mirror of
https://github.com/torvalds/linux
synced 2024-10-08 04:12:40 +00:00
2a22b7ae2f
Wangxun NICs support the connection with SFP to RJ45 module. In this case, PCS need to be configured in SGMII mode. According to chapter 6.11.1 "SGMII Auto-Negitiation" of DesignWare Cores Ethernet PCS (version 3.20a) and custom design manual, do the following configuration when the interface mode is SGMII. 1. program VR_MII_AN_CTRL bit(3) [TX_CONFIG] = 1b (PHY side SGMII) 2. program VR_MII_AN_CTRL bit(8) [MII_CTRL] = 1b (8-bit MII) 3. program VR_MII_DIG_CTRL1 bit(0) [PHY_MODE_CTRL] = 1b Also CL37 AN in backplane configurations need to be enabled because of the special hardware design. Another thing to note is that PMA needs to be reconfigured before each CL37 AN configuration for SGMII, otherwise AN will fail, although we don't know why. On this device, CL37_ANSGM_STS (bit[4:1] of VR_MII_AN_INTR_STS) indicates the status received from remote link during the auto-negotiation, and self-clear after the auto-negotiation is complete. Meanwhile, CL37_ANCMPLT_INTR will be set to 1, to indicate CL37 AN is complete. So add another way to get the state for CL37 SGMII. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| pcs-lynx.c | ||
| pcs-mtk-lynxi.c | ||
| pcs-rzn1-miic.c | ||
| pcs-xpcs-nxp.c | ||
| pcs-xpcs-wx.c | ||
| pcs-xpcs.c | ||
| pcs-xpcs.h | ||