linux/drivers/spi/spi_s3c24xx.c
Linus Torvalds bf931a01a2 Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi: spi_txx9.c: use resource_size()
  spi: spi_sh_sci.c: use resource_size()
  spi: spi_mpc8xxx.c: use resource_size()
  spi: spi_bfin5xx.c: use resource_size()
  spi: atmel_spi.c: use resource_size()
  spi: Add s3c64xx SPI Controller driver
  atmel_spi: fix dma addr calculation for len > BUFFER_SIZE
  spi_s3c24xx: add FIQ pseudo-DMA support
  spi: controller driver for Designware SPI core
  spidev: add proper section markers
  spidev: use DECLARE_BITMAP instead of declaring the array
2009-12-17 15:59:05 -08:00

746 lines
16 KiB
C

/* linux/drivers/spi/spi_s3c24xx.c
*
* Copyright (c) 2006 Ben Dooks
* Copyright 2006-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <plat/regs-spi.h>
#include <mach/spi.h>
#include <plat/fiq.h>
#include <asm/fiq.h>
#include "spi_s3c24xx_fiq.h"
/**
* s3c24xx_spi_devstate - per device data
* @hz: Last frequency calculated for @sppre field.
* @mode: Last mode setting for the @spcon field.
* @spcon: Value to write to the SPCON register.
* @sppre: Value to write to the SPPRE register.
*/
struct s3c24xx_spi_devstate {
unsigned int hz;
unsigned int mode;
u8 spcon;
u8 sppre;
};
enum spi_fiq_mode {
FIQ_MODE_NONE = 0,
FIQ_MODE_TX = 1,
FIQ_MODE_RX = 2,
FIQ_MODE_TXRX = 3,
};
struct s3c24xx_spi {
/* bitbang has to be first */
struct spi_bitbang bitbang;
struct completion done;
void __iomem *regs;
int irq;
int len;
int count;
struct fiq_handler fiq_handler;
enum spi_fiq_mode fiq_mode;
unsigned char fiq_inuse;
unsigned char fiq_claimed;
void (*set_cs)(struct s3c2410_spi_info *spi,
int cs, int pol);
/* data buffers */
const unsigned char *tx;
unsigned char *rx;
struct clk *clk;
struct resource *ioarea;
struct spi_master *master;
struct spi_device *curdev;
struct device *dev;
struct s3c2410_spi_info *pdata;
};
#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
{
return spi_master_get_devdata(sdev->master);
}
static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
{
gpio_set_value(spi->pin_cs, pol);
}
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
{
struct s3c24xx_spi_devstate *cs = spi->controller_state;
struct s3c24xx_spi *hw = to_hw(spi);
unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
/* change the chipselect state and the state of the spi engine clock */
switch (value) {
case BITBANG_CS_INACTIVE:
hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
writeb(cs->spcon, hw->regs + S3C2410_SPCON);
break;
case BITBANG_CS_ACTIVE:
writeb(cs->spcon | S3C2410_SPCON_ENSCK,
hw->regs + S3C2410_SPCON);
hw->set_cs(hw->pdata, spi->chip_select, cspol);
break;
}
}
static int s3c24xx_spi_update_state(struct spi_device *spi,
struct spi_transfer *t)
{
struct s3c24xx_spi *hw = to_hw(spi);
struct s3c24xx_spi_devstate *cs = spi->controller_state;
unsigned int bpw;
unsigned int hz;
unsigned int div;
unsigned long clk;
bpw = t ? t->bits_per_word : spi->bits_per_word;
hz = t ? t->speed_hz : spi->max_speed_hz;
if (!bpw)
bpw = 8;
if (!hz)
hz = spi->max_speed_hz;
if (bpw != 8) {
dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
return -EINVAL;
}
if (spi->mode != cs->mode) {
u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK;
if (spi->mode & SPI_CPHA)
spcon |= S3C2410_SPCON_CPHA_FMTB;
if (spi->mode & SPI_CPOL)
spcon |= S3C2410_SPCON_CPOL_HIGH;
cs->mode = spi->mode;
cs->spcon = spcon;
}
if (cs->hz != hz) {
clk = clk_get_rate(hw->clk);
div = DIV_ROUND_UP(clk, hz * 2) - 1;
if (div > 255)
div = 255;
dev_dbg(&spi->dev, "pre-scaler=%d (wanted %d, got %ld)\n",
div, hz, clk / (2 * (div + 1)));
cs->hz = hz;
cs->sppre = div;
}
return 0;
}
static int s3c24xx_spi_setupxfer(struct spi_device *spi,
struct spi_transfer *t)
{
struct s3c24xx_spi_devstate *cs = spi->controller_state;
struct s3c24xx_spi *hw = to_hw(spi);
int ret;
ret = s3c24xx_spi_update_state(spi, t);
if (!ret)
writeb(cs->sppre, hw->regs + S3C2410_SPPRE);
return ret;
}
static int s3c24xx_spi_setup(struct spi_device *spi)
{
struct s3c24xx_spi_devstate *cs = spi->controller_state;
struct s3c24xx_spi *hw = to_hw(spi);
int ret;
/* allocate settings on the first call */
if (!cs) {
cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL);
if (!cs) {
dev_err(&spi->dev, "no memory for controller state\n");
return -ENOMEM;
}
cs->spcon = SPCON_DEFAULT;
cs->hz = -1;
spi->controller_state = cs;
}
/* initialise the state from the device */
ret = s3c24xx_spi_update_state(spi, NULL);
if (ret)
return ret;
spin_lock(&hw->bitbang.lock);
if (!hw->bitbang.busy) {
hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
/* need to ndelay for 0.5 clocktick ? */
}
spin_unlock(&hw->bitbang.lock);
return 0;
}
static void s3c24xx_spi_cleanup(struct spi_device *spi)
{
kfree(spi->controller_state);
}
static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
{
return hw->tx ? hw->tx[count] : 0;
}
#ifdef CONFIG_SPI_S3C24XX_FIQ
/* Support for FIQ based pseudo-DMA to improve the transfer speed.
*
* This code uses the assembly helper in spi_s3c24xx_spi.S which is
* used by the FIQ core to move data between main memory and the peripheral
* block. Since this is code running on the processor, there is no problem
* with cache coherency of the buffers, so we can use any buffer we like.
*/
/**
* struct spi_fiq_code - FIQ code and header
* @length: The length of the code fragment, excluding this header.
* @ack_offset: The offset from @data to the word to place the IRQ ACK bit at.
* @data: The code itself to install as a FIQ handler.
*/
struct spi_fiq_code {
u32 length;
u32 ack_offset;
u8 data[0];
};
extern struct spi_fiq_code s3c24xx_spi_fiq_txrx;
extern struct spi_fiq_code s3c24xx_spi_fiq_tx;
extern struct spi_fiq_code s3c24xx_spi_fiq_rx;
/**
* ack_bit - turn IRQ into IRQ acknowledgement bit
* @irq: The interrupt number
*
* Returns the bit to write to the interrupt acknowledge register.
*/
static inline u32 ack_bit(unsigned int irq)
{
return 1 << (irq - IRQ_EINT0);
}
/**
* s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer
* @hw: The hardware state.
*
* Claim the FIQ handler (only one can be active at any one time) and
* then setup the correct transfer code for this transfer.
*
* This call updates all the necessary state information if sucessful,
* so the caller does not need to do anything more than start the transfer
* as normal, since the IRQ will have been re-routed to the FIQ handler.
*/
void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
{
struct pt_regs regs;
enum spi_fiq_mode mode;
struct spi_fiq_code *code;
int ret;
if (!hw->fiq_claimed) {
/* try and claim fiq if we haven't got it, and if not
* then return and simply use another transfer method */
ret = claim_fiq(&hw->fiq_handler);
if (ret)
return;
}
if (hw->tx && !hw->rx)
mode = FIQ_MODE_TX;
else if (hw->rx && !hw->tx)
mode = FIQ_MODE_RX;
else
mode = FIQ_MODE_TXRX;
regs.uregs[fiq_rspi] = (long)hw->regs;
regs.uregs[fiq_rrx] = (long)hw->rx;
regs.uregs[fiq_rtx] = (long)hw->tx + 1;
regs.uregs[fiq_rcount] = hw->len - 1;
regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ;
set_fiq_regs(&regs);
if (hw->fiq_mode != mode) {
u32 *ack_ptr;
hw->fiq_mode = mode;
switch (mode) {
case FIQ_MODE_TX:
code = &s3c24xx_spi_fiq_tx;
break;
case FIQ_MODE_RX:
code = &s3c24xx_spi_fiq_rx;
break;
case FIQ_MODE_TXRX:
code = &s3c24xx_spi_fiq_txrx;
break;
default:
code = NULL;
}
BUG_ON(!code);
ack_ptr = (u32 *)&code->data[code->ack_offset];
*ack_ptr = ack_bit(hw->irq);
set_fiq_handler(&code->data, code->length);
}
s3c24xx_set_fiq(hw->irq, true);
hw->fiq_mode = mode;
hw->fiq_inuse = 1;
}
/**
* s3c24xx_spi_fiqop - FIQ core code callback
* @pw: Data registered with the handler
* @release: Whether this is a release or a return.
*
* Called by the FIQ code when another module wants to use the FIQ, so
* return whether we are currently using this or not and then update our
* internal state.
*/
static int s3c24xx_spi_fiqop(void *pw, int release)
{
struct s3c24xx_spi *hw = pw;
int ret = 0;
if (release) {
if (hw->fiq_inuse)
ret = -EBUSY;
/* note, we do not need to unroute the FIQ, as the FIQ
* vector code de-routes it to signal the end of transfer */
hw->fiq_mode = FIQ_MODE_NONE;
hw->fiq_claimed = 0;
} else {
hw->fiq_claimed = 1;
}
return ret;
}
/**
* s3c24xx_spi_initfiq - setup the information for the FIQ core
* @hw: The hardware state.
*
* Setup the fiq_handler block to pass to the FIQ core.
*/
static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *hw)
{
hw->fiq_handler.dev_id = hw;
hw->fiq_handler.name = dev_name(hw->dev);
hw->fiq_handler.fiq_op = s3c24xx_spi_fiqop;
}
/**
* s3c24xx_spi_usefiq - return if we should be using FIQ.
* @hw: The hardware state.
*
* Return true if the platform data specifies whether this channel is
* allowed to use the FIQ.
*/
static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *hw)
{
return hw->pdata->use_fiq;
}
/**
* s3c24xx_spi_usingfiq - return if channel is using FIQ
* @spi: The hardware state.
*
* Return whether the channel is currently using the FIQ (separate from
* whether the FIQ is claimed).
*/
static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *spi)
{
return spi->fiq_inuse;
}
#else
static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *s) { }
static inline void s3c24xx_spi_tryfiq(struct s3c24xx_spi *s) { }
static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *s) { return false; }
static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *s) { return false; }
#endif /* CONFIG_SPI_S3C24XX_FIQ */
static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
{
struct s3c24xx_spi *hw = to_hw(spi);
hw->tx = t->tx_buf;
hw->rx = t->rx_buf;
hw->len = t->len;
hw->count = 0;
init_completion(&hw->done);
hw->fiq_inuse = 0;
if (s3c24xx_spi_usefiq(hw) && t->len >= 3)
s3c24xx_spi_tryfiq(hw);
/* send the first byte */
writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
wait_for_completion(&hw->done);
return hw->count;
}
static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
{
struct s3c24xx_spi *hw = dev;
unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
unsigned int count = hw->count;
if (spsta & S3C2410_SPSTA_DCOL) {
dev_dbg(hw->dev, "data-collision\n");
complete(&hw->done);
goto irq_done;
}
if (!(spsta & S3C2410_SPSTA_READY)) {
dev_dbg(hw->dev, "spi not ready for tx?\n");
complete(&hw->done);
goto irq_done;
}
if (!s3c24xx_spi_usingfiq(hw)) {
hw->count++;
if (hw->rx)
hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
count++;
if (count < hw->len)
writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
else
complete(&hw->done);
} else {
hw->count = hw->len;
hw->fiq_inuse = 0;
if (hw->rx)
hw->rx[hw->len-1] = readb(hw->regs + S3C2410_SPRDAT);
complete(&hw->done);
}
irq_done:
return IRQ_HANDLED;
}
static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
{
/* for the moment, permanently enable the clock */
clk_enable(hw->clk);
/* program defaults into the registers */
writeb(0xff, hw->regs + S3C2410_SPPRE);
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
if (hw->pdata) {
if (hw->set_cs == s3c24xx_spi_gpiocs)
gpio_direction_output(hw->pdata->pin_cs, 1);
if (hw->pdata->gpio_setup)
hw->pdata->gpio_setup(hw->pdata, 1);
}
}
static int __init s3c24xx_spi_probe(struct platform_device *pdev)
{
struct s3c2410_spi_info *pdata;
struct s3c24xx_spi *hw;
struct spi_master *master;
struct resource *res;
int err = 0;
master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
if (master == NULL) {
dev_err(&pdev->dev, "No memory for spi_master\n");
err = -ENOMEM;
goto err_nomem;
}
hw = spi_master_get_devdata(master);
memset(hw, 0, sizeof(struct s3c24xx_spi));
hw->master = spi_master_get(master);
hw->pdata = pdata = pdev->dev.platform_data;
hw->dev = &pdev->dev;
if (pdata == NULL) {
dev_err(&pdev->dev, "No platform data supplied\n");
err = -ENOENT;
goto err_no_pdata;
}
platform_set_drvdata(pdev, hw);
init_completion(&hw->done);
/* initialise fiq handler */
s3c24xx_spi_initfiq(hw);
/* setup the master state. */
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = pdata->bus_num;
/* setup the state for the bitbang driver */
hw->bitbang.master = hw->master;
hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
hw->bitbang.chipselect = s3c24xx_spi_chipsel;
hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
hw->master->setup = s3c24xx_spi_setup;
hw->master->cleanup = s3c24xx_spi_cleanup;
dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
/* find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
err = -ENOENT;
goto err_no_iores;
}
hw->ioarea = request_mem_region(res->start, resource_size(res),
pdev->name);
if (hw->ioarea == NULL) {
dev_err(&pdev->dev, "Cannot reserve region\n");
err = -ENXIO;
goto err_no_iores;
}
hw->regs = ioremap(res->start, resource_size(res));
if (hw->regs == NULL) {
dev_err(&pdev->dev, "Cannot map IO\n");
err = -ENXIO;
goto err_no_iomap;
}
hw->irq = platform_get_irq(pdev, 0);
if (hw->irq < 0) {
dev_err(&pdev->dev, "No IRQ specified\n");
err = -ENOENT;
goto err_no_irq;
}
err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
if (err) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
goto err_no_irq;
}
hw->clk = clk_get(&pdev->dev, "spi");
if (IS_ERR(hw->clk)) {
dev_err(&pdev->dev, "No clock for device\n");
err = PTR_ERR(hw->clk);
goto err_no_clk;
}
/* setup any gpio we can */
if (!pdata->set_cs) {
if (pdata->pin_cs < 0) {
dev_err(&pdev->dev, "No chipselect pin\n");
goto err_register;
}
err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
if (err) {
dev_err(&pdev->dev, "Failed to get gpio for cs\n");
goto err_register;
}
hw->set_cs = s3c24xx_spi_gpiocs;
gpio_direction_output(pdata->pin_cs, 1);
} else
hw->set_cs = pdata->set_cs;
s3c24xx_spi_initialsetup(hw);
/* register our spi controller */
err = spi_bitbang_start(&hw->bitbang);
if (err) {
dev_err(&pdev->dev, "Failed to register SPI master\n");
goto err_register;
}
return 0;
err_register:
if (hw->set_cs == s3c24xx_spi_gpiocs)
gpio_free(pdata->pin_cs);
clk_disable(hw->clk);
clk_put(hw->clk);
err_no_clk:
free_irq(hw->irq, hw);
err_no_irq:
iounmap(hw->regs);
err_no_iomap:
release_resource(hw->ioarea);
kfree(hw->ioarea);
err_no_iores:
err_no_pdata:
spi_master_put(hw->master);
err_nomem:
return err;
}
static int __exit s3c24xx_spi_remove(struct platform_device *dev)
{
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
platform_set_drvdata(dev, NULL);
spi_unregister_master(hw->master);
clk_disable(hw->clk);
clk_put(hw->clk);
free_irq(hw->irq, hw);
iounmap(hw->regs);
if (hw->set_cs == s3c24xx_spi_gpiocs)
gpio_free(hw->pdata->pin_cs);
release_resource(hw->ioarea);
kfree(hw->ioarea);
spi_master_put(hw->master);
return 0;
}
#ifdef CONFIG_PM
static int s3c24xx_spi_suspend(struct device *dev)
{
struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev));
if (hw->pdata && hw->pdata->gpio_setup)
hw->pdata->gpio_setup(hw->pdata, 0);
clk_disable(hw->clk);
return 0;
}
static int s3c24xx_spi_resume(struct device *dev)
{
struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev));
s3c24xx_spi_initialsetup(hw);
return 0;
}
static const struct dev_pm_ops s3c24xx_spi_pmops = {
.suspend = s3c24xx_spi_suspend,
.resume = s3c24xx_spi_resume,
};
#define S3C24XX_SPI_PMOPS &s3c24xx_spi_pmops
#else
#define S3C24XX_SPI_PMOPS NULL
#endif /* CONFIG_PM */
MODULE_ALIAS("platform:s3c2410-spi");
static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
.driver = {
.name = "s3c2410-spi",
.owner = THIS_MODULE,
.pm = S3C24XX_SPI_PMOPS,
},
};
static int __init s3c24xx_spi_init(void)
{
return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
}
static void __exit s3c24xx_spi_exit(void)
{
platform_driver_unregister(&s3c24xx_spi_driver);
}
module_init(s3c24xx_spi_init);
module_exit(s3c24xx_spi_exit);
MODULE_DESCRIPTION("S3C24XX SPI Driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");