linux/arch/arm/boot/dts/exynos4412-trats2.dts
Naveen Krishna Chatradhi e138d4333a ARM: dts: fix the chip select gpios definition in the SPI nodes
This patch replaces the "cs-gpio" from "controller-data" node
as was specified in the old binding and uses the standard
"cs-gpios" property expected by the SPI core as is defined now
in the spi-s3c64xx driver DT binding.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-17 19:37:50 +01:00

789 lines
18 KiB
Plaintext

/*
* Samsung's Exynos4412 based Trats 2 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Device tree source file for Samsung's Trats 2 board which is based on
* Samsung's Exynos4412 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos4412.dtsi"
/ {
model = "Samsung Trats 2 based on Exynos4412";
compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
aliases {
i2c9 = &i2c_ak8975;
i2c10 = &i2c_cm36651;
};
memory {
reg = <0x40000000 0x40000000>;
};
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
};
firmware@0204F000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
};
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti", "fixed-clock";
clock-frequency = <0>;
};
xusbxti {
compatible = "samsung,clock-xusbxti", "fixed-clock";
clock-frequency = <24000000>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vemmc_reg: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpk0 2 0>;
enable-active-high;
};
cam_io_reg: voltage-regulator-1 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpm0 2 0>;
enable-active-high;
};
lcd_vdd3_reg: voltage-regulator-2 {
compatible = "regulator-fixed";
regulator-name = "LCD_VDD_2.2V";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
gpio = <&gpc0 1 0>;
enable-active-high;
};
cam_af_reg: voltage-regulator-3 {
compatible = "regulator-fixed";
regulator-name = "CAM_AF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpm0 4 0>;
enable-active-high;
};
cam_isp_core_reg: voltage-regulator-4 {
compatible = "regulator-fixed";
regulator-name = "CAM_ISP_CORE_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&gpm0 3 0>;
enable-active-high;
regulator-always-on;
};
ps_als_reg: voltage-regulator-5 {
compatible = "regulator-fixed";
regulator-name = "LED_A_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpj0 5 0>;
enable-active-high;
};
};
gpio-keys {
compatible = "gpio-keys";
key-down {
gpios = <&gpx3 3 1>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
key-up {
gpios = <&gpx2 2 1>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
key-power {
gpios = <&gpx2 7 1>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
gpio-key,wakeup;
};
key-ok {
gpios = <&gpx0 1 1>;
linux,code = <139>;
label = "ok";
debounce-inteval = <10>;
gpio-key,wakeup;
};
};
adc: adc@126C0000 {
vdd-supply = <&ldo3_reg>;
status = "okay";
};
i2c@13890000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <400000>;
pinctrl-0 = <&i2c3_bus>;
pinctrl-names = "default";
status = "okay";
mms114-touchscreen@48 {
compatible = "melfas,mms114";
reg = <0x48>;
interrupt-parent = <&gpm2>;
interrupts = <3 2>;
x-size = <720>;
y-size = <1280>;
avdd-supply = <&ldo23_reg>;
vdd-supply = <&ldo24_reg>;
};
};
i2c_0: i2c@13860000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <400000>;
pinctrl-0 = <&i2c0_bus>;
pinctrl-names = "default";
status = "okay";
s5c73m3@3c {
compatible = "samsung,s5c73m3";
reg = <0x3c>;
standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
vdd-int-supply = <&buck9_reg>;
vddio-cis-supply = <&ldo9_reg>;
vdda-supply = <&ldo17_reg>;
vddio-host-supply = <&ldo18_reg>;
vdd-af-supply = <&cam_af_reg>;
vdd-reg-supply = <&cam_io_reg>;
clock-frequency = <24000000>;
/* CAM_A_CLKOUT */
clocks = <&camera 0>;
clock-names = "cis_extclk";
port {
s5c73m3_ep: endpoint {
remote-endpoint = <&csis0_ep>;
data-lanes = <1 2 3 4>;
};
};
};
};
i2c@138D0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <100000>;
pinctrl-0 = <&i2c7_bus>;
pinctrl-names = "default";
status = "okay";
max77686_pmic@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
interrupts = <7 0>;
reg = <0x09>;
#clock-cells = <1>;
voltage-regulators {
ldo1_reg: ldo1 {
regulator-compatible = "LDO1";
regulator-name = "VALIVE_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-mem-on;
};
ldo2_reg: ldo2 {
regulator-compatible = "LDO2";
regulator-name = "VM1M2_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-mem-on;
};
ldo3_reg: ldo3 {
regulator-compatible = "LDO3";
regulator-name = "VCC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-mem-on;
};
ldo4_reg: ldo4 {
regulator-compatible = "LDO4";
regulator-name = "VCC_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-mem-on;
};
ldo5_reg: ldo5 {
regulator-compatible = "LDO5";
regulator-name = "VCC_1.8V_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-mem-on;
};
ldo6_reg: ldo6 {
regulator-compatible = "LDO6";
regulator-name = "VMPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-mem-on;
};
ldo7_reg: ldo7 {
regulator-compatible = "LDO7";
regulator-name = "VPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-mem-on;
};
ldo8_reg: ldo8 {
regulator-compatible = "LDO8";
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-mem-off;
};
ldo9_reg: ldo9 {
regulator-compatible = "LDO9";
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-mem-idle;
};
ldo10_reg: ldo10 {
regulator-compatible = "LDO10";
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-off;
};
ldo11_reg: ldo11 {
regulator-compatible = "LDO11";
regulator-name = "VABB1_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
regulator-mem-off;
};
ldo12_reg: ldo12 {
regulator-compatible = "LDO12";
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-mem-off;
};
ldo13_reg: ldo13 {
regulator-compatible = "LDO13";
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo14_reg: ldo14 {
regulator-compatible = "LDO14";
regulator-name = "VABB2_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
regulator-mem-off;
};
ldo15_reg: ldo15 {
regulator-compatible = "LDO15";
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-mem-off;
};
ldo16_reg: ldo16 {
regulator-compatible = "LDO16";
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-off;
};
ldo17_reg: ldo17 {
regulator-compatible = "LDO17";
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-mem-idle;
};
ldo18_reg: ldo18 {
regulator-compatible = "LDO18";
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo19_reg: ldo19 {
regulator-compatible = "LDO19";
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo20_reg: ldo20 {
regulator-compatible = "LDO20";
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo21_reg: ldo21 {
regulator-compatible = "LDO21";
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-mem-idle;
};
ldo22_reg: ldo22 {
regulator-compatible = "LDO22";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-mem-off;
};
ldo23_reg: ldo23 {
regulator-compatible = "LDO23";
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-mem-idle;
};
ldo24_reg: ldo24 {
regulator-compatible = "LDO24";
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-mem-idle;
};
ldo25_reg: ldo25 {
regulator-compatible = "LDO25";
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-mem-idle;
};
ldo26_reg: ldo26 {
regulator-compatible = "LDO26";
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-mem-idle;
};
buck1_reg: buck1 {
regulator-compatible = "BUCK1";
regulator-name = "vdd_mif";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
regulator-mem-off;
};
buck2_reg: buck2 {
regulator-compatible = "BUCK2";
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-mem-off;
};
buck3_reg: buck3 {
regulator-compatible = "BUCK3";
regulator-name = "vdd_int";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
regulator-mem-off;
};
buck4_reg: buck4 {
regulator-compatible = "BUCK4";
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-mem-off;
};
buck5_reg: buck5 {
regulator-compatible = "BUCK5";
regulator-name = "VMEM_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
buck6_reg: buck6 {
regulator-compatible = "BUCK6";
regulator-name = "VCC_SUB_1.35V";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
buck7_reg: buck7 {
regulator-compatible = "BUCK7";
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
buck8_reg: buck8 {
regulator-compatible = "BUCK8";
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-mem-off;
};
buck9_reg: buck9 {
regulator-compatible = "BUCK9";
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
regulator-mem-off;
};
};
};
};
mmc@12550000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
non-removable;
card-detect-delay = <200>;
vmmc-supply = <&vemmc_reg>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <0>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
status = "okay";
slot@0 {
reg = <0>;
bus-width = <8>;
};
};
serial@13800000 {
status = "okay";
};
serial@13810000 {
status = "okay";
};
serial@13820000 {
status = "okay";
};
serial@13830000 {
status = "okay";
};
i2c_ak8975: i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&gpy2 4 0>, <&gpy2 5 0>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ak8975@0c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 0>;
};
};
i2c_cm36651: i2c-gpio-2 {
compatible = "i2c-gpio";
gpios = <&gpf0 0 1>, <&gpf0 1 1>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
cm36651@18 {
compatible = "capella,cm36651";
reg = <0x18>;
interrupt-parent = <&gpx0>;
interrupts = <2 2>;
vled-supply = <&ps_als_reg>;
};
};
spi_1: spi@13930000 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
cs-gpios = <&gpb 5 0>;
status = "okay";
s5c73m3_spi: s5c73m3 {
compatible = "samsung,s5c73m3";
spi-max-frequency = <50000000>;
reg = <0>;
controller-data {
samsung,spi-feedback-delay = <2>;
};
};
};
dsi_0: dsi@11C80000 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
samsung,pll-clock-frequency = <24000000>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&dsi_in>;
samsung,burst-clock-frequency = <500000000>;
samsung,esc-clock-frequency = <20000000>;
};
};
};
panel@0 {
compatible = "samsung,s6e8aa0";
reg = <0>;
vdd3-supply = <&lcd_vdd3_reg>;
vci-supply = <&ldo25_reg>;
reset-gpios = <&gpy4 5 0>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
flip-horizontal;
flip-vertical;
panel-width-mm = <58>;
panel-height-mm = <103>;
display-timings {
timing-0 {
clock-frequency = <0>;
hactive = <720>;
vactive = <1280>;
hfront-porch = <5>;
hback-porch = <5>;
hsync-len = <5>;
vfront-porch = <13>;
vback-porch = <1>;
vsync-len = <2>;
};
};
port {
dsi_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
};
fimd@11c00000 {
status = "okay";
};
camera: camera {
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
status = "okay";
fimc_0: fimc@11800000 {
status = "okay";
};
fimc_1: fimc@11810000 {
status = "okay";
};
fimc_2: fimc@11820000 {
status = "okay";
};
fimc_3: fimc@11830000 {
status = "okay";
};
csis_0: csis@11880000 {
status = "okay";
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
clock-frequency = <176000000>;
/* Camera C (3) MIPI CSI-2 (CSIS0) */
port@3 {
reg = <3>;
csis0_ep: endpoint {
remote-endpoint = <&s5c73m3_ep>;
data-lanes = <1 2 3 4>;
samsung,csis-hs-settle = <12>;
};
};
};
csis_1: csis@11890000 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
clock-frequency = <160000000>;
status = "okay";
/* Camera D (4) MIPI CSI-2 (CSIS1) */
port@4 {
reg = <4>;
csis1_ep: endpoint {
remote-endpoint = <&is_s5k6a3_ep>;
data-lanes = <1>;
samsung,csis-hs-settle = <18>;
samsung,csis-wclk;
};
};
};
fimc_lite_0: fimc-lite@12390000 {
status = "okay";
};
fimc_lite_1: fimc-lite@123A0000 {
status = "okay";
};
fimc-is@12000000 {
pinctrl-0 = <&fimc_is_uart>;
pinctrl-names = "default";
status = "okay";
i2c1_isp: i2c-isp@12140000 {
pinctrl-0 = <&fimc_is_i2c1>;
pinctrl-names = "default";
s5k6a3@10 {
compatible = "samsung,s5k6a3";
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
svddio-supply = <&ldo19_reg>;
afvdd-supply = <&ldo19_reg>;
clock-frequency = <24000000>;
/* CAM_B_CLKOUT */
clocks = <&camera 1>;
clock-names = "extclk";
samsung,camclk-out = <1>;
gpios = <&gpm1 6 0>;
port {
is_s5k6a3_ep: endpoint {
remote-endpoint = <&csis1_ep>;
data-lanes = <1>;
};
};
};
};
};
};
exynos-usbphy@125B0000 {
status = "okay";
};
hsotg@12480000 {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
status = "okay";
};
thermistor-ap@0 {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 1>; /* AP temperature */
};
thermistor-battery@1 {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 2>; /* Battery temperature */
};
};