linux/drivers/usb/host/ehci-s5p.c
Linus Torvalds 9cd11c0c47 ARM: soc: multiplatform enablement
This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
2012-10-01 19:11:38 -07:00

288 lines
6.8 KiB
C

/*
* SAMSUNG S5P USB HOST EHCI Controller
*
* Copyright (C) 2011 Samsung Electronics Co.Ltd
* Author: Jingoo Han <jg1.han@samsung.com>
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/usb-phy.h>
#define EHCI_INSNREG00(base) (base + 0x90)
#define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25)
#define EHCI_INSNREG00_ENA_INCR8 (0x1 << 24)
#define EHCI_INSNREG00_ENA_INCR4 (0x1 << 23)
#define EHCI_INSNREG00_ENA_INCRX_ALIGN (0x1 << 22)
#define EHCI_INSNREG00_ENABLE_DMA_BURST \
(EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
struct s5p_ehci_hcd {
struct device *dev;
struct usb_hcd *hcd;
struct clk *clk;
};
static const struct hc_driver s5p_ehci_hc_driver = {
.description = hcd_name,
.product_desc = "S5P EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
.reset = ehci_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
.get_frame_number = ehci_get_frame,
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static void s5p_setup_vbus_gpio(struct platform_device *pdev)
{
int err;
int gpio;
if (!pdev->dev.of_node)
return;
gpio = of_get_named_gpio(pdev->dev.of_node,
"samsung,vbus-gpio", 0);
if (!gpio_is_valid(gpio))
return;
err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio");
if (err)
dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio);
}
static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
static int __devinit s5p_ehci_probe(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata;
struct s5p_ehci_hcd *s5p_ehci;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct resource *res;
int irq;
int err;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "No platform data defined\n");
return -EINVAL;
}
/*
* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &ehci_s5p_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
s5p_setup_vbus_gpio(pdev);
s5p_ehci = devm_kzalloc(&pdev->dev, sizeof(struct s5p_ehci_hcd),
GFP_KERNEL);
if (!s5p_ehci)
return -ENOMEM;
s5p_ehci->dev = &pdev->dev;
hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
return -ENOMEM;
}
s5p_ehci->hcd = hcd;
s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost");
if (IS_ERR(s5p_ehci->clk)) {
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
err = PTR_ERR(s5p_ehci->clk);
goto fail_clk;
}
err = clk_enable(s5p_ehci->clk);
if (err)
goto fail_clk;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get I/O memory\n");
err = -ENXIO;
goto fail_io;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "Failed to remap I/O memory\n");
err = -ENOMEM;
goto fail_io;
}
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "Failed to get IRQ\n");
err = -ENODEV;
goto fail_io;
}
if (pdata->phy_init)
pdata->phy_init(pdev, S5P_USB_PHY_HOST);
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
/* DMA burst Enable */
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");
goto fail_io;
}
platform_set_drvdata(pdev, s5p_ehci);
return 0;
fail_io:
clk_disable(s5p_ehci->clk);
fail_clk:
usb_put_hcd(hcd);
return err;
}
static int __devexit s5p_ehci_remove(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = s5p_ehci->hcd;
usb_remove_hcd(hcd);
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
clk_disable(s5p_ehci->clk);
usb_put_hcd(hcd);
return 0;
}
static void s5p_ehci_shutdown(struct platform_device *pdev)
{
struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = s5p_ehci->hcd;
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
#ifdef CONFIG_PM
static int s5p_ehci_suspend(struct device *dev)
{
struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
struct usb_hcd *hcd = s5p_ehci->hcd;
bool do_wakeup = device_may_wakeup(dev);
struct platform_device *pdev = to_platform_device(dev);
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
int rc;
rc = ehci_suspend(hcd, do_wakeup);
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
clk_disable(s5p_ehci->clk);
return rc;
}
static int s5p_ehci_resume(struct device *dev)
{
struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
struct usb_hcd *hcd = s5p_ehci->hcd;
struct platform_device *pdev = to_platform_device(dev);
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
clk_enable(s5p_ehci->clk);
if (pdata && pdata->phy_init)
pdata->phy_init(pdev, S5P_USB_PHY_HOST);
/* DMA burst Enable */
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
ehci_resume(hcd, false);
return 0;
}
#else
#define s5p_ehci_suspend NULL
#define s5p_ehci_resume NULL
#endif
static const struct dev_pm_ops s5p_ehci_pm_ops = {
.suspend = s5p_ehci_suspend,
.resume = s5p_ehci_resume,
};
#ifdef CONFIG_OF
static const struct of_device_id exynos_ehci_match[] = {
{ .compatible = "samsung,exynos-ehci" },
{},
};
MODULE_DEVICE_TABLE(of, exynos_ehci_match);
#endif
static struct platform_driver s5p_ehci_driver = {
.probe = s5p_ehci_probe,
.remove = __devexit_p(s5p_ehci_remove),
.shutdown = s5p_ehci_shutdown,
.driver = {
.name = "s5p-ehci",
.owner = THIS_MODULE,
.pm = &s5p_ehci_pm_ops,
.of_match_table = of_match_ptr(exynos_ehci_match),
}
};
MODULE_ALIAS("platform:s5p-ehci");