim
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAlDSAa4ACgkQdwG7hYl686MMcACeNYa//ghPtccb5L+IRXsqaFDL
 Yi4AoLWOaOjN8qM4KUF/bfMEkwNGAePz
 =DaAQ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...
2012-12-19 12:47:41 -08:00

206 lines
4.5 KiB
Plaintext

/*
* Copyright 2012 Stefan Roese <sr@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
compatible = "st,spear600";
cpus {
cpu@0 {
compatible = "arm,arm926ejs";
};
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
vic0: interrupt-controller@f1100000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1100000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@f1000000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1000000 0x1000>;
#interrupt-cells = <1>;
};
clcd@fc200000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xfc200000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
status = "disabled";
};
dma@fc400000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0xfc400000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <10>;
status = "disabled";
};
gmac: ethernet@e0800000 {
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupt-parent = <&vic1>;
interrupts = <24 23>;
interrupt-names = "macirq", "eth_wake_irq";
phy-mode = "gmii";
status = "disabled";
};
fsmc: flash@d1800000 {
compatible = "st,spear600-fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd1800000 0x1000 /* FSMC Register */
0xd2000000 0x0010 /* NAND Base DATA */
0xd2020000 0x0010 /* NAND Base ADDR */
0xd2010000 0x0010>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "disabled";
};
smi: flash@fc000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
status = "disabled";
};
ehci@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <27>;
status = "disabled";
};
ehci@e2000000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe2000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <29>;
status = "disabled";
};
ohci@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <26>;
status = "disabled";
};
ohci@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <28>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
serial@d0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0000000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <24>;
status = "disabled";
};
serial@d0080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0080000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <25>;
status = "disabled";
};
/* local/cpu GPIO */
gpio0: gpio@f0100000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xf0100000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <18>;
};
/* basic GPIO */
gpio1: gpio@fc980000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfc980000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <19>;
};
/* appl GPIO */
gpio2: gpio@d8100000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xd8100000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <4>;
};
i2c@d0200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xd0200000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <28>;
status = "disabled";
};
rtc@fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
interrupts = <10>;
status = "disabled";
};
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
interrupt-parent = <&vic0>;
interrupts = <16>;
};
};
};
};