linux/drivers/ata/ata_generic.c
Tejun Heo 2eab80ac0c [PATCH] libata: kill unnecessary sht->max_sectors initializations
sht->max_sectors is overrided unconditionally in ->slave_configure.
There's no reason to set it to any value.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-12-03 17:56:22 +09:00

257 lines
7.3 KiB
C

/*
* ata_generic.c - Generic PATA/SATA controller driver.
* Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved.
*
* Elements from ide/pci/generic.c
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
*
* May be copied or modified under the terms of the GNU General Public License
*
* Driver for PCI IDE interfaces implementing the standard bus mastering
* interface functionality. This assumes the BIOS did the drive set up and
* tuning for us. By default we do not grab all IDE class devices as they
* may have other drivers or need fixups to avoid problems. Instead we keep
* a default list of stuff without documentation/driver that appears to
* work.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "ata_generic"
#define DRV_VERSION "0.2.10"
/*
* A generic parallel ATA driver using libata
*/
/**
* generic_pre_reset - probe begin
* @ap: ATA port
*
* Set up cable type and use generic probe init
*/
static int generic_pre_reset(struct ata_port *ap)
{
ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap);
}
/**
* generic_error_handler - Probe specified port on PATA host controller
* @ap: Port to probe
* @classes:
*
* LOCKING:
* None (inherited from caller).
*/
static void generic_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}
/**
* generic_set_mode - mode setting
* @ap: interface to set up
*
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
* read the dma enabled bits from the PCI configuration of the device
* and respect them.
*/
static void generic_set_mode(struct ata_port *ap)
{
int dma_enabled = 0;
int i;
/* Bits 5 and 6 indicate if DMA is active on master/slave */
if (ap->ioaddr.bmdma_addr)
dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
/* We do need the right mode information for DMA or PIO
and this comes from the current configuration flags */
if (dma_enabled & (1 << (5 + i))) {
dev->xfer_mode = XFER_MW_DMA_0;
dev->xfer_shift = ATA_SHIFT_MWDMA;
dev->flags &= ~ATA_DFLAG_PIO;
} else {
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
}
}
}
}
static struct scsi_host_template generic_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations generic_port_ops = {
.set_mode = generic_set_mode,
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.data_xfer = ata_pio_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = generic_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
};
static int all_generic_ide; /* Set to claim all devices */
/**
* ata_generic_init - attach generic IDE
* @dev: PCI device found
* @id: match entry
*
* Called each time a matching IDE interface is found. We check if the
* interface is one we wish to claim and if so we perform any chip
* specific hacks then let the ATA layer do the heavy lifting.
*/
static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
u16 command;
static struct ata_port_info info = {
.sht = &generic_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x3f,
.port_ops = &generic_port_ops
};
static struct ata_port_info *port_info[2] = { &info, &info };
/* Don't use the generic entry unless instructed to do so */
if (id->driver_data == 1 && all_generic_ide == 0)
return -ENODEV;
/* Devices that need care */
if (dev->vendor == PCI_VENDOR_ID_UMC &&
dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
(!(PCI_FUNC(dev->devfn) & 1)))
return -ENODEV;
if (dev->vendor == PCI_VENDOR_ID_OPTI &&
dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
(!(PCI_FUNC(dev->devfn) & 1)))
return -ENODEV;
/* Don't re-enable devices in generic mode or we will break some
motherboards with disabled and unused IDE controllers */
pci_read_config_word(dev, PCI_COMMAND, &command);
if (!(command & PCI_COMMAND_IO))
return -ENODEV;
if (dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_clear_simplex(dev);
return ata_pci_init_one(dev, port_info, 2);
}
static struct pci_device_id ata_generic[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), },
{ PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), },
{ PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), },
{ PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), },
{ PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), },
{ PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), },
{ PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
/* Must come last. If you add entries adjust this table appropriately */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
{ 0, },
};
static struct pci_driver ata_generic_pci_driver = {
.name = DRV_NAME,
.id_table = ata_generic,
.probe = ata_generic_init_one,
.remove = ata_pci_remove_one,
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
};
static int __init ata_generic_init(void)
{
return pci_register_driver(&ata_generic_pci_driver);
}
static void __exit ata_generic_exit(void)
{
pci_unregister_driver(&ata_generic_pci_driver);
}
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for generic ATA");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, ata_generic);
MODULE_VERSION(DRV_VERSION);
module_init(ata_generic_init);
module_exit(ata_generic_exit);
module_param(all_generic_ide, int, 0);