linux/drivers/net/wireless/iwlwifi/iwl-shared.h
Emmanuel Grumbach 464021ffc1 iwlagn: move the check_empty logic to the transport layer
This logic is responsible to tell mac80211 when the HW queues are
empty and the BA session can be started / torn down.

Fix a bug on the way:
When the the Tx BA session is stopped and the HW queues aren't empty,
we stop the SW queue to drain the HW queue and then switch to the
legacy HW queue. This is the IWL_EMPTYING_HW_QUEUE_DELBA state.

While in this state, we never wake the SW queue, even when the HW
queue is almost empty, since we need to drain it completely. Look
at iwl_trans_pcie_reclaim regarding this.

Once the HW queue is really empty, we must wake the SW queue in order
to get traffic to the legacy queue.
This step was missing leading to an odd situation were the traffic
would just stall after we tore down a Tx BA session while the HW
queue was not empty.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29 15:33:00 -04:00

422 lines
12 KiB
C

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __iwl_shared_h__
#define __iwl_shared_h__
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/gfp.h>
#include <net/mac80211.h>
#include "iwl-commands.h"
/*This files includes all the types / functions that are exported by the
* upper layer to the bus and transport layer */
struct iwl_cfg;
struct iwl_bus;
struct iwl_priv;
struct iwl_sensitivity_ranges;
struct iwl_trans_ops;
#define DRV_NAME "iwlagn"
#define IWLWIFI_VERSION "in-tree:"
#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
#define DRV_AUTHOR "<ilw@linux.intel.com>"
extern struct iwl_mod_params iwlagn_mod_params;
/**
* struct iwl_mod_params
* @sw_crypto: using hardware encryption, default = 0
* @num_of_queues: number of tx queue, HW dependent
* @disable_11n: 11n capabilities enabled, default = 0
* @amsdu_size_8K: enable 8K amsdu size, default = 1
* @antenna: both antennas (use diversity), default = 0
* @restart_fw: restart firmware, default = 1
* @plcp_check: enable plcp health check, default = true
* @ack_check: disable ack health check, default = false
* @wd_disable: enable stuck queue check, default = false
* @bt_coex_active: enable bt coex, default = true
* @led_mode: system default, default = 0
* @no_sleep_autoadjust: disable autoadjust, default = true
* @power_save: disable power save, default = false
* @power_level: power level, default = 1
* @debug_level: levels are IWL_DL_*
* @ant_coupling: antenna coupling in dB, default = 0
* @bt_ch_announce: BT channel inhibition, default = enable
* @wanted_ucode_alternative: ucode alternative to use, default = 1
* @auto_agg: enable agg. without check, default = true
*/
struct iwl_mod_params {
int sw_crypto;
int num_of_queues;
int disable_11n;
int amsdu_size_8K;
int antenna;
int restart_fw;
bool plcp_check;
bool ack_check;
bool wd_disable;
bool bt_coex_active;
int led_mode;
bool no_sleep_autoadjust;
bool power_save;
int power_level;
u32 debug_level;
int ant_coupling;
bool bt_ch_announce;
int wanted_ucode_alternative;
bool auto_agg;
};
/**
* struct iwl_hw_params
* @max_txq_num: Max # Tx queues supported
* @num_ampdu_queues: num of ampdu queues
* @tx/rx_chains_num: Number of TX/RX chains
* @valid_tx/rx_ant: usable antennas
* @max_stations:
* @ht40_channel: is 40MHz width possible in band 2.4
* @beacon_time_tsf_bits: number of valid tsf bits for beacon time
* @sku:
* @rx_page_order: Rx buffer page order
* @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
* BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
* @sw_crypto: 0 for hw, 1 for sw
* @max_xxx_size: for ucode uses
* @ct_kill_threshold: temperature threshold
* @calib_init_cfg: setup initial calibrations for the hw
* @calib_rt_cfg: setup runtime calibrations for the hw
* @struct iwl_sensitivity_ranges: range of sensitivity values
*/
struct iwl_hw_params {
u8 max_txq_num;
u8 num_ampdu_queues;
u8 tx_chains_num;
u8 rx_chains_num;
u8 valid_tx_ant;
u8 valid_rx_ant;
u8 max_stations;
u8 ht40_channel;
bool shadow_reg_enable;
u16 beacon_time_tsf_bits;
u16 sku;
u32 rx_page_order;
u32 max_inst_size;
u32 max_data_size;
u32 ct_kill_threshold; /* value in hw-dependent units */
u32 ct_kill_exit_threshold; /* value in hw-dependent units */
/* for 1000, 6000 series and up */
u32 calib_init_cfg;
u32 calib_rt_cfg;
const struct iwl_sensitivity_ranges *sens;
};
/**
* struct iwl_ht_agg - aggregation status while waiting for block-ack
* @txq_id: Tx queue used for Tx attempt
* @wait_for_ba: Expect block-ack before next Tx reply
* @rate_n_flags: Rate at which Tx was attempted
*
* If REPLY_TX indicates that aggregation was attempted, driver must wait
* for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info
* until block ack arrives.
*/
struct iwl_ht_agg {
u16 txq_id;
u16 wait_for_ba;
u32 rate_n_flags;
#define IWL_AGG_OFF 0
#define IWL_AGG_ON 1
#define IWL_EMPTYING_HW_QUEUE_ADDBA 2
#define IWL_EMPTYING_HW_QUEUE_DELBA 3
u8 state;
};
struct iwl_tid_data {
u16 seq_number; /* agn only */
u16 tfds_in_queue;
struct iwl_ht_agg agg;
};
/**
* struct iwl_shared - shared fields for all the layers of the driver
*
* @dbg_level_dev: dbg level set per device. Prevails on
* iwlagn_mod_params.debug_level if set (!= 0)
* @ucode_owner: IWL_OWNERSHIP_*
* @cmd_queue: command queue number
* @status: STATUS_*
* @bus: pointer to the bus layer data
* @priv: pointer to the upper layer data
* @hw_params: see struct iwl_hw_params
* @workqueue: the workqueue used by all the layers of the driver
* @lock: protect general shared data
* @sta_lock: protects the station table.
* If lock and sta_lock are needed, lock must be acquired first.
* @mutex:
*/
struct iwl_shared {
#ifdef CONFIG_IWLWIFI_DEBUG
u32 dbg_level_dev;
#endif /* CONFIG_IWLWIFI_DEBUG */
#define IWL_OWNERSHIP_DRIVER 0
#define IWL_OWNERSHIP_TM 1
u8 ucode_owner;
u8 cmd_queue;
unsigned long status;
bool wowlan;
struct iwl_bus *bus;
struct iwl_priv *priv;
struct iwl_trans *trans;
struct iwl_hw_params hw_params;
struct workqueue_struct *workqueue;
spinlock_t lock;
spinlock_t sta_lock;
struct mutex mutex;
struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT];
};
/*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */
#define priv(_m) ((_m)->shrd->priv)
#define bus(_m) ((_m)->shrd->bus)
#define trans(_m) ((_m)->shrd->trans)
#define hw_params(_m) ((_m)->shrd->hw_params)
#ifdef CONFIG_IWLWIFI_DEBUG
/*
* iwl_get_debug_level: Return active debug level for device
*
* Using sysfs it is possible to set per device debug level. This debug
* level will be used if set, otherwise the global debug level which can be
* set via module parameter is used.
*/
static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
{
if (shrd->dbg_level_dev)
return shrd->dbg_level_dev;
else
return iwlagn_mod_params.debug_level;
}
#else
static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
{
return iwlagn_mod_params.debug_level;
}
#endif
static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page)
{
free_pages(page, shrd->hw_params.rx_page_order);
}
struct iwl_rx_mem_buffer {
dma_addr_t page_dma;
struct page *page;
struct list_head list;
};
#define rxb_addr(r) page_address(r->page)
/*
* mac80211 queues, ACs, hardware queues, FIFOs.
*
* Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
*
* Mac80211 uses the following numbers, which we get as from it
* by way of skb_get_queue_mapping(skb):
*
* VO 0
* VI 1
* BE 2
* BK 3
*
*
* Regular (not A-MPDU) frames are put into hardware queues corresponding
* to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
* own queue per aggregation session (RA/TID combination), such queues are
* set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
* order to map frames to the right queue, we also need an AC->hw queue
* mapping. This is implemented here.
*
* Due to the way hw queues are set up (by the hw specific modules like
* iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity
* mapping.
*/
static const u8 tid_to_ac[] = {
IEEE80211_AC_BE,
IEEE80211_AC_BK,
IEEE80211_AC_BK,
IEEE80211_AC_BE,
IEEE80211_AC_VI,
IEEE80211_AC_VI,
IEEE80211_AC_VO,
IEEE80211_AC_VO
};
static inline int get_ac_from_tid(u16 tid)
{
if (likely(tid < ARRAY_SIZE(tid_to_ac)))
return tid_to_ac[tid];
/* no support for TIDs 8-15 yet */
return -EINVAL;
}
enum iwl_rxon_context_id {
IWL_RXON_CTX_BSS,
IWL_RXON_CTX_PAN,
NUM_IWL_RXON_CTX
};
#ifdef CONFIG_PM
int iwl_suspend(struct iwl_priv *priv);
int iwl_resume(struct iwl_priv *priv);
#endif /* !CONFIG_PM */
int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg);
void __devexit iwl_remove(struct iwl_priv * priv);
void iwl_start_tx_ba_trans_ready(struct iwl_priv *priv,
enum iwl_rxon_context_id ctx,
u8 sta_id, u8 tid);
void iwl_stop_tx_ba_trans_ready(struct iwl_priv *priv,
enum iwl_rxon_context_id ctx,
u8 sta_id, u8 tid);
/*****************************************************
* DRIVER STATUS FUNCTIONS
******************************************************/
#define STATUS_HCMD_ACTIVE 0 /* host command in progress */
/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
#define STATUS_INT_ENABLED 2
#define STATUS_RF_KILL_HW 3
#define STATUS_CT_KILL 4
#define STATUS_INIT 5
#define STATUS_ALIVE 6
#define STATUS_READY 7
#define STATUS_TEMPERATURE 8
#define STATUS_GEO_CONFIGURED 9
#define STATUS_EXIT_PENDING 10
#define STATUS_STATISTICS 12
#define STATUS_SCANNING 13
#define STATUS_SCAN_ABORTING 14
#define STATUS_SCAN_HW 15
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
#define STATUS_DEVICE_ENABLED 18
#define STATUS_CHANNEL_SWITCH_PENDING 19
static inline int iwl_is_ready(struct iwl_shared *shrd)
{
/* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
* set but EXIT_PENDING is not */
return test_bit(STATUS_READY, &shrd->status) &&
test_bit(STATUS_GEO_CONFIGURED, &shrd->status) &&
!test_bit(STATUS_EXIT_PENDING, &shrd->status);
}
static inline int iwl_is_alive(struct iwl_shared *shrd)
{
return test_bit(STATUS_ALIVE, &shrd->status);
}
static inline int iwl_is_init(struct iwl_shared *shrd)
{
return test_bit(STATUS_INIT, &shrd->status);
}
static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd)
{
return test_bit(STATUS_RF_KILL_HW, &shrd->status);
}
static inline int iwl_is_rfkill(struct iwl_shared *shrd)
{
return iwl_is_rfkill_hw(shrd);
}
static inline int iwl_is_ctkill(struct iwl_shared *shrd)
{
return test_bit(STATUS_CT_KILL, &shrd->status);
}
static inline int iwl_is_ready_rf(struct iwl_shared *shrd)
{
if (iwl_is_rfkill(shrd))
return 0;
return iwl_is_ready(shrd);
}
#endif /* #__iwl_shared_h__ */