linux/arch/arm/mach-omap2/sr_device.c
Paul Walmsley 6efc3fe0f4 ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
Commit c1d1cd597f ("ARM: OMAP2+:
omap_device: remove obsolete pm_lats and early_device code") missed a
few omap_device_build() calls that aren't included as part of the default
OMAP2+ Kconfig, omap2plus_defconfig.

Ideally, all devices that are present on the SoC should be created by
default, and only the corresponding device driver should be configured
or deconfigured in Kconfig.  This allows drivers to be built as
modules and loaded later, even if they weren't part of the original
kernel build.  Unfortunately, we're not quite there yet.

Thanks to Tony Lindgren for reporting this, found during his
randconfig tests.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-12 09:00:33 -08:00

178 lines
4.5 KiB
C

/*
* OMAP3/OMAP4 smartreflex device file
*
* Author: Thara Gopinath <thara@ti.com>
*
* Based originally on code from smartreflex.c
* Copyright (C) 2010 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008 Nokia Corporation
* Kalle Jokiniemi
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Lesly A M <x0080970@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/power/smartreflex.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/io.h>
#include "soc.h"
#include "omap_device.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
static bool sr_enable_on_init;
/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
{
struct omap_sr_nvalue_table *nvalue_table;
int i, j, count = 0;
sr_data->nvalue_count = 0;
sr_data->nvalue_table = NULL;
while (volt_data[count].volt_nominal)
count++;
nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
GFP_KERNEL);
if (!nvalue_table) {
pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
return;
}
for (i = 0, j = 0; i < count; i++) {
u32 v;
/*
* In OMAP4 the efuse registers are 24 bit aligned.
* A __raw_readl will fail for non-32 bit aligned address
* and hence the 8-bit read and shift.
*/
if (cpu_is_omap44xx()) {
u16 offset = volt_data[i].sr_efuse_offs;
v = omap_ctrl_readb(offset) |
omap_ctrl_readb(offset + 1) << 8 |
omap_ctrl_readb(offset + 2) << 16;
} else {
v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
}
/*
* Many OMAP SoCs don't have the eFuse values set.
* For example, pretty much all OMAP3xxx before
* ES3.something.
*
* XXX There needs to be some way for board files or
* userspace to add these in.
*/
if (v == 0)
continue;
nvalue_table[j].nvalue = v;
nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
j++;
}
sr_data->nvalue_table = nvalue_table;
sr_data->nvalue_count = j;
}
static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data;
struct platform_device *pdev;
struct omap_volt_data *volt_data;
struct omap_smartreflex_dev_attr *sr_dev_attr;
char *name = "smartreflex";
static int i;
sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
if (!sr_data) {
pr_err("%s: Unable to allocate memory for %s sr_data\n",
__func__, oh->name);
return -ENOMEM;
}
sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
__func__, oh->name);
goto exit;
}
sr_data->name = oh->name;
sr_data->ip_type = oh->class->rev;
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sr_data->err_weight = OMAP3430_SR_ERRWEIGHT;
sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
sr_data->accum_data = OMAP3430_SR_ACCUMDATA;
if (!(strcmp(sr_data->name, "smartreflex_mpu"))) {
sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
} else {
sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
}
}
sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
if (!sr_data->voltdm) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, sr_dev_attr->sensor_voltdm_name);
goto exit;
}
omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
if (!volt_data) {
pr_err("%s: No Voltage table registered for VDD%d\n",
__func__, i + 1);
goto exit;
}
sr_set_nvalues(volt_data, sr_data);
sr_data->enable_on_init = sr_enable_on_init;
pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
if (IS_ERR(pdev))
pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
__func__, name, oh->name);
exit:
i++;
kfree(sr_data);
return 0;
}
/*
* API to be called from board files to enable smartreflex
* autocompensation at init.
*/
void __init omap_enable_smartreflex_on_init(void)
{
sr_enable_on_init = true;
}
int __init omap_devinit_smartreflex(void)
{
return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
}