Roan van Dijk 3f3caf5b2e iio: chemical: scd4x: Add pressure compensation ... This patch adds pressure compensation to the scd4x driver. The pressure can be written to the sensor in hPa. The pressure will be compensated internally by the sensor. Signed-off-by: Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20230711101419.2065107-1-roan@protonic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2023-07-20 19:21:30 +01:00
..
accel	iio: accel: da280: Add support for the DA217 accelerometer	2023-07-20 19:21:29 +01:00
adc	iio: adc: ti-lmp92064: add buffering support	2023-07-20 19:21:30 +01:00
addac	iio: addac: ad74413: don't set DIN_SINK for functions other than digital input	2023-06-04 12:25:01 +01:00
afe	iio: afe: rescale: export symbols used during testing	2022-07-16 19:01:14 +01:00
amplifiers	iio: amplifiers: ad8366 Fix whitespace issue	2023-05-28 16:01:55 +01:00
buffer	iio: Don't silently expect attribute types	2022-11-23 19:44:04 +00:00
cdc	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
chemical	iio: chemical: scd4x: Add pressure compensation	2023-07-20 19:21:30 +01:00
common	iio: make invensense timestamp module generic	2023-07-20 19:21:28 +01:00
dac	1st set of IIO new device support, features and cleanup for the 6.5 cycle.	2023-06-15 13:01:55 +02:00
dummy	Bitmap patches for 5.19-rc1	2022-06-04 14:04:27 -07:00
filter	iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq()	2022-11-23 19:43:57 +00:00
frequency	iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify	2023-03-18 16:35:26 +00:00
gyro	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
health	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
humidity	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
imu	iio: imu: inv_mpu6050: read the full fifo when processing data	2023-07-20 19:21:30 +01:00
light	iio: light: vcnl4000: Add calibration bias for 4040/4200	2023-07-20 19:21:29 +01:00
magnetometer	1st set of IIO new device support, features and cleanup for the 6.5 cycle.	2023-06-15 13:01:55 +02:00
multiplexer	iio: multiplexer: Switch to use dev_err_probe() helper	2022-11-23 19:43:57 +00:00
orientation
position
potentiometer	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
potentiostat	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
pressure	iio: pressure: Honeywell mprls0025pa pressure sensor	2023-05-21 18:54:58 +01:00
proximity	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
resolver	iio: resolver: ad2s90: Fix alignment for DMA safety	2022-06-14 11:53:19 +01:00
temperature	iio: temperature: tmp006: Add OF device matching support	2023-05-28 20:22:03 +01:00
test	iio: test: Mark file local structure arrays static.	2022-08-15 22:30:01 +01:00
trigger	iio: Rename iio_trigger_poll_chained and add kernel-doc	2023-03-11 12:18:29 +00:00
iio_core.h
iio_core_trigger.h
industrialio-buffer.c	iio: buffer: fix coding style warnings	2023-05-13 17:56:06 +01:00
industrialio-configfs.c
industrialio-core.c	iio: core: Sort headers	2023-01-21 17:35:23 +00:00
industrialio-event.c	4th set of IIO fixes for 6.1	2022-11-27 15:05:05 +01:00
industrialio-gts-helper.c	iio: gts-helpers: fix integration time units	2023-05-13 17:54:57 +01:00
industrialio-sw-device.c	iio: Don't use bare "unsigned"	2022-07-01 11:19:08 +01:00
industrialio-sw-trigger.c	iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails	2022-11-12 17:53:35 +00:00
industrialio-trigger.c	iio: Make return value check for set_trigger_state() consistent	2023-07-20 19:21:30 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: fix coding style warnings	2022-08-15 22:30:00 +01:00
Kconfig	iio: light: Add gain-time-scale helpers	2023-04-10 12:26:34 +01:00
Makefile	iio: light: Add gain-time-scale helpers	2023-04-10 12:26:34 +01:00
TODO	iio: core: move 'mlock' to 'struct iio_dev_opaque'	2022-11-23 19:44:00 +00:00