Andreas Klinger 461631face iio: hx711: add delay until DOUT is ready ... On a system with parasitic capacitance it turned out that DOUT is not ready after 100 ns after PD_SCK has raised. A measurement showed almost 1000 ns until DOUT has reached its correct value. With this patch its now possible to wait until data is ready. The wait time should not be higher than the maximum PD_SCK high time which is corresponding to the datasheet 50000 ns. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2018-07-15 09:36:38 +01:00
..
accel	iio: accel: adxl345: add sampling frequency support	2018-07-15 09:19:06 +01:00
adc	iio: hx711: add delay until DOUT is ready	2018-07-15 09:36:38 +01:00
afe	iio: afe: rescale: new driver	2018-04-28 18:03:22 +01:00
amplifiers	iio: amplifiers: ad8366: move channel init before iio_device_register()	2018-05-22 18:13:45 +01:00
buffer	iio:kfifo_buf: check for uint overflow	2018-03-30 11:16:12 +01:00
chemical	1st round of IIO new device support, features and cleanup for the 4.18 cycle	2018-05-11 09:50:04 +02:00
common	Staging/IIO patches for 4.18-rc1	2018-06-09 10:32:39 -07:00
counter	iio: 104-quad-8: Provide defines for magic numbers	2018-06-10 11:52:30 +01:00
dac	iio: dac: Add AD5758 support	2018-07-07 18:16:32 +01:00
dummy	iio:dummy: Add extra paragraphs on Kconfig	2018-03-03 15:20:16 +00:00
frequency	iio:frequency: drop assign iio_info.driver_module	2017-08-22 21:28:20 +01:00
gyro	iio: Replace occurrences of magic number 0 by IIO_CHAN_INFO_RAW	2018-03-07 20:14:36 +00:00
health	iio: add SPDX identifier for various drivers	2018-02-18 11:55:19 +00:00
humidity	iio: add SPDX identifier for various drivers	2018-02-18 11:55:19 +00:00
imu	iio:imu:adis: Mark expected switch fall-throughs	2018-07-07 18:01:05 +01:00
light	iio: tsl2583: correct values in integration_time_available	2018-05-20 10:29:28 +01:00
magnetometer	iio: magnetometer: mag3110: Add ability to run in continuous mode	2018-05-12 11:01:59 +01:00
multiplexer	treewide: devm_kzalloc() -> devm_kcalloc()	2018-06-12 16:19:22 -07:00
orientation	iio:orientation: drop assign iio_info.driver_module	2017-08-22 21:33:36 +01:00
potentiometer	iio: potentiometer: mcp4531: switch to using .probe_new	2018-04-15 18:12:51 +01:00
potentiostat	iio: potentiostat: lmp91000: add LMP91002 support	2018-05-12 11:02:44 +01:00
pressure	1st round of IIO new device support, features and cleanup for the 4.18 cycle	2018-05-11 09:50:04 +02:00
proximity	Second set of new device support, features and cleanup for IIO in the 4.17 cycle	2018-03-14 12:32:11 +01:00
resolver	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
temperature	iio temperature/mlx90632: silence a static checker warning	2018-02-24 13:32:05 +00:00
trigger	iio: stm32: Adopt SPDX identifier	2018-01-08 16:03:41 +01:00
iio_core.h	the rest of drivers/*: annotate ->poll() instances	2017-11-28 11:06:58 -05:00
iio_core_trigger.h
industrialio-buffer.c	First round of IIO fixes for the 4.16 cycle.	2018-02-20 10:03:22 +01:00
industrialio-configfs.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-core.c	iio: use timespec64 based interfaces for iio_get_time_ns()	2018-06-24 14:45:06 +01:00
industrialio-event.c	vfs: do bulk POLL* -> EPOLL* replacement	2018-02-11 14:34:03 -08:00
industrialio-sw-device.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-sw-trigger.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c	treewide: kzalloc() -> kcalloc()	2018-06-12 16:19:22 -07:00
Kconfig	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
Makefile	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00