linux/arch/arm/mach-pxa/Kconfig
Robert Jarzmik 3ad32229be ARM: pxa: arbitrarily set first interrupt number
As IRQ0, the legacy timer interrupt  should not be used as an interrupt
number, shift the interrupts by a fixed number.

As we had in a special case a shift of 16 when ISA bus was used on a
PXA, use that value as the first interrupt number, regardless of ISA or
not.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2014-12-26 18:03:20 +01:00

695 lines
14 KiB
Plaintext

if ARCH_PXA
menu "Intel PXA2xx/PXA3xx Implementations"
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config MACH_PXA27X_DT
bool "Support PXA27x platforms from device tree"
select POWER_SUPPLY
select PXA27x
select USE_OF
help
Include support for Marvell PXA27x based platforms using
the device tree. Needn't select any other machine while
MACH_PXA27X_DT is enabled.
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
select USE_OF
help
Include support for Marvell PXA3xx based platforms using
the device tree. Needn't select any other machine while
MACH_PXA3XX_DT is enabled.
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x
select SA1111
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select PXA27x
config MACH_ZYLONITE
bool
select PXA3xx
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select CPU_PXA300
select CPU_PXA310
select MACH_ZYLONITE
config MACH_ZYLONITE320
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
select CPU_PXA320
select MACH_ZYLONITE
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select CPU_PXA930
select CPU_PXA935
select PXA3xx
select FB
select FB_PXA
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select CPU_PXA930
select CPU_PXA935
select PXA3xx
select FB
select FB_PXA
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select ARCOM_PCMCIA
select I2C_GPIO if I2C=y
select ISA
select PXA25x
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
select ARCOM_PCMCIA
select ISA
select PXA27x
config MACH_BALLOON3
bool "Balloon 3 board"
select IWMMXT
select PXA27x
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select IWMMXT
select PXA27x
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config CSB726_CSB701
bool "Enable support for CSB701 baseboard"
depends on MACH_CSB726
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select IWMMXT
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
select CPU_PXA320
select PXA3xx
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
select PXA25x
help
Say Y here if you intend to run this kernel on
Basix, Connex, ws-200ax, ws-400ax systems
choice
prompt "Gumstix Carrier/Expansion Board"
depends on ARCH_GUMSTIX
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
config GUMSTIX_AM300EPD
bool "Enable AM300EPD board support"
endchoice
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
select IWMMXT
select PXA27x
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select IWMMXT
select PXA27x
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select MTD
select MTD_CFI
select MTD_CFI_INTELEXT
select MTD_PHYSMAP
select PXA25x
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
select PXA27x
select TRIZEPS_PCMCIA
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select MACH_TRIZEPS4
select PXA27x
select TRIZEPS_PCMCIA
choice
prompt "Select base board for Trizeps module"
depends on TRIZEPS_PXA
config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
config MACH_TRIZEPS_UCONXS
bool "uConXS Eval Board"
config MACH_TRIZEPS_ANY
bool "another Board"
endchoice
config ARCOM_PCMCIA
bool
help
Generic option for Arcom Viper/Zeus PCMCIA
config TRIZEPS_PCMCIA
bool
help
Enable PCMCIA support for Trizeps modules
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select IWMMXT
select PXA27x
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
depends on MACH_PCM027
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
config PCM990_DISPLAY_NONE
bool "no display"
endchoice
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
select PXA27x
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select CPU_PXA320
select PXA3xx
config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
config MACH_VPAC270
bool "Voipac PXA270"
select HAVE_PATA_PLATFORM
select PXA27x
help
PXA270 based Single Board Computer.
comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
select IWMMXT
select PXA27x
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select IWMMXT
select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select GPIO_SYSFS
select IWMMXT
select PXA27x
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
config PXA_EZX
bool "Motorola EZX Platform"
select IWMMXT
select PXA27x
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
config MACH_PALM27X
bool
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
config MACH_PALMTC
bool "Palm Tungsten|C"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|C
handheld computer.
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
config PALM_TREO
bool
depends on ARCH_PXA_PALM
config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PALM_TREO
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select IWMMXT
select MACH_PALM27X
select PALM_TREO
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_PARAM
select SHARP_SCOOP
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config PXA_SHARPSL_DETECT_MACH_ID
bool "Detect machine ID at run-time in the decompressor"
depends on PXA_SHARPSL
help
Say Y here if you want the zImage decompressor to detect
the Zaurus machine ID at run-time. For latest kexec-based
boot loader, this is not necessary.
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
select SHARP_LOCOMO
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
select I2C
select I2C_PXA
select MACH_SPITZ
select PXA27x
select PXA_SHARP_Cxx00
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
config TOSA_USE_EXT_KEYCODES
bool "Tosa keyboard: use extended keycodes"
depends on MACH_TOSA
default n
help
Say Y here to enable the tosa keyboard driver to generate extended
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
by either console keyboard driver or by Kdrive keybd driver.
Say Y only if you know, what you are doing!
config MACH_ICONTROL
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
select CPU_PXA320
select PXA3xx
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select FB_W100
select PXA25x
config MACH_E330
bool "Toshiba e330"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config MACH_E350
bool "Toshiba e350"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_E750
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_E400
bool "Toshiba e400"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
select PXA27x
endmenu
config PXA25x
bool
select CPU_XSCALE
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
select CPU_XSCALE
help
Select code specific to PXA27x variants
config CPU_PXA26x
bool
select PXA25x
help
Select code specific to PXA26x (codename Dalhart)
config PXA3xx
bool
select CPU_XSC3
help
Select code specific to PXA3xx variants
config CPU_PXA300
bool
select PXA3xx
help
PXA300 (codename Monahans-L)
config CPU_PXA310
bool
select CPU_PXA300
select PXA310_ULPI if USB_ULPI
help
PXA310 (codename Monahans-LV)
config CPU_PXA320
bool
select PXA3xx
help
PXA320 (codename Monahans-P)
config CPU_PXA930
bool
select PXA3xx
help
PXA930 (codename Tavor-P)
config CPU_PXA935
bool
select CPU_PXA930
help
PXA935 (codename Tavor-P65)
config PXA_SHARP_C7xx
bool
select SHARPSL_PM
help
Enable support for all Sharp C7xx models
config PXA_SHARP_Cxx00
bool
select SHARPSL_PM
help
Enable common support for Sharp Cxx00 models
config SHARPSL_PM
bool
select APM_EMULATION
select SHARPSL_PM_MAX1111
config SHARPSL_PM_MAX1111
bool
select HWMON
select SENSORS_MAX1111
select SPI
select SPI_MASTER
config PXA310_ULPI
bool
endif