linux/drivers/isdn/hisax/st5481_b.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

381 lines
9.7 KiB
C

/*
* Driver for ST5481 USB ISDN modem
*
* Author Frode Isaksen
* Copyright 2001 by Frode Isaksen <fisaksen@bewan.com>
* 2001 by Kai Germaschewski <kai.germaschewski@gmx.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/usb.h>
#include <linux/netdevice.h>
#include <linux/bitrev.h>
#include "st5481.h"
static inline void B_L1L2(struct st5481_bcs *bcs, int pr, void *arg)
{
struct hisax_if *ifc = (struct hisax_if *) &bcs->b_if;
ifc->l1l2(ifc, pr, arg);
}
/*
* Encode and transmit next frame.
*/
static void usb_b_out(struct st5481_bcs *bcs,int buf_nr)
{
struct st5481_b_out *b_out = &bcs->b_out;
struct st5481_adapter *adapter = bcs->adapter;
struct urb *urb;
unsigned int packet_size,offset;
int len,buf_size,bytes_sent;
int i;
struct sk_buff *skb;
if (test_and_set_bit(buf_nr, &b_out->busy)) {
DBG(4,"ep %d urb %d busy",(bcs->channel+1)*2,buf_nr);
return;
}
urb = b_out->urb[buf_nr];
// Adjust isoc buffer size according to flow state
if(b_out->flow_event & (OUT_DOWN | OUT_UNDERRUN)) {
buf_size = NUM_ISO_PACKETS_B*SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST;
packet_size = SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST;
DBG(4,"B%d,adjust flow,add %d bytes",bcs->channel+1,B_FLOW_ADJUST);
} else if(b_out->flow_event & OUT_UP){
buf_size = NUM_ISO_PACKETS_B*SIZE_ISO_PACKETS_B_OUT - B_FLOW_ADJUST;
packet_size = SIZE_ISO_PACKETS_B_OUT - B_FLOW_ADJUST;
DBG(4,"B%d,adjust flow,remove %d bytes",bcs->channel+1,B_FLOW_ADJUST);
} else {
buf_size = NUM_ISO_PACKETS_B*SIZE_ISO_PACKETS_B_OUT;
packet_size = 8;
}
b_out->flow_event = 0;
len = 0;
while (len < buf_size) {
if ((skb = b_out->tx_skb)) {
DBG_SKB(0x100, skb);
DBG(4,"B%d,len=%d",bcs->channel+1,skb->len);
if (bcs->mode == L1_MODE_TRANS) {
bytes_sent = buf_size - len;
if (skb->len < bytes_sent)
bytes_sent = skb->len;
{ /* swap tx bytes to get hearable audio data */
register unsigned char *src = skb->data;
register unsigned char *dest = urb->transfer_buffer+len;
register unsigned int count;
for (count = 0; count < bytes_sent; count++)
*dest++ = bitrev8(*src++);
}
len += bytes_sent;
} else {
len += isdnhdlc_encode(&b_out->hdlc_state,
skb->data, skb->len, &bytes_sent,
urb->transfer_buffer+len, buf_size-len);
}
skb_pull(skb, bytes_sent);
if (!skb->len) {
// Frame sent
b_out->tx_skb = NULL;
B_L1L2(bcs, PH_DATA | CONFIRM, (void *)(unsigned long) skb->truesize);
dev_kfree_skb_any(skb);
/* if (!(bcs->tx_skb = skb_dequeue(&bcs->sq))) { */
/* st5481B_sched_event(bcs, B_XMTBUFREADY); */
/* } */
}
} else {
if (bcs->mode == L1_MODE_TRANS) {
memset(urb->transfer_buffer+len, 0xff, buf_size-len);
len = buf_size;
} else {
// Send flags
len += isdnhdlc_encode(&b_out->hdlc_state,
NULL, 0, &bytes_sent,
urb->transfer_buffer+len, buf_size-len);
}
}
}
// Prepare the URB
for (i = 0, offset = 0; offset < len; i++) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = packet_size;
offset += packet_size;
packet_size = SIZE_ISO_PACKETS_B_OUT;
}
urb->transfer_buffer_length = len;
urb->number_of_packets = i;
urb->dev = adapter->usb_dev;
DBG_ISO_PACKET(0x200,urb);
SUBMIT_URB(urb, GFP_NOIO);
}
/*
* Start transfering (flags or data) on the B channel, since
* FIFO counters has been set to a non-zero value.
*/
static void st5481B_start_xfer(void *context)
{
struct st5481_bcs *bcs = context;
DBG(4,"B%d",bcs->channel+1);
// Start transmitting (flags or data) on B channel
usb_b_out(bcs,0);
usb_b_out(bcs,1);
}
/*
* If the adapter has only 2 LEDs, the green
* LED will blink with a rate depending
* on the number of channels opened.
*/
static void led_blink(struct st5481_adapter *adapter)
{
u_char leds = adapter->leds;
// 50 frames/sec for each channel
if (++adapter->led_counter % 50) {
return;
}
if (adapter->led_counter % 100) {
leds |= GREEN_LED;
} else {
leds &= ~GREEN_LED;
}
st5481_usb_device_ctrl_msg(adapter, GPIO_OUT, leds, NULL, NULL);
}
static void usb_b_out_complete(struct urb *urb)
{
struct st5481_bcs *bcs = urb->context;
struct st5481_b_out *b_out = &bcs->b_out;
struct st5481_adapter *adapter = bcs->adapter;
int buf_nr;
buf_nr = get_buf_nr(b_out->urb, urb);
test_and_clear_bit(buf_nr, &b_out->busy);
if (unlikely(urb->status < 0)) {
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(4,"urb killed status %d", urb->status);
return; // Give up
default:
WARNING("urb status %d",urb->status);
if (b_out->busy == 0) {
st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);
}
break;
}
}
usb_b_out(bcs,buf_nr);
if (adapter->number_of_leds == 2)
led_blink(adapter);
}
/*
* Start or stop the transfer on the B channel.
*/
static void st5481B_mode(struct st5481_bcs *bcs, int mode)
{
struct st5481_b_out *b_out = &bcs->b_out;
struct st5481_adapter *adapter = bcs->adapter;
DBG(4,"B%d,mode=%d", bcs->channel + 1, mode);
if (bcs->mode == mode)
return;
bcs->mode = mode;
// Cancel all USB transfers on this B channel
usb_unlink_urb(b_out->urb[0]);
usb_unlink_urb(b_out->urb[1]);
b_out->busy = 0;
st5481_in_mode(&bcs->b_in, mode);
if (bcs->mode != L1_MODE_NULL) {
// Open the B channel
if (bcs->mode != L1_MODE_TRANS) {
u32 features = HDLC_BITREVERSE;
if (bcs->mode == L1_MODE_HDLC_56K)
features |= HDLC_56KBIT;
isdnhdlc_out_init(&b_out->hdlc_state, features);
}
st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2, NULL, NULL);
// Enable B channel interrupts
st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel*2),
OUT_UP+OUT_DOWN+OUT_UNDERRUN, NULL, NULL);
// Enable B channel FIFOs
st5481_usb_device_ctrl_msg(adapter, OUT_B1_COUNTER+(bcs->channel*2), 32, st5481B_start_xfer, bcs);
if (adapter->number_of_leds == 4) {
if (bcs->channel == 0) {
adapter->leds |= B1_LED;
} else {
adapter->leds |= B2_LED;
}
}
} else {
// Disble B channel interrupts
st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel*2), 0, NULL, NULL);
// Disable B channel FIFOs
st5481_usb_device_ctrl_msg(adapter, OUT_B1_COUNTER+(bcs->channel*2), 0, NULL, NULL);
if (adapter->number_of_leds == 4) {
if (bcs->channel == 0) {
adapter->leds &= ~B1_LED;
} else {
adapter->leds &= ~B2_LED;
}
} else {
st5481_usb_device_ctrl_msg(adapter, GPIO_OUT, adapter->leds, NULL, NULL);
}
if (b_out->tx_skb) {
dev_kfree_skb_any(b_out->tx_skb);
b_out->tx_skb = NULL;
}
}
}
static int st5481_setup_b_out(struct st5481_bcs *bcs)
{
struct usb_device *dev = bcs->adapter->usb_dev;
struct usb_interface *intf;
struct usb_host_interface *altsetting = NULL;
struct usb_host_endpoint *endpoint;
struct st5481_b_out *b_out = &bcs->b_out;
DBG(4,"");
intf = usb_ifnum_to_if(dev, 0);
if (intf)
altsetting = usb_altnum_to_altsetting(intf, 3);
if (!altsetting)
return -ENXIO;
// Allocate URBs and buffers for the B channel out
endpoint = &altsetting->endpoint[EP_B1_OUT - 1 + bcs->channel * 2];
DBG(4,"endpoint address=%02x,packet size=%d",
endpoint->desc.bEndpointAddress, le16_to_cpu(endpoint->desc.wMaxPacketSize));
// Allocate memory for 8000bytes/sec + extra bytes if underrun
return st5481_setup_isocpipes(b_out->urb, dev,
usb_sndisocpipe(dev, endpoint->desc.bEndpointAddress),
NUM_ISO_PACKETS_B, SIZE_ISO_PACKETS_B_OUT,
NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST,
usb_b_out_complete, bcs);
}
static void st5481_release_b_out(struct st5481_bcs *bcs)
{
struct st5481_b_out *b_out = &bcs->b_out;
DBG(4,"");
st5481_release_isocpipes(b_out->urb);
}
int st5481_setup_b(struct st5481_bcs *bcs)
{
int retval;
DBG(4,"");
retval = st5481_setup_b_out(bcs);
if (retval)
goto err;
bcs->b_in.bufsize = HSCX_BUFMAX;
bcs->b_in.num_packets = NUM_ISO_PACKETS_B;
bcs->b_in.packet_size = SIZE_ISO_PACKETS_B_IN;
bcs->b_in.ep = (bcs->channel ? EP_B2_IN : EP_B1_IN) | USB_DIR_IN;
bcs->b_in.counter = bcs->channel ? IN_B2_COUNTER : IN_B1_COUNTER;
bcs->b_in.adapter = bcs->adapter;
bcs->b_in.hisax_if = &bcs->b_if.ifc;
retval = st5481_setup_in(&bcs->b_in);
if (retval)
goto err_b_out;
return 0;
err_b_out:
st5481_release_b_out(bcs);
err:
return retval;
}
/*
* Release buffers and URBs for the B channels
*/
void st5481_release_b(struct st5481_bcs *bcs)
{
DBG(4,"");
st5481_release_in(&bcs->b_in);
st5481_release_b_out(bcs);
}
/*
* st5481_b_l2l1 is the entry point for upper layer routines that want to
* transmit on the B channel. PH_DATA | REQUEST is a normal packet that
* we either start transmitting (if idle) or queue (if busy).
* PH_PULL | REQUEST can be called to request a callback message
* (PH_PULL | CONFIRM)
* once the link is idle. After a "pull" callback, the upper layer
* routines can use PH_PULL | INDICATION to send data.
*/
void st5481_b_l2l1(struct hisax_if *ifc, int pr, void *arg)
{
struct st5481_bcs *bcs = ifc->priv;
struct sk_buff *skb = arg;
long mode;
DBG(4, "");
switch (pr) {
case PH_DATA | REQUEST:
BUG_ON(bcs->b_out.tx_skb);
bcs->b_out.tx_skb = skb;
break;
case PH_ACTIVATE | REQUEST:
mode = (long) arg;
DBG(4,"B%d,PH_ACTIVATE_REQUEST %ld", bcs->channel + 1, mode);
st5481B_mode(bcs, mode);
B_L1L2(bcs, PH_ACTIVATE | INDICATION, NULL);
break;
case PH_DEACTIVATE | REQUEST:
DBG(4,"B%d,PH_DEACTIVATE_REQUEST", bcs->channel + 1);
st5481B_mode(bcs, L1_MODE_NULL);
B_L1L2(bcs, PH_DEACTIVATE | INDICATION, NULL);
break;
default:
WARNING("pr %#x\n", pr);
}
}