linux/arch/arc/kernel/head.S
Vineet Gupta 1f6ccfff63 ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
    - SMP configurations of upto 4 cores with coherency
    - Optional L2 Cache and IO-Coherency
    - Revised Interrupt Architecture (multiple priorites, reg banks,
        auto stack switch, auto regfile save/restore)
    - MMUv4 (PIPT dcache, Huge Pages)
    - Instructions for
	* 64bit load/store: LDD, STD
	* Hardware assisted divide/remainder: DIV, REM
	* Function prologue/epilogue: ENTER_S, LEAVE_S
	* IRQ enable/disable: CLRI, SETI
	* pop count: FFS, FLS
	* SETcc, BMSKN, XBFU...

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-22 14:06:55 +05:30

131 lines
3.5 KiB
ArmAsm

/*
* ARC CPU startup Code
*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Vineetg: Dec 2007
* -Check if we are running on Simulator or on real hardware
* to skip certain things during boot on simulator
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/entry.h>
#include <asm/arcregs.h>
#include <asm/cache.h>
.macro CPU_EARLY_SETUP
; Setting up Vectror Table (in case exception happens in early boot
sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE]
; Disable I-cache/D-cache if kernel so configured
lr r5, [ARC_REG_IC_BCR]
breq r5, 0, 1f ; I$ doesn't exist
lr r5, [ARC_REG_IC_CTRL]
#ifdef CONFIG_ARC_HAS_ICACHE
bclr r5, r5, 0 ; 0 - Enable, 1 is Disable
#else
bset r5, r5, 0 ; I$ exists, but is not used
#endif
sr r5, [ARC_REG_IC_CTRL]
1:
lr r5, [ARC_REG_DC_BCR]
breq r5, 0, 1f ; D$ doesn't exist
lr r5, [ARC_REG_DC_CTRL]
bclr r5, r5, 6 ; Invalidate (discard w/o wback)
#ifdef CONFIG_ARC_HAS_DCACHE
bclr r5, r5, 0 ; Enable (+Inv)
#else
bset r5, r5, 0 ; Disable (+Inv)
#endif
sr r5, [ARC_REG_DC_CTRL]
1:
.endm
.section .init.text, "ax",@progbits
.type stext, @function
.globl stext
stext:
;-------------------------------------------------------------------
; Don't clobber r0-r2 yet. It might have bootloader provided info
;-------------------------------------------------------------------
CPU_EARLY_SETUP
#ifdef CONFIG_SMP
; Ensure Boot (Master) proceeds. Others wait in platform dependent way
; IDENTITY Reg [ 3 2 1 0 ]
; (cpu-id) ^^^ => Zero for UP ARC700
; => #Core-ID if SMP (Master 0)
; Note that non-boot CPUs might not land here if halt-on-reset and
; instead breath life from @first_lines_of_secondary, but we still
; need to make sure only boot cpu takes this path.
GET_CPU_ID r5
cmp r5, 0
mov.ne r0, r5
jne arc_platform_smp_wait_to_boot
#endif
; Clear BSS before updating any globals
; XXX: use ZOL here
mov r5, __bss_start
sub r6, __bss_stop, r5
lsr.f lp_count, r6, 2
lpnz 1f
st.ab 0, [r5, 4]
1:
#ifdef CONFIG_ARC_UBOOT_SUPPORT
; Uboot - kernel ABI
; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
; r1 = magic number (board identity, unused as of now
; r2 = pointer to uboot provided cmdline or external DTB in mem
; These are handled later in setup_arch()
st r0, [@uboot_tag]
st r2, [@uboot_arg]
#endif
; setup "current" tsk and optionally cache it in dedicated r25
mov r9, @init_task
SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch
; setup stack (fp, sp)
mov fp, 0
; tsk->thread_info is really a PAGE, whose bottom hoists stack
GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output)
j start_kernel ; "C" entry point
#ifdef CONFIG_SMP
;----------------------------------------------------------------
; First lines of code run by secondary before jumping to 'C'
;----------------------------------------------------------------
.section .text, "ax",@progbits
.type first_lines_of_secondary, @function
.globl first_lines_of_secondary
first_lines_of_secondary:
CPU_EARLY_SETUP
; setup per-cpu idle task as "current" on this CPU
ld r0, [@secondary_idle_tsk]
SET_CURR_TASK_ON_CPU r0, r1
; setup stack (fp, sp)
mov fp, 0
; set it's stack base to tsk->thread_info bottom
GET_TSK_STACK_BASE r0, sp
j start_kernel_secondary
#endif