linux/Documentation/devicetree/bindings/unittest.txt
Rob Herring 4da722ca19 dt-bindings: Remove "status" from examples
Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-05 10:03:06 -05:00

67 lines
1.1 KiB
Plaintext

1) OF unittest platform device
** unittest
Required properties:
- compatible: must be "unittest"
All other properties are optional.
Example:
unittest {
compatible = "unittest";
};
2) OF unittest i2c adapter platform device
** platform device unittest adapter
Required properties:
- compatible: must be unittest-i2c-bus
Children nodes contain unittest i2c devices.
Example:
unittest-i2c-bus {
compatible = "unittest-i2c-bus";
};
3) OF unittest i2c device
** I2C unittest device
Required properties:
- compatible: must be unittest-i2c-dev
All other properties are optional
Example:
unittest-i2c-dev {
compatible = "unittest-i2c-dev";
};
4) OF unittest i2c mux device
** I2C unittest mux
Required properties:
- compatible: must be unittest-i2c-mux
Children nodes contain unittest i2c bus nodes per channel.
Example:
unittest-i2c-mux {
compatible = "unittest-i2c-mux";
#address-cells = <1>;
#size-cells = <0>;
channel-0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
i2c-dev {
reg = <8>;
compatible = "unittest-i2c-dev";
};
};
};