linux/drivers/vfio/pci/vfio_pci.c
Linus Torvalds 45cb5230f8 VFIO updates for v4.6-rc1
Various enablers for assignment of Intel graphics devices and future
 support of vGPU devices (Alex Williamson).  This includes
 
  - Handling the vfio type1 interface as an API rather than a specific
    implementation, allowing multiple type1 providers.
 
  - Capability chains, similar to PCI device capabilities, that allow
    extending ioctls.  Extensions here include device specific regions
    and sparse mmap descriptions.  The former is used to expose non-PCI
    regions for IGD, including the OpRegion (particularly the Video
    BIOS Table), and read only PCI config access to the host and LPC
    bridge as drivers often depend on identifying those devices.
    Sparse mmaps here are used to describe the MSIx vector table,
    which vfio has always protected from mmap, but never had an API to
    explicitly define that protection.  In future vGPU support this is
    expected to allow the description of PCI BARs that may mix direct
    access and emulated access within a single region.
 
  - The ability to expose the shadow ROM as an option ROM as IGD use
    cases may rely on the ROM even though the physical device does not
    make use of a PCI option ROM BAR.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJW6aT1AAoJECObm247sIsiiP4P/1xf7Z08/2QWVFQzex9CLcZk
 +/iJlyb/fTpPVQE+NTKPz3Qh5h6ZhSd/57s85IUqq0T6tgVPkoGx8kkyCjBaw2y1
 yMezXZlQqJdZqGzQNI4OiHWvO+/vGxYKjQMfUnMlDM6dJgz4lGncGFoSouFPa3Vp
 mB12hGxrlk1cfIdb+C1KbfZcEdS0WhtigQtz8flBKgOfO+hYWmUO+CClJBhVw8Z4
 RNcWNAxFfLuwUPVsPb6uOLG2g65SC2vmQ9k0Tnknf1znV3PFFVjITf0aM6uChLNP
 S3SgqtPX+6yOFyCuSEs8UKhhmCbeQmAyKgt5BpxV3Rw3OMP4PsVAehr82vQmSj6g
 2o96pR2s8MDPBr8eG7gdRe4DQe3PonpLkpDfaghcpYqhkGEqNVeW5/GjiOzGQqD3
 xMshzxJ1Iz7DOHkQRUVqOfupDB0TusJmTVKwvXe6yIYL9pjkUS/sbN9U563HYSES
 JTV68TMj0VKfKwD3XKYXvGH3km1sL4i5NMlAUrsDtsMkGlXEswoGbj82Mjc8+jUo
 BvWQTJb+kouJQ88VhsO2abg1UrO9E6u82iHFHy9fEObxE8KH7pvROlS93ihMT1Wv
 WQNuUcltdpHMRVX0BDknaPs3YtC3/TGgm3RcU5SZPbv/ys1471ZmJxMlAAKcfITr
 SuvkMTYElF5b1pigv46c
 =/lJn
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v4.6-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:
 "Various enablers for assignment of Intel graphics devices and future
  support of vGPU devices (Alex Williamson).  This includes

   - Handling the vfio type1 interface as an API rather than a specific
     implementation, allowing multiple type1 providers.

   - Capability chains, similar to PCI device capabilities, that allow
     extending ioctls.  Extensions here include device specific regions
     and sparse mmap descriptions.  The former is used to expose non-PCI
     regions for IGD, including the OpRegion (particularly the Video
     BIOS Table), and read only PCI config access to the host and LPC
     bridge as drivers often depend on identifying those devices.

     Sparse mmaps here are used to describe the MSIx vector table, which
     vfio has always protected from mmap, but never had an API to
     explicitly define that protection.  In future vGPU support this is
     expected to allow the description of PCI BARs that may mix direct
     access and emulated access within a single region.

   - The ability to expose the shadow ROM as an option ROM as IGD use
     cases may rely on the ROM even though the physical device does not
     make use of a PCI option ROM BAR"

* tag 'vfio-v4.6-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/pci: return -EFAULT if copy_to_user fails
  vfio/pci: Expose shadow ROM as PCI option ROM
  vfio/pci: Intel IGD host and LCP bridge config space access
  vfio/pci: Intel IGD OpRegion support
  vfio/pci: Enable virtual register in PCI config space
  vfio/pci: Add infrastructure for additional device specific regions
  vfio: Define device specific region type capability
  vfio/pci: Include sparse mmap capability for MSI-X table regions
  vfio: Define sparse mmap capability for regions
  vfio: Add capability chain helpers
  vfio: Define capability chains
  vfio: If an IOMMU backend fails, keep looking
  vfio/pci: Fix unsigned comparison overflow
2016-03-17 13:05:09 -07:00

1382 lines
34 KiB
C

/*
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Derived from original vfio:
* Copyright 2010 Cisco Systems, Inc. All rights reserved.
* Author: Tom Lyon, pugs@cisco.com
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/device.h>
#include <linux/eventfd.h>
#include <linux/file.h>
#include <linux/interrupt.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/vfio.h>
#include <linux/vgaarb.h>
#include "vfio_pci_private.h"
#define DRIVER_VERSION "0.2"
#define DRIVER_AUTHOR "Alex Williamson <alex.williamson@redhat.com>"
#define DRIVER_DESC "VFIO PCI - User Level meta-driver"
static char ids[1024] __initdata;
module_param_string(ids, ids, sizeof(ids), 0);
MODULE_PARM_DESC(ids, "Initial PCI IDs to add to the vfio driver, format is \"vendor:device[:subvendor[:subdevice[:class[:class_mask]]]]\" and multiple comma separated entries can be specified");
static bool nointxmask;
module_param_named(nointxmask, nointxmask, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(nointxmask,
"Disable support for PCI 2.3 style INTx masking. If this resolves problems for specific devices, report lspci -vvvxxx to linux-pci@vger.kernel.org so the device can be fixed automatically via the broken_intx_masking flag.");
#ifdef CONFIG_VFIO_PCI_VGA
static bool disable_vga;
module_param(disable_vga, bool, S_IRUGO);
MODULE_PARM_DESC(disable_vga, "Disable VGA resource access through vfio-pci");
#endif
static bool disable_idle_d3;
module_param(disable_idle_d3, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(disable_idle_d3,
"Disable using the PCI D3 low power state for idle, unused devices");
static DEFINE_MUTEX(driver_lock);
static inline bool vfio_vga_disabled(void)
{
#ifdef CONFIG_VFIO_PCI_VGA
return disable_vga;
#else
return true;
#endif
}
/*
* Our VGA arbiter participation is limited since we don't know anything
* about the device itself. However, if the device is the only VGA device
* downstream of a bridge and VFIO VGA support is disabled, then we can
* safely return legacy VGA IO and memory as not decoded since the user
* has no way to get to it and routing can be disabled externally at the
* bridge.
*/
static unsigned int vfio_pci_set_vga_decode(void *opaque, bool single_vga)
{
struct vfio_pci_device *vdev = opaque;
struct pci_dev *tmp = NULL, *pdev = vdev->pdev;
unsigned char max_busnr;
unsigned int decodes;
if (single_vga || !vfio_vga_disabled() || pci_is_root_bus(pdev->bus))
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM;
max_busnr = pci_bus_max_busnr(pdev->bus);
decodes = VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
while ((tmp = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, tmp)) != NULL) {
if (tmp == pdev ||
pci_domain_nr(tmp->bus) != pci_domain_nr(pdev->bus) ||
pci_is_root_bus(tmp->bus))
continue;
if (tmp->bus->number >= pdev->bus->number &&
tmp->bus->number <= max_busnr) {
pci_dev_put(tmp);
decodes |= VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM;
break;
}
}
return decodes;
}
static inline bool vfio_pci_is_vga(struct pci_dev *pdev)
{
return (pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA;
}
static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev);
static void vfio_pci_disable(struct vfio_pci_device *vdev);
static int vfio_pci_enable(struct vfio_pci_device *vdev)
{
struct pci_dev *pdev = vdev->pdev;
int ret;
u16 cmd;
u8 msix_pos;
pci_set_power_state(pdev, PCI_D0);
/* Don't allow our initial saved state to include busmaster */
pci_clear_master(pdev);
ret = pci_enable_device(pdev);
if (ret)
return ret;
vdev->reset_works = (pci_reset_function(pdev) == 0);
pci_save_state(pdev);
vdev->pci_saved_state = pci_store_saved_state(pdev);
if (!vdev->pci_saved_state)
pr_debug("%s: Couldn't store %s saved state\n",
__func__, dev_name(&pdev->dev));
ret = vfio_config_init(vdev);
if (ret) {
kfree(vdev->pci_saved_state);
vdev->pci_saved_state = NULL;
pci_disable_device(pdev);
return ret;
}
if (likely(!nointxmask))
vdev->pci_2_3 = pci_intx_mask_supported(pdev);
pci_read_config_word(pdev, PCI_COMMAND, &cmd);
if (vdev->pci_2_3 && (cmd & PCI_COMMAND_INTX_DISABLE)) {
cmd &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(pdev, PCI_COMMAND, cmd);
}
msix_pos = pdev->msix_cap;
if (msix_pos) {
u16 flags;
u32 table;
pci_read_config_word(pdev, msix_pos + PCI_MSIX_FLAGS, &flags);
pci_read_config_dword(pdev, msix_pos + PCI_MSIX_TABLE, &table);
vdev->msix_bar = table & PCI_MSIX_TABLE_BIR;
vdev->msix_offset = table & PCI_MSIX_TABLE_OFFSET;
vdev->msix_size = ((flags & PCI_MSIX_FLAGS_QSIZE) + 1) * 16;
} else
vdev->msix_bar = 0xFF;
if (!vfio_vga_disabled() && vfio_pci_is_vga(pdev))
vdev->has_vga = true;
if (vfio_pci_is_vga(pdev) &&
pdev->vendor == PCI_VENDOR_ID_INTEL &&
IS_ENABLED(CONFIG_VFIO_PCI_IGD)) {
ret = vfio_pci_igd_init(vdev);
if (ret) {
dev_warn(&vdev->pdev->dev,
"Failed to setup Intel IGD regions\n");
vfio_pci_disable(vdev);
return ret;
}
}
return 0;
}
static void vfio_pci_disable(struct vfio_pci_device *vdev)
{
struct pci_dev *pdev = vdev->pdev;
int i, bar;
/* Stop the device from further DMA */
pci_clear_master(pdev);
vfio_pci_set_irqs_ioctl(vdev, VFIO_IRQ_SET_DATA_NONE |
VFIO_IRQ_SET_ACTION_TRIGGER,
vdev->irq_type, 0, 0, NULL);
vdev->virq_disabled = false;
for (i = 0; i < vdev->num_regions; i++)
vdev->region[i].ops->release(vdev, &vdev->region[i]);
vdev->num_regions = 0;
kfree(vdev->region);
vdev->region = NULL; /* don't krealloc a freed pointer */
vfio_config_free(vdev);
for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
if (!vdev->barmap[bar])
continue;
pci_iounmap(pdev, vdev->barmap[bar]);
pci_release_selected_regions(pdev, 1 << bar);
vdev->barmap[bar] = NULL;
}
vdev->needs_reset = true;
/*
* If we have saved state, restore it. If we can reset the device,
* even better. Resetting with current state seems better than
* nothing, but saving and restoring current state without reset
* is just busy work.
*/
if (pci_load_and_free_saved_state(pdev, &vdev->pci_saved_state)) {
pr_info("%s: Couldn't reload %s saved state\n",
__func__, dev_name(&pdev->dev));
if (!vdev->reset_works)
goto out;
pci_save_state(pdev);
}
/*
* Disable INTx and MSI, presumably to avoid spurious interrupts
* during reset. Stolen from pci_reset_function()
*/
pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
/*
* Try to reset the device. The success of this is dependent on
* being able to lock the device, which is not always possible.
*/
if (vdev->reset_works && !pci_try_reset_function(pdev))
vdev->needs_reset = false;
pci_restore_state(pdev);
out:
pci_disable_device(pdev);
vfio_pci_try_bus_reset(vdev);
if (!disable_idle_d3)
pci_set_power_state(pdev, PCI_D3hot);
}
static void vfio_pci_release(void *device_data)
{
struct vfio_pci_device *vdev = device_data;
mutex_lock(&driver_lock);
if (!(--vdev->refcnt)) {
vfio_spapr_pci_eeh_release(vdev->pdev);
vfio_pci_disable(vdev);
}
mutex_unlock(&driver_lock);
module_put(THIS_MODULE);
}
static int vfio_pci_open(void *device_data)
{
struct vfio_pci_device *vdev = device_data;
int ret = 0;
if (!try_module_get(THIS_MODULE))
return -ENODEV;
mutex_lock(&driver_lock);
if (!vdev->refcnt) {
ret = vfio_pci_enable(vdev);
if (ret)
goto error;
vfio_spapr_pci_eeh_open(vdev->pdev);
}
vdev->refcnt++;
error:
mutex_unlock(&driver_lock);
if (ret)
module_put(THIS_MODULE);
return ret;
}
static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
{
if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
u8 pin;
pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
if (IS_ENABLED(CONFIG_VFIO_PCI_INTX) && pin)
return 1;
} else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) {
u8 pos;
u16 flags;
pos = vdev->pdev->msi_cap;
if (pos) {
pci_read_config_word(vdev->pdev,
pos + PCI_MSI_FLAGS, &flags);
return 1 << ((flags & PCI_MSI_FLAGS_QMASK) >> 1);
}
} else if (irq_type == VFIO_PCI_MSIX_IRQ_INDEX) {
u8 pos;
u16 flags;
pos = vdev->pdev->msix_cap;
if (pos) {
pci_read_config_word(vdev->pdev,
pos + PCI_MSIX_FLAGS, &flags);
return (flags & PCI_MSIX_FLAGS_QSIZE) + 1;
}
} else if (irq_type == VFIO_PCI_ERR_IRQ_INDEX) {
if (pci_is_pcie(vdev->pdev))
return 1;
} else if (irq_type == VFIO_PCI_REQ_IRQ_INDEX) {
return 1;
}
return 0;
}
static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
{
(*(int *)data)++;
return 0;
}
struct vfio_pci_fill_info {
int max;
int cur;
struct vfio_pci_dependent_device *devices;
};
static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
{
struct vfio_pci_fill_info *fill = data;
struct iommu_group *iommu_group;
if (fill->cur == fill->max)
return -EAGAIN; /* Something changed, try again */
iommu_group = iommu_group_get(&pdev->dev);
if (!iommu_group)
return -EPERM; /* Cannot reset non-isolated devices */
fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
fill->devices[fill->cur].segment = pci_domain_nr(pdev->bus);
fill->devices[fill->cur].bus = pdev->bus->number;
fill->devices[fill->cur].devfn = pdev->devfn;
fill->cur++;
iommu_group_put(iommu_group);
return 0;
}
struct vfio_pci_group_entry {
struct vfio_group *group;
int id;
};
struct vfio_pci_group_info {
int count;
struct vfio_pci_group_entry *groups;
};
static int vfio_pci_validate_devs(struct pci_dev *pdev, void *data)
{
struct vfio_pci_group_info *info = data;
struct iommu_group *group;
int id, i;
group = iommu_group_get(&pdev->dev);
if (!group)
return -EPERM;
id = iommu_group_id(group);
for (i = 0; i < info->count; i++)
if (info->groups[i].id == id)
break;
iommu_group_put(group);
return (i == info->count) ? -EINVAL : 0;
}
static bool vfio_pci_dev_below_slot(struct pci_dev *pdev, struct pci_slot *slot)
{
for (; pdev; pdev = pdev->bus->self)
if (pdev->bus == slot->bus)
return (pdev->slot == slot);
return false;
}
struct vfio_pci_walk_info {
int (*fn)(struct pci_dev *, void *data);
void *data;
struct pci_dev *pdev;
bool slot;
int ret;
};
static int vfio_pci_walk_wrapper(struct pci_dev *pdev, void *data)
{
struct vfio_pci_walk_info *walk = data;
if (!walk->slot || vfio_pci_dev_below_slot(pdev, walk->pdev->slot))
walk->ret = walk->fn(pdev, walk->data);
return walk->ret;
}
static int vfio_pci_for_each_slot_or_bus(struct pci_dev *pdev,
int (*fn)(struct pci_dev *,
void *data), void *data,
bool slot)
{
struct vfio_pci_walk_info walk = {
.fn = fn, .data = data, .pdev = pdev, .slot = slot, .ret = 0,
};
pci_walk_bus(pdev->bus, vfio_pci_walk_wrapper, &walk);
return walk.ret;
}
static int msix_sparse_mmap_cap(struct vfio_pci_device *vdev,
struct vfio_info_cap *caps)
{
struct vfio_info_cap_header *header;
struct vfio_region_info_cap_sparse_mmap *sparse;
size_t end, size;
int nr_areas = 2, i = 0;
end = pci_resource_len(vdev->pdev, vdev->msix_bar);
/* If MSI-X table is aligned to the start or end, only one area */
if (((vdev->msix_offset & PAGE_MASK) == 0) ||
(PAGE_ALIGN(vdev->msix_offset + vdev->msix_size) >= end))
nr_areas = 1;
size = sizeof(*sparse) + (nr_areas * sizeof(*sparse->areas));
header = vfio_info_cap_add(caps, size,
VFIO_REGION_INFO_CAP_SPARSE_MMAP, 1);
if (IS_ERR(header))
return PTR_ERR(header);
sparse = container_of(header,
struct vfio_region_info_cap_sparse_mmap, header);
sparse->nr_areas = nr_areas;
if (vdev->msix_offset & PAGE_MASK) {
sparse->areas[i].offset = 0;
sparse->areas[i].size = vdev->msix_offset & PAGE_MASK;
i++;
}
if (PAGE_ALIGN(vdev->msix_offset + vdev->msix_size) < end) {
sparse->areas[i].offset = PAGE_ALIGN(vdev->msix_offset +
vdev->msix_size);
sparse->areas[i].size = end - sparse->areas[i].offset;
i++;
}
return 0;
}
static int region_type_cap(struct vfio_pci_device *vdev,
struct vfio_info_cap *caps,
unsigned int type, unsigned int subtype)
{
struct vfio_info_cap_header *header;
struct vfio_region_info_cap_type *cap;
header = vfio_info_cap_add(caps, sizeof(*cap),
VFIO_REGION_INFO_CAP_TYPE, 1);
if (IS_ERR(header))
return PTR_ERR(header);
cap = container_of(header, struct vfio_region_info_cap_type, header);
cap->type = type;
cap->subtype = subtype;
return 0;
}
int vfio_pci_register_dev_region(struct vfio_pci_device *vdev,
unsigned int type, unsigned int subtype,
const struct vfio_pci_regops *ops,
size_t size, u32 flags, void *data)
{
struct vfio_pci_region *region;
region = krealloc(vdev->region,
(vdev->num_regions + 1) * sizeof(*region),
GFP_KERNEL);
if (!region)
return -ENOMEM;
vdev->region = region;
vdev->region[vdev->num_regions].type = type;
vdev->region[vdev->num_regions].subtype = subtype;
vdev->region[vdev->num_regions].ops = ops;
vdev->region[vdev->num_regions].size = size;
vdev->region[vdev->num_regions].flags = flags;
vdev->region[vdev->num_regions].data = data;
vdev->num_regions++;
return 0;
}
static long vfio_pci_ioctl(void *device_data,
unsigned int cmd, unsigned long arg)
{
struct vfio_pci_device *vdev = device_data;
unsigned long minsz;
if (cmd == VFIO_DEVICE_GET_INFO) {
struct vfio_device_info info;
minsz = offsetofend(struct vfio_device_info, num_irqs);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.flags = VFIO_DEVICE_FLAGS_PCI;
if (vdev->reset_works)
info.flags |= VFIO_DEVICE_FLAGS_RESET;
info.num_regions = VFIO_PCI_NUM_REGIONS + vdev->num_regions;
info.num_irqs = VFIO_PCI_NUM_IRQS;
return copy_to_user((void __user *)arg, &info, minsz) ?
-EFAULT : 0;
} else if (cmd == VFIO_DEVICE_GET_REGION_INFO) {
struct pci_dev *pdev = vdev->pdev;
struct vfio_region_info info;
struct vfio_info_cap caps = { .buf = NULL, .size = 0 };
int i, ret;
minsz = offsetofend(struct vfio_region_info, offset);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
switch (info.index) {
case VFIO_PCI_CONFIG_REGION_INDEX:
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = pdev->cfg_size;
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
break;
case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = pci_resource_len(pdev, info.index);
if (!info.size) {
info.flags = 0;
break;
}
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
if (IS_ENABLED(CONFIG_VFIO_PCI_MMAP) &&
pci_resource_flags(pdev, info.index) &
IORESOURCE_MEM && info.size >= PAGE_SIZE) {
info.flags |= VFIO_REGION_INFO_FLAG_MMAP;
if (info.index == vdev->msix_bar) {
ret = msix_sparse_mmap_cap(vdev, &caps);
if (ret)
return ret;
}
}
break;
case VFIO_PCI_ROM_REGION_INDEX:
{
void __iomem *io;
size_t size;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.flags = 0;
/* Report the BAR size, not the ROM size */
info.size = pci_resource_len(pdev, info.index);
if (!info.size) {
/* Shadow ROMs appear as PCI option ROMs */
if (pdev->resource[PCI_ROM_RESOURCE].flags &
IORESOURCE_ROM_SHADOW)
info.size = 0x20000;
else
break;
}
/* Is it really there? */
io = pci_map_rom(pdev, &size);
if (!io || !size) {
info.size = 0;
break;
}
pci_unmap_rom(pdev, io);
info.flags = VFIO_REGION_INFO_FLAG_READ;
break;
}
case VFIO_PCI_VGA_REGION_INDEX:
if (!vdev->has_vga)
return -EINVAL;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = 0xc0000;
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
break;
default:
if (info.index >=
VFIO_PCI_NUM_REGIONS + vdev->num_regions)
return -EINVAL;
i = info.index - VFIO_PCI_NUM_REGIONS;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = vdev->region[i].size;
info.flags = vdev->region[i].flags;
ret = region_type_cap(vdev, &caps,
vdev->region[i].type,
vdev->region[i].subtype);
if (ret)
return ret;
}
if (caps.size) {
info.flags |= VFIO_REGION_INFO_FLAG_CAPS;
if (info.argsz < sizeof(info) + caps.size) {
info.argsz = sizeof(info) + caps.size;
info.cap_offset = 0;
} else {
vfio_info_cap_shift(&caps, sizeof(info));
if (copy_to_user((void __user *)arg +
sizeof(info), caps.buf,
caps.size)) {
kfree(caps.buf);
return -EFAULT;
}
info.cap_offset = sizeof(info);
}
kfree(caps.buf);
}
return copy_to_user((void __user *)arg, &info, minsz) ?
-EFAULT : 0;
} else if (cmd == VFIO_DEVICE_GET_IRQ_INFO) {
struct vfio_irq_info info;
minsz = offsetofend(struct vfio_irq_info, count);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz || info.index >= VFIO_PCI_NUM_IRQS)
return -EINVAL;
switch (info.index) {
case VFIO_PCI_INTX_IRQ_INDEX ... VFIO_PCI_MSIX_IRQ_INDEX:
case VFIO_PCI_REQ_IRQ_INDEX:
break;
case VFIO_PCI_ERR_IRQ_INDEX:
if (pci_is_pcie(vdev->pdev))
break;
/* pass thru to return error */
default:
return -EINVAL;
}
info.flags = VFIO_IRQ_INFO_EVENTFD;
info.count = vfio_pci_get_irq_count(vdev, info.index);
if (info.index == VFIO_PCI_INTX_IRQ_INDEX)
info.flags |= (VFIO_IRQ_INFO_MASKABLE |
VFIO_IRQ_INFO_AUTOMASKED);
else
info.flags |= VFIO_IRQ_INFO_NORESIZE;
return copy_to_user((void __user *)arg, &info, minsz) ?
-EFAULT : 0;
} else if (cmd == VFIO_DEVICE_SET_IRQS) {
struct vfio_irq_set hdr;
u8 *data = NULL;
int ret = 0;
minsz = offsetofend(struct vfio_irq_set, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz || hdr.index >= VFIO_PCI_NUM_IRQS ||
hdr.flags & ~(VFIO_IRQ_SET_DATA_TYPE_MASK |
VFIO_IRQ_SET_ACTION_TYPE_MASK))
return -EINVAL;
if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) {
size_t size;
int max = vfio_pci_get_irq_count(vdev, hdr.index);
if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL)
size = sizeof(uint8_t);
else if (hdr.flags & VFIO_IRQ_SET_DATA_EVENTFD)
size = sizeof(int32_t);
else
return -EINVAL;
if (hdr.argsz - minsz < hdr.count * size ||
hdr.start >= max || hdr.start + hdr.count > max)
return -EINVAL;
data = memdup_user((void __user *)(arg + minsz),
hdr.count * size);
if (IS_ERR(data))
return PTR_ERR(data);
}
mutex_lock(&vdev->igate);
ret = vfio_pci_set_irqs_ioctl(vdev, hdr.flags, hdr.index,
hdr.start, hdr.count, data);
mutex_unlock(&vdev->igate);
kfree(data);
return ret;
} else if (cmd == VFIO_DEVICE_RESET) {
return vdev->reset_works ?
pci_try_reset_function(vdev->pdev) : -EINVAL;
} else if (cmd == VFIO_DEVICE_GET_PCI_HOT_RESET_INFO) {
struct vfio_pci_hot_reset_info hdr;
struct vfio_pci_fill_info fill = { 0 };
struct vfio_pci_dependent_device *devices = NULL;
bool slot = false;
int ret = 0;
minsz = offsetofend(struct vfio_pci_hot_reset_info, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz)
return -EINVAL;
hdr.flags = 0;
/* Can we do a slot or bus reset or neither? */
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return -ENODEV;
/* How many devices are affected? */
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_count_devs,
&fill.max, slot);
if (ret)
return ret;
WARN_ON(!fill.max); /* Should always be at least one */
/*
* If there's enough space, fill it now, otherwise return
* -ENOSPC and the number of devices affected.
*/
if (hdr.argsz < sizeof(hdr) + (fill.max * sizeof(*devices))) {
ret = -ENOSPC;
hdr.count = fill.max;
goto reset_info_exit;
}
devices = kcalloc(fill.max, sizeof(*devices), GFP_KERNEL);
if (!devices)
return -ENOMEM;
fill.devices = devices;
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_fill_devs,
&fill, slot);
/*
* If a device was removed between counting and filling,
* we may come up short of fill.max. If a device was
* added, we'll have a return of -EAGAIN above.
*/
if (!ret)
hdr.count = fill.cur;
reset_info_exit:
if (copy_to_user((void __user *)arg, &hdr, minsz))
ret = -EFAULT;
if (!ret) {
if (copy_to_user((void __user *)(arg + minsz), devices,
hdr.count * sizeof(*devices)))
ret = -EFAULT;
}
kfree(devices);
return ret;
} else if (cmd == VFIO_DEVICE_PCI_HOT_RESET) {
struct vfio_pci_hot_reset hdr;
int32_t *group_fds;
struct vfio_pci_group_entry *groups;
struct vfio_pci_group_info info;
bool slot = false;
int i, count = 0, ret = 0;
minsz = offsetofend(struct vfio_pci_hot_reset, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
if (hdr.argsz < minsz || hdr.flags)
return -EINVAL;
/* Can we do a slot or bus reset or neither? */
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return -ENODEV;
/*
* We can't let userspace give us an arbitrarily large
* buffer to copy, so verify how many we think there
* could be. Note groups can have multiple devices so
* one group per device is the max.
*/
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_count_devs,
&count, slot);
if (ret)
return ret;
/* Somewhere between 1 and count is OK */
if (!hdr.count || hdr.count > count)
return -EINVAL;
group_fds = kcalloc(hdr.count, sizeof(*group_fds), GFP_KERNEL);
groups = kcalloc(hdr.count, sizeof(*groups), GFP_KERNEL);
if (!group_fds || !groups) {
kfree(group_fds);
kfree(groups);
return -ENOMEM;
}
if (copy_from_user(group_fds, (void __user *)(arg + minsz),
hdr.count * sizeof(*group_fds))) {
kfree(group_fds);
kfree(groups);
return -EFAULT;
}
/*
* For each group_fd, get the group through the vfio external
* user interface and store the group and iommu ID. This
* ensures the group is held across the reset.
*/
for (i = 0; i < hdr.count; i++) {
struct vfio_group *group;
struct fd f = fdget(group_fds[i]);
if (!f.file) {
ret = -EBADF;
break;
}
group = vfio_group_get_external_user(f.file);
fdput(f);
if (IS_ERR(group)) {
ret = PTR_ERR(group);
break;
}
groups[i].group = group;
groups[i].id = vfio_external_user_iommu_id(group);
}
kfree(group_fds);
/* release reference to groups on error */
if (ret)
goto hot_reset_release;
info.count = hdr.count;
info.groups = groups;
/*
* Test whether all the affected devices are contained
* by the set of groups provided by the user.
*/
ret = vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_validate_devs,
&info, slot);
if (!ret)
/* User has access, do the reset */
ret = slot ? pci_try_reset_slot(vdev->pdev->slot) :
pci_try_reset_bus(vdev->pdev->bus);
hot_reset_release:
for (i--; i >= 0; i--)
vfio_group_put_external_user(groups[i].group);
kfree(groups);
return ret;
}
return -ENOTTY;
}
static ssize_t vfio_pci_rw(void *device_data, char __user *buf,
size_t count, loff_t *ppos, bool iswrite)
{
unsigned int index = VFIO_PCI_OFFSET_TO_INDEX(*ppos);
struct vfio_pci_device *vdev = device_data;
if (index >= VFIO_PCI_NUM_REGIONS + vdev->num_regions)
return -EINVAL;
switch (index) {
case VFIO_PCI_CONFIG_REGION_INDEX:
return vfio_pci_config_rw(vdev, buf, count, ppos, iswrite);
case VFIO_PCI_ROM_REGION_INDEX:
if (iswrite)
return -EINVAL;
return vfio_pci_bar_rw(vdev, buf, count, ppos, false);
case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
return vfio_pci_bar_rw(vdev, buf, count, ppos, iswrite);
case VFIO_PCI_VGA_REGION_INDEX:
return vfio_pci_vga_rw(vdev, buf, count, ppos, iswrite);
default:
index -= VFIO_PCI_NUM_REGIONS;
return vdev->region[index].ops->rw(vdev, buf,
count, ppos, iswrite);
}
return -EINVAL;
}
static ssize_t vfio_pci_read(void *device_data, char __user *buf,
size_t count, loff_t *ppos)
{
if (!count)
return 0;
return vfio_pci_rw(device_data, buf, count, ppos, false);
}
static ssize_t vfio_pci_write(void *device_data, const char __user *buf,
size_t count, loff_t *ppos)
{
if (!count)
return 0;
return vfio_pci_rw(device_data, (char __user *)buf, count, ppos, true);
}
static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma)
{
struct vfio_pci_device *vdev = device_data;
struct pci_dev *pdev = vdev->pdev;
unsigned int index;
u64 phys_len, req_len, pgoff, req_start;
int ret;
index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
if (vma->vm_end < vma->vm_start)
return -EINVAL;
if ((vma->vm_flags & VM_SHARED) == 0)
return -EINVAL;
if (index >= VFIO_PCI_ROM_REGION_INDEX)
return -EINVAL;
if (!(pci_resource_flags(pdev, index) & IORESOURCE_MEM))
return -EINVAL;
phys_len = pci_resource_len(pdev, index);
req_len = vma->vm_end - vma->vm_start;
pgoff = vma->vm_pgoff &
((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
req_start = pgoff << PAGE_SHIFT;
if (phys_len < PAGE_SIZE || req_start + req_len > phys_len)
return -EINVAL;
if (index == vdev->msix_bar) {
/*
* Disallow mmaps overlapping the MSI-X table; users don't
* get to touch this directly. We could find somewhere
* else to map the overlap, but page granularity is only
* a recommendation, not a requirement, so the user needs
* to know which bits are real. Requiring them to mmap
* around the table makes that clear.
*/
/* If neither entirely above nor below, then it overlaps */
if (!(req_start >= vdev->msix_offset + vdev->msix_size ||
req_start + req_len <= vdev->msix_offset))
return -EINVAL;
}
/*
* Even though we don't make use of the barmap for the mmap,
* we need to request the region and the barmap tracks that.
*/
if (!vdev->barmap[index]) {
ret = pci_request_selected_regions(pdev,
1 << index, "vfio-pci");
if (ret)
return ret;
vdev->barmap[index] = pci_iomap(pdev, index, 0);
}
vma->vm_private_data = vdev;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
vma->vm_pgoff = (pci_resource_start(pdev, index) >> PAGE_SHIFT) + pgoff;
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
req_len, vma->vm_page_prot);
}
static void vfio_pci_request(void *device_data, unsigned int count)
{
struct vfio_pci_device *vdev = device_data;
mutex_lock(&vdev->igate);
if (vdev->req_trigger) {
if (!(count % 10))
dev_notice_ratelimited(&vdev->pdev->dev,
"Relaying device request to user (#%u)\n",
count);
eventfd_signal(vdev->req_trigger, 1);
} else if (count == 0) {
dev_warn(&vdev->pdev->dev,
"No device request channel registered, blocked until released by user\n");
}
mutex_unlock(&vdev->igate);
}
static const struct vfio_device_ops vfio_pci_ops = {
.name = "vfio-pci",
.open = vfio_pci_open,
.release = vfio_pci_release,
.ioctl = vfio_pci_ioctl,
.read = vfio_pci_read,
.write = vfio_pci_write,
.mmap = vfio_pci_mmap,
.request = vfio_pci_request,
};
static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct vfio_pci_device *vdev;
struct iommu_group *group;
int ret;
if (pdev->hdr_type != PCI_HEADER_TYPE_NORMAL)
return -EINVAL;
group = vfio_iommu_group_get(&pdev->dev);
if (!group)
return -EINVAL;
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
vfio_iommu_group_put(group, &pdev->dev);
return -ENOMEM;
}
vdev->pdev = pdev;
vdev->irq_type = VFIO_PCI_NUM_IRQS;
mutex_init(&vdev->igate);
spin_lock_init(&vdev->irqlock);
ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
if (ret) {
vfio_iommu_group_put(group, &pdev->dev);
kfree(vdev);
return ret;
}
if (vfio_pci_is_vga(pdev)) {
vga_client_register(pdev, vdev, NULL, vfio_pci_set_vga_decode);
vga_set_legacy_decoding(pdev,
vfio_pci_set_vga_decode(vdev, false));
}
if (!disable_idle_d3) {
/*
* pci-core sets the device power state to an unknown value at
* bootup and after being removed from a driver. The only
* transition it allows from this unknown state is to D0, which
* typically happens when a driver calls pci_enable_device().
* We're not ready to enable the device yet, but we do want to
* be able to get to D3. Therefore first do a D0 transition
* before going to D3.
*/
pci_set_power_state(pdev, PCI_D0);
pci_set_power_state(pdev, PCI_D3hot);
}
return ret;
}
static void vfio_pci_remove(struct pci_dev *pdev)
{
struct vfio_pci_device *vdev;
vdev = vfio_del_group_dev(&pdev->dev);
if (!vdev)
return;
vfio_iommu_group_put(pdev->dev.iommu_group, &pdev->dev);
kfree(vdev->region);
kfree(vdev);
if (vfio_pci_is_vga(pdev)) {
vga_client_register(pdev, NULL, NULL, NULL);
vga_set_legacy_decoding(pdev,
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM);
}
if (!disable_idle_d3)
pci_set_power_state(pdev, PCI_D0);
}
static pci_ers_result_t vfio_pci_aer_err_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct vfio_pci_device *vdev;
struct vfio_device *device;
device = vfio_device_get_from_dev(&pdev->dev);
if (device == NULL)
return PCI_ERS_RESULT_DISCONNECT;
vdev = vfio_device_data(device);
if (vdev == NULL) {
vfio_device_put(device);
return PCI_ERS_RESULT_DISCONNECT;
}
mutex_lock(&vdev->igate);
if (vdev->err_trigger)
eventfd_signal(vdev->err_trigger, 1);
mutex_unlock(&vdev->igate);
vfio_device_put(device);
return PCI_ERS_RESULT_CAN_RECOVER;
}
static const struct pci_error_handlers vfio_err_handlers = {
.error_detected = vfio_pci_aer_err_detected,
};
static struct pci_driver vfio_pci_driver = {
.name = "vfio-pci",
.id_table = NULL, /* only dynamic ids */
.probe = vfio_pci_probe,
.remove = vfio_pci_remove,
.err_handler = &vfio_err_handlers,
};
struct vfio_devices {
struct vfio_device **devices;
int cur_index;
int max_index;
};
static int vfio_pci_get_devs(struct pci_dev *pdev, void *data)
{
struct vfio_devices *devs = data;
struct vfio_device *device;
if (devs->cur_index == devs->max_index)
return -ENOSPC;
device = vfio_device_get_from_dev(&pdev->dev);
if (!device)
return -EINVAL;
if (pci_dev_driver(pdev) != &vfio_pci_driver) {
vfio_device_put(device);
return -EBUSY;
}
devs->devices[devs->cur_index++] = device;
return 0;
}
/*
* Attempt to do a bus/slot reset if there are devices affected by a reset for
* this device that are needs_reset and all of the affected devices are unused
* (!refcnt). Callers are required to hold driver_lock when calling this to
* prevent device opens and concurrent bus reset attempts. We prevent device
* unbinds by acquiring and holding a reference to the vfio_device.
*
* NB: vfio-core considers a group to be viable even if some devices are
* bound to drivers like pci-stub or pcieport. Here we require all devices
* to be bound to vfio_pci since that's the only way we can be sure they
* stay put.
*/
static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev)
{
struct vfio_devices devs = { .cur_index = 0 };
int i = 0, ret = -EINVAL;
bool needs_reset = false, slot = false;
struct vfio_pci_device *tmp;
if (!pci_probe_reset_slot(vdev->pdev->slot))
slot = true;
else if (pci_probe_reset_bus(vdev->pdev->bus))
return;
if (vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_count_devs,
&i, slot) || !i)
return;
devs.max_index = i;
devs.devices = kcalloc(i, sizeof(struct vfio_device *), GFP_KERNEL);
if (!devs.devices)
return;
if (vfio_pci_for_each_slot_or_bus(vdev->pdev,
vfio_pci_get_devs, &devs, slot))
goto put_devs;
for (i = 0; i < devs.cur_index; i++) {
tmp = vfio_device_data(devs.devices[i]);
if (tmp->needs_reset)
needs_reset = true;
if (tmp->refcnt)
goto put_devs;
}
if (needs_reset)
ret = slot ? pci_try_reset_slot(vdev->pdev->slot) :
pci_try_reset_bus(vdev->pdev->bus);
put_devs:
for (i = 0; i < devs.cur_index; i++) {
tmp = vfio_device_data(devs.devices[i]);
if (!ret)
tmp->needs_reset = false;
if (!tmp->refcnt && !disable_idle_d3)
pci_set_power_state(tmp->pdev, PCI_D3hot);
vfio_device_put(devs.devices[i]);
}
kfree(devs.devices);
}
static void __exit vfio_pci_cleanup(void)
{
pci_unregister_driver(&vfio_pci_driver);
vfio_pci_uninit_perm_bits();
}
static void __init vfio_pci_fill_ids(void)
{
char *p, *id;
int rc;
/* no ids passed actually */
if (ids[0] == '\0')
return;
/* add ids specified in the module parameter */
p = ids;
while ((id = strsep(&p, ","))) {
unsigned int vendor, device, subvendor = PCI_ANY_ID,
subdevice = PCI_ANY_ID, class = 0, class_mask = 0;
int fields;
if (!strlen(id))
continue;
fields = sscanf(id, "%x:%x:%x:%x:%x:%x",
&vendor, &device, &subvendor, &subdevice,
&class, &class_mask);
if (fields < 2) {
pr_warn("invalid id string \"%s\"\n", id);
continue;
}
rc = pci_add_dynid(&vfio_pci_driver, vendor, device,
subvendor, subdevice, class, class_mask, 0);
if (rc)
pr_warn("failed to add dynamic id [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x (%d)\n",
vendor, device, subvendor, subdevice,
class, class_mask, rc);
else
pr_info("add [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x\n",
vendor, device, subvendor, subdevice,
class, class_mask);
}
}
static int __init vfio_pci_init(void)
{
int ret;
/* Allocate shared config space permision data used by all devices */
ret = vfio_pci_init_perm_bits();
if (ret)
return ret;
/* Register and scan for devices */
ret = pci_register_driver(&vfio_pci_driver);
if (ret)
goto out_driver;
vfio_pci_fill_ids();
return 0;
out_driver:
vfio_pci_uninit_perm_bits();
return ret;
}
module_init(vfio_pci_init);
module_exit(vfio_pci_cleanup);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);