linux/arch/arm/boot/dts/kirkwood-nsa310a.dts
Olof Johansson 61e810d364 mvebu DT changes for v3.16
- kirkwood
     - rework nsa3x0 board to add nsa320
     - large cleanup to facilitate use in barebox
     - guruplug phy updates
     - audio updates for t5325
 
  - mvebu
     - use clocks vice clock-frequency for uart nodes
 
     - armada 375/380/385
        - add watchdog node
        - add coherency fabric
        - add smp support
        - add sdhci
        - add ahci
        - add thermal sensor
 
     - armada 370/XP
        - and pmsu
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTa6c8AAoJEP45WPkGe8ZnwB8P/0jFC/tWujz/ndmri/lx8+pi
 rRzyuHg2MCG81lAsJD2dvCh1IWqSg4YM3JWGjiqTNDVn526iVnp9FuJ8SmLiursL
 KG0P1CX+uFqXY181DZBi1OFy3bIz2T/brrA48r6tAVoO3IiZ9v5UnaNz/QokCM+Z
 Yrx1d8sSi5i5/1IqycPOS6TpZ9WcKXAgJFPv7FnvPtKnOxWir7lMW609zCdc54yg
 vx/UQiBIMqgsgNYnwHIe4CjRcjgrg6f4i1Y10XHFK++w3vo9B4lZM67FKfv/Lslq
 z7zWC74v5/lA+SBW5Wb9fWqRxdMEcg8AtA1gQ4qc5phMrVSUZwFRp701goCLhf8j
 t9Hmf5fcVoVLGDTpbcoCuXYCD512VwP5/rv3OtrJ8hGiCajt7JegiRd66TgM6YhQ
 awf2Ss3xEWsmDjSijKN4/zJfn9zzCFwRjdsjBrpXDmi8XH73Obt2Hug/koa1rr86
 wFynL2KWkAmetPXFutOkU17zeOPZ4fs/oloCxpRO2jC8gaWLImO0jiCyMFZYEI4K
 bhIQjhD/rGPPnc4QyQ6Zln9f055tSlH/k5jycp2sGvqmbefTGawvLozi11wu1TXa
 aUeT3dRzXiK4qFn54YkgHwRM6Kp/pZMRXeeW9N27at+/CE9TIE1ZfR4jrTiXf7XS
 70CTD4ElIKbA7fI5gXnS
 =qPr0
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu into next/dt

Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper:

mvebu DT changes for v3.16

 - kirkwood
    - rework nsa3x0 board to add nsa320
    - large cleanup to facilitate use in barebox
    - guruplug phy updates
    - audio updates for t5325

 - mvebu
    - use clocks vice clock-frequency for uart nodes

    - armada 375/380/385
       - add watchdog node
       - add coherency fabric
       - add smp support
       - add sdhci
       - add ahci
       - add thermal sensor

    - armada 370/XP
       - and pmsu

* tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits)
  ARM: Kirkwood: t5325: Use simple card to instantiate audio
  ARM: Kirkwood: DT: Add missing #sound-dai-cells property
  ARM: Kirkwood: Add node for audio codec
  ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
  ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
  ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
  ARM: dts: kirkwood: set default pinctrl for I2C0
  ARM: dts: kirkwood: set default pinctrl for NAND
  ARM: dts: kirkwood: set default pinctrl for SPI0
  ARM: dts: kirkwood: set default pinctrl for UART0/1
  ARM: dts: kirkwood: set default pinctrl for GBE1
  ARM: dts: kirkwood: consolidate common pinctrl settings
  ARM: dts: kirkwood: add pinctrl node to common SoC include
  ARM: dts: kirkwood: rename pin-controller nodes
  ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
  ARM: dts: kirkwood: add stdout-path property to all boards
  ARM: dts: kirkwood: add node labels
  ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC
  ARM: mvebu: Enable the thermal sensor in Armada 375 SoC
  ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-19 21:55:03 -07:00

115 lines
2.2 KiB
Plaintext

/dts-v1/;
#include "kirkwood-nsa3x0-common.dtsi"
/*
* There are at least two different NSA310 designs. This variant does
* not have the red USB Led.
*/
/ {
compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-names = "default";
pmx_led_esata_green: pmx-led-esata-green {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_led_esata_red: pmx-led-esata-red {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_led_usb_green: pmx-led-usb-green {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_led_sys_red: pmx-led-sys-red {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_hdd_red: pmx-led-hdd-red {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
lm85: lm85@2e {
compatible = "national,lm85";
reg = <0x2e>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
green-sys {
label = "nsa310:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
red-sys {
label = "nsa310:red:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd {
label = "nsa310:green:hdd";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
red-hdd {
label = "nsa310:red:hdd";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
green-esata {
label = "nsa310:green:esata";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
red-esata {
label = "nsa310:red:esata";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "nsa310:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
green-copy {
label = "nsa310:green:copy";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
red-copy {
label = "nsa310:red:copy";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
};