linux/drivers/clk/Kconfig
Linus Torvalds 619b92b9c8 I'm actually surprised this time. There aren't any new Qualcomm SoC clk
drivers. And there's zero diff in the core clk framework. Instead we have new
 clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat
 because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high
 speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's
 the usual updates to various clk drivers for incorrect parent descriptions or
 mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
 interesting here.
 
 New Drivers:
  - STM32MP257 SoC clk driver
  - Airoha EN7581 SoC clk driver
  - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
  - Loongson-2k0500 and Loongson-2k2000 SoC clk driver
  - Add HSI0 and HSI2 clock controllers for Google GS101
  - Add i.MX95 BLK CTL clock driver
 
 Updates:
  - Allocate clk_ops dynamically for SCMI clk driver
  - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency
  - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues
  - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards
  - Cleanups and fixes for Qualcomm Stromer PLLs
  - Reduce max CPU frequency on Qualcomm APSS IPQ5018
  - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
    clk drivers
  - Make Qualcomm MSM8998 Venus clocks functional
  - Cleanup downstream remnants related to DisplayPort across Qualcomm
    SM8450, SM6350, SM8550, and SM8650
  - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
  - Use a specific Qualcomm QCS404 compatible for the otherwise generic
    HFPLL
  - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
  - Remove an unused field in the Qualcomm RPM clk driver
  - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
    global clock controller drivers
  - Allow choice of manual or firmware-driven control over PLLs, needed
    to fully implement CPU clock controllers on Exynos850
  - Correct PLL clock IDs on ExynosAutov9
  - Propagate certain clock rates to allow setting proper SPI clock
    rates on Google GS101
  - Mark certain Google GS101 clocks critical
  - Convert old S3C64xx clock controller bindings to DT schema
  - Add new PLL rate and missing mux on Rockchip rk3568
  - Add missing reset line on Rockchip rk3588
  - Removal of an unused field in struct rockchip_mmc_clock
  - Amlogic s4/a1: add regmap maximum register for proper debugfs dump
  - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
  - Amlogic pll driver: print clock name on lock error to help debug
  - Amlogic vclk: finish dsi clock path support
  - Amlogic license: fix occurence "GPL v2" as reported by checkpatch
  - Add PM runtime support to i.MX8MP Audiomix
  - Add DT schema for i.MX95 Display Master Block Control
  - Convert to platform remove callback returning void for i.MX8MP
    Audiomix
  - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M
  - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
  - Prepare power domain support for Renesas RZ/G2L family members, and add
    actual support on Renesas RZ/G3S SoC
  - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M
  - Add additional constraints to Allwinner A64 PLL MIPI clock
  - Fix autoloading sunxi-ng clocks when build as a module
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmZGs1MRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW2Pw/+OciG7jQzlWQD09M9qTSzygVu/0+NF8ez
 ecvLnWzz3b05GSWqfeG3mm09RmaTtggwPcWx4ad5NBDxGfhn+rT72WWJt6EjA1ln
 i/eNUQIlFZmiDM7Xwx6S841hcRbPz9/RRIeXtmiDkMWjsysr6MHlTkWWVMNfGkiE
 9jxM5BH6N04A4664k3a4qlcZkj2KNkOLeCyzMLtm5aIwBoL3fZ+Q3sqVTgp5imt1
 rzJgpGfN1QhAnd8kV2oIPtJEs9woZtRjCtTtLrTnoGf518uq25ZJx7Mz3Dx+ubUv
 dtOLjjXdM+Q/ou7DM3h7HRjiZC8Mp8CprwwoxEbckBL4gBWYPyu8e6eZNBsF+3Ol
 7WP3TZknDrWsUDxAcX37Euidd+hc8xtbXCQwm+QcugEee7ZXK4ElTgXwyH3FUqn2
 GBI5D0+/3WyoBLqVQ7nTkMV0ps5dHrpBj6J1u/7ZfvC23/E7/5CzIxULXt1hTOcI
 F1cqS78HLAc8BK3gw/63e5TtTMA4cItJD7InBB0jemfeoy03nuWzFbRUqtAStkHd
 BKxmGSV3XXMdGtiN5SFy3tk7NlKeFMiVBiTzD++Vx9IL3mCdArtULu93OfUIOzXW
 B/ekJKi9OHkJx3mBrbio6k4rugQDZovzWN9U2pDJtGCIaAXgYgwKuP8S9UwKLIcx
 R6QarNE5Rsc=
 =YoVJ
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "I'm actually surprised this time. There aren't any new Qualcomm SoC
  clk drivers. And there's zero diff in the core clk framework.

  Instead we have new clk drivers for STM and Sophgo, with
  Samsung^WGoogle in third for the diffstat because they introduced HSI0
  and HSI2 clk drivers for Google's GS101 SoC (high speed interface
  things like PCIe, UFS, and MMC).

  Beyond those big diffs there's the usual updates to various clk
  drivers for incorrect parent descriptions or mising
  MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
  interesting here.

  New Drivers:
   - STM32MP257 SoC clk driver
   - Airoha EN7581 SoC clk driver
   - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
   - Loongson-2k0500 and Loongson-2k2000 SoC clk driver
   - Add HSI0 and HSI2 clock controllers for Google GS101
   - Add i.MX95 BLK CTL clock driver

  Updates:
   - Allocate clk_ops dynamically for SCMI clk driver
   - Add support in qcom RCG and RCG2 for multiple configurations for
     the same frequency
   - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
     issues
   - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
     boards
   - Cleanups and fixes for Qualcomm Stromer PLLs
   - Reduce max CPU frequency on Qualcomm APSS IPQ5018
   - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
     clk drivers
   - Make Qualcomm MSM8998 Venus clocks functional
   - Cleanup downstream remnants related to DisplayPort across Qualcomm
     SM8450, SM6350, SM8550, and SM8650
   - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
   - Use a specific Qualcomm QCS404 compatible for the otherwise generic
     HFPLL
   - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
   - Remove an unused field in the Qualcomm RPM clk driver
   - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
     global clock controller drivers
   - Allow choice of manual or firmware-driven control over PLLs, needed
     to fully implement CPU clock controllers on Exynos850
   - Correct PLL clock IDs on ExynosAutov9
   - Propagate certain clock rates to allow setting proper SPI clock
     rates on Google GS101
   - Mark certain Google GS101 clocks critical
   - Convert old S3C64xx clock controller bindings to DT schema
   - Add new PLL rate and missing mux on Rockchip rk3568
   - Add missing reset line on Rockchip rk3588
   - Removal of an unused field in struct rockchip_mmc_clock
   - Amlogic s4/a1: add regmap maximum register for proper debugfs dump
   - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
   - Amlogic pll driver: print clock name on lock error to help debug
   - Amlogic vclk: finish dsi clock path support
   - Amlogic license: fix occurence "GPL v2" as reported by checkpatch
   - Add PM runtime support to i.MX8MP Audiomix
   - Add DT schema for i.MX95 Display Master Block Control
   - Convert to platform remove callback returning void for i.MX8MP
     Audiomix
   - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
     R-Car V4M
   - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
   - Prepare power domain support for Renesas RZ/G2L family members, and
     add actual support on Renesas RZ/G3S SoC
   - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
     R-Car V4M
   - Add additional constraints to Allwinner A64 PLL MIPI clock
   - Fix autoloading sunxi-ng clocks when build as a module"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
  clk: samsung: Don't register clkdev lookup for the fixed rate clocks
  clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
  clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
  clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
  clk: qcom: Fix SM_GPUCC_8650 dependencies
  clk: qcom: Fix SC_CAMCC_8280XP dependencies
  dt-bindings: clocks: stm32mp25: add access-controllers description
  clock, reset: microchip: move all mpfs reset code to the reset subsystem
  clk: samsung: gs101: drop unused HSI2 clock parent data
  clk: rockchip: rk3568: Add PLL rate for 724 MHz
  clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
  dt-bindings: clock: fixed: Define a preferred node name
  clk: meson: s4: fix module autoloading
  clk: samsung: gs101: mark some apm UASC and XIU clocks critical
  clk: imx: imx8mp: Convert to platform remove callback returning void
  clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
  clk: bcm: rpi: Assign ->num before accessing ->hws
  clk: bcm: dvp: Assign ->num before accessing ->hws
  clk: samsung: gs101: add support for cmu_hsi2
  clk: samsung: gs101: add support for cmu_hsi0
  ...
2024-05-18 12:48:37 -07:00

529 lines
16 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_CLK_PREPARE
bool
config HAVE_LEGACY_CLK # TODO: Remove once all legacy users are migrated
bool
select HAVE_CLK
help
Select this option when the clock API in <linux/clk.h> is implemented
by platform/architecture code. This method is deprecated. Modern
code should select COMMON_CLK instead and not define a custom
'struct clk'.
menuconfig COMMON_CLK
bool "Common Clock Framework"
depends on !HAVE_LEGACY_CLK
select HAVE_CLK_PREPARE
select HAVE_CLK
select RATIONAL
help
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
implementation of the clock API in include/linux/clk.h.
Architectures utilizing the common struct clk should select
this option.
if COMMON_CLK
config COMMON_CLK_WM831X
tristate "Clock driver for WM831x/2x PMICs"
depends on MFD_WM831X
help
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microelectronics.
source "drivers/clk/versatile/Kconfig"
config CLK_HSDK
bool "PLL Driver for HSDK platform"
depends on ARC_SOC_HSDK || COMPILE_TEST
depends on HAS_IOMEM
help
This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
control.
config LMK04832
tristate "Ti LMK04832 JESD204B Compliant Clock Jitter Cleaner"
depends on SPI
select REGMAP_SPI
help
Say yes here to build support for Texas Instruments' LMK04832 Ultra
Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs
config COMMON_CLK_APPLE_NCO
tristate "Clock driver for Apple SoC NCOs"
depends on ARCH_APPLE || COMPILE_TEST
default ARCH_APPLE
help
This driver supports NCO (Numerically Controlled Oscillator) blocks
found on Apple SoCs such as t8103 (M1). The blocks are typically
generators of audio clocks.
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77620/77686/77802 MFD"
depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
help
This driver supports Maxim 77620/77686/77802 crystal oscillator
clock.
config COMMON_CLK_MAX9485
tristate "Maxim 9485 Programmable Clock Generator"
depends on I2C
help
This driver supports Maxim 9485 Programmable Audio Clock Generator
config COMMON_CLK_RK808
tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
depends on MFD_RK8XX
help
This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
Clkout1 is always on, Clkout2 can off by control register.
config COMMON_CLK_HI655X
tristate "Clock driver for Hi655x" if EXPERT
depends on (MFD_HI655X_PMIC || COMPILE_TEST)
select REGMAP
default MFD_HI655X_PMIC
help
This driver supports the hi655x PMIC clock. This
multi-function device has one fixed-rate oscillator, clocked
at 32KHz.
config COMMON_CLK_SCMI
tristate "Clock driver controlled via SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
help
This driver provides support for clocks that are controlled
by firmware that implements the SCMI interface.
This driver uses SCMI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SCPI
tristate "Clock driver controlled via SCPI interface"
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
help
This driver provides support for clocks that are controlled
by firmware that implements the SCPI interface.
This driver uses SCPI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SI5341
tristate "Clock driver for SiLabs 5341 and 5340 A/B/C/D devices"
depends on I2C
select REGMAP_I2C
help
This driver supports Silicon Labs Si5341 and Si5340 programmable clock
generators. Not all features of these chips are currently supported
by the driver, in particular it only supports XTAL input. The chip can
be pre-programmed to support other configurations and features not yet
implemented in the driver.
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
select REGMAP_I2C
help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
config COMMON_CLK_SI514
tristate "Clock driver for SiLabs 514 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Silicon Labs 514 programmable clock
generator.
config COMMON_CLK_SI544
tristate "Clock driver for SiLabs 544 devices"
depends on I2C
select REGMAP_I2C
help
This driver supports the Silicon Labs 544 programmable clock
generator.
config COMMON_CLK_SI570
tristate "Clock driver for SiLabs 570 and compatible devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
config COMMON_CLK_BM1880
bool "Clock driver for Bitmain BM1880 SoC"
depends on ARCH_BITMAIN || COMPILE_TEST
default ARCH_BITMAIN
help
This driver supports the clocks on Bitmain BM1880 SoC.
config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
select REGMAP_I2C
help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
config COMMON_CLK_TPS68470
tristate "Clock Driver for TI TPS68470 PMIC"
depends on I2C
depends on INTEL_SKL_INT3472 || COMPILE_TEST
select REGMAP_I2C
help
This driver supports the clocks provided by the TPS68470 PMIC.
config COMMON_CLK_CDCE925
tristate "Clock driver for TI CDCE913/925/937/949 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the TI CDCE913/925/937/949 programmable clock
synthesizer. Each chip has different number of PLLs and outputs.
For example, the CDCE925 contains two PLLs with spread-spectrum
clocking support and five output dividers. The driver only supports
the following setup, and uses a fixed setting for the output muxes.
Y1 is derived from the input clock
Y2 and Y3 derive from PLL1
Y4 and Y5 derive from PLL2
Given a target output frequency, the driver will set the PLL and
divider to best approximate the desired output.
config COMMON_CLK_CS2000_CP
tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
depends on I2C
select REGMAP_I2C
help
If you say yes here you get support for the CS2000 clock multiplier.
config COMMON_CLK_EN7523
bool "Clock driver for Airoha EN7523 SoC system clocks"
depends on OF
depends on ARCH_AIROHA || COMPILE_TEST
default ARCH_AIROHA
help
This driver provides the fixed clocks and gates present on Airoha
ARM silicon.
config COMMON_CLK_FSL_FLEXSPI
tristate "Clock driver for FlexSPI on Layerscape SoCs"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
default ARCH_LAYERSCAPE && SPI_NXP_FLEXSPI
help
On Layerscape SoCs there is a special clock for the FlexSPI
interface.
config COMMON_CLK_FSL_SAI
bool "Clock driver for BCLK of Freescale SAI cores"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
help
This driver supports the Freescale SAI (Synchronous Audio Interface)
to be used as a generic clock output. Some SoCs have restrictions
regarding the possible pin multiplexer settings. Eg. on some SoCs
two SAI interfaces can only be enabled together. If just one is
needed, the BCLK pin of the second one can be used as general
purpose clock output. Ideally, it can be used to drive an audio
codec (sometimes known as MCLK).
config COMMON_CLK_GEMINI
bool "Clock driver for Cortina Systems Gemini SoC"
depends on ARCH_GEMINI || COMPILE_TEST
select MFD_SYSCON
select RESET_CONTROLLER
help
This driver supports the SoC clocks on the Cortina Systems Gemini
platform, also known as SL3516 or CS3516.
config COMMON_CLK_LAN966X
tristate "Generic Clock Controller driver for LAN966X SoC"
depends on HAS_IOMEM
depends on OF
depends on SOC_LAN966 || COMPILE_TEST
help
This driver provides support for Generic Clock Controller(GCK) on
LAN966X SoC. GCK generates and supplies clock to various peripherals
within the SoC.
config COMMON_CLK_ASPEED
bool "Clock driver for Aspeed BMC SoCs"
depends on ARCH_ASPEED || COMPILE_TEST
default ARCH_ASPEED
select MFD_SYSCON
select RESET_CONTROLLER
help
This driver supports the SoC clocks on the Aspeed BMC platforms.
The G4 and G5 series, including the ast2400 and ast2500, are supported
by this driver.
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
clock. These multi-function devices have two (S2MPS14) or three
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
config CLK_TWL
tristate "Clock driver for the TWL PMIC family"
depends on TWL4030_CORE
help
Enable support for controlling the clock resources on TWL family
PMICs. These devices have some 32K clock outputs which can be
controlled by software. For now, only the TWL6032 clocks are
supported.
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
help
Enable the external functional clock support on OMAP4+ platforms for
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
config COMMON_CLK_AXI_CLKGEN
tristate "AXI clkgen driver"
depends on HAS_IOMEM || COMPILE_TEST
depends on OF
help
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on OF
depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
help
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
config CLK_LS1028A_PLLDIG
tristate "Clock driver for LS1028A Display output"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
default ARCH_LAYERSCAPE
help
This driver support the Display output interfaces(LCD, DPHY) pixel clocks
of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all
features of the PLL are currently supported by the driver. By default,
configured bypass mode with this PLL.
config COMMON_CLK_XGENE
bool "Clock driver for APM XGene SoC"
default ARCH_XGENE
depends on ARM64 || COMPILE_TEST
help
Support for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_LOCHNAGAR
tristate "Cirrus Logic Lochnagar clock driver"
depends on MFD_LOCHNAGAR
help
This driver supports the clocking features of the Cirrus Logic
Lochnagar audio development board.
config COMMON_CLK_LOONGSON2
bool "Clock driver for Loongson-2 SoC"
depends on LOONGARCH || COMPILE_TEST
help
This driver provides support for clock controller on Loongson-2 SoC.
The clock controller can generates and supplies clock to various
peripherals within the SoC.
Say Y here to support Loongson-2 SoC clock driver.
config COMMON_CLK_NXP
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
select MFD_SYSCON if ARCH_LPC18XX
help
Support for clock providers on NXP platforms.
config COMMON_CLK_PALMAS
tristate "Clock driver for TI Palmas devices"
depends on MFD_PALMAS
help
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
config COMMON_CLK_PWM
tristate "Clock driver for PWMs used as clock outputs"
depends on PWM
help
Adapter driver so that any PWM output can be (mis)used as clock signal
at 50% duty cycle.
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
help
Support for the Marvell PXA SoC.
config COMMON_CLK_RS9_PCIE
tristate "Clock driver for Renesas 9-series PCIe clock generators"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Renesas 9-series PCIe clock generator
models 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ.
config COMMON_CLK_SI521XX
tristate "Clock driver for SkyWorks Si521xx PCIe clock generators"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the SkyWorks Si521xx PCIe clock generator
models Si52144/Si52146/Si52147.
config COMMON_CLK_VC3
tristate "Clock driver for Renesas VersaClock 3 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Renesas VersaClock 3 programmable clock
generators.
config COMMON_CLK_VC5
tristate "Clock driver for IDT VersaClock 5,6 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the IDT VersaClock 5 and VersaClock 6
programmable clock generators.
config COMMON_CLK_VC7
tristate "Clock driver for Renesas Versaclock 7 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
Renesas Versaclock7 is a family of configurable clock generator
and jitter attenuator ICs with fractional and integer dividers.
config COMMON_CLK_STM32F
def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
help
Support for stm32f4 and stm32f7 SoC families clocks
config COMMON_CLK_STM32H7
def_bool COMMON_CLK && MACH_STM32H743
help
Support for stm32h7 SoC family clocks
config COMMON_CLK_MMP2
def_bool COMMON_CLK && (MACH_MMP2_DT || MACH_MMP3_DT)
help
Support for Marvell MMP2 and MMP3 SoC clocks
config COMMON_CLK_MMP2_AUDIO
tristate "Clock driver for MMP2 Audio subsystem"
depends on COMMON_CLK_MMP2 || COMPILE_TEST
help
This driver supports clocks for Audio subsystem on MMP2 SoC.
config COMMON_CLK_BD718XX
tristate "Clock driver for 32K clk gates on ROHM PMICs"
depends on MFD_ROHM_BD718XX || MFD_ROHM_BD71828
help
This driver supports ROHM BD71837, BD71847, BD71850, BD71815
and BD71828 PMICs clock gates.
config COMMON_CLK_FIXED_MMIO
bool "Clock driver for Memory Mapped Fixed values"
depends on COMMON_CLK && OF
depends on HAS_IOMEM
help
Support for Memory Mapped IO Fixed clocks
config COMMON_CLK_K210
bool "Clock driver for the Canaan Kendryte K210 SoC"
depends on OF && RISCV && SOC_CANAAN_K210
default SOC_CANAAN_K210
help
Support for the Canaan Kendryte K210 RISC-V SoC clocks.
config COMMON_CLK_SP7021
tristate "Clock driver for Sunplus SP7021 SoC"
depends on SOC_SP7021 || COMPILE_TEST
default SOC_SP7021
help
This driver supports the Sunplus SP7021 SoC clocks.
It implements SP7021 PLLs/gate.
Not all features of the PLL are currently supported
by the driver.
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/baikal-t1/Kconfig"
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/imx/Kconfig"
source "drivers/clk/ingenic/Kconfig"
source "drivers/clk/keystone/Kconfig"
source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mstar/Kconfig"
source "drivers/clk/microchip/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/nuvoton/Kconfig"
source "drivers/clk/pistachio/Kconfig"
source "drivers/clk/qcom/Kconfig"
source "drivers/clk/ralink/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
source "drivers/clk/sifive/Kconfig"
source "drivers/clk/socfpga/Kconfig"
source "drivers/clk/sophgo/Kconfig"
source "drivers/clk/sprd/Kconfig"
source "drivers/clk/starfive/Kconfig"
source "drivers/clk/sunxi/Kconfig"
source "drivers/clk/sunxi-ng/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/stm32/Kconfig"
source "drivers/clk/ti/Kconfig"
source "drivers/clk/uniphier/Kconfig"
source "drivers/clk/visconti/Kconfig"
source "drivers/clk/x86/Kconfig"
source "drivers/clk/xilinx/Kconfig"
source "drivers/clk/zynqmp/Kconfig"
# Kunit test cases
config CLK_KUNIT_TEST
tristate "Basic Clock Framework Kunit Tests" if !KUNIT_ALL_TESTS
depends on KUNIT
default KUNIT_ALL_TESTS
help
Kunit tests for the common clock framework.
config CLK_GATE_KUNIT_TEST
tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS
depends on KUNIT
default KUNIT_ALL_TESTS
help
Kunit test for the basic clk gate type.
config CLK_FD_KUNIT_TEST
tristate "Basic fractional divider type Kunit test" if !KUNIT_ALL_TESTS
depends on KUNIT
default KUNIT_ALL_TESTS
help
Kunit test for the clk-fractional-divider type.
endif