linux/arch/arm/mach-at91/include/mach/at91sam9_smc.h
Jean-Christophe PLAGNIOL-VILLARD 59594e13e4 ARM: at91: add accessor to manage SMC
SMC, Static Memory Controller will need more accessors to fine
configure its parameters.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-13 18:31:36 +01:00

101 lines
3.6 KiB
C

/*
* arch/arm/mach-at91/include/mach/at91sam9_smc.h
*
* Copyright (C) 2007 Andrew Victor
* Copyright (C) 2007 Atmel Corporation.
*
* Static Memory Controllers (SMC) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9_SMC_H
#define AT91SAM9_SMC_H
#include <mach/cpu.h>
#ifndef __ASSEMBLY__
struct sam9_smc_config {
/* Setup register */
u8 ncs_read_setup;
u8 nrd_setup;
u8 ncs_write_setup;
u8 nwe_setup;
/* Pulse register */
u8 ncs_read_pulse;
u8 nrd_pulse;
u8 ncs_write_pulse;
u8 nwe_pulse;
/* Cycle register */
u16 read_cycle;
u16 write_cycle;
/* Mode register */
u32 mode;
u8 tdf_cycles:4;
};
extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
#endif
#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */
#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */
#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */
#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
#define AT91_SMC_EXNWMODE_READY (3 << 4)
#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
#define AT91_SMC_BAT_SELECT (0 << 8)
#define AT91_SMC_BAT_WRITE (1 << 8)
#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
#define AT91_SMC_DBW_8 (0 << 12)
#define AT91_SMC_DBW_16 (1 << 12)
#define AT91_SMC_DBW_32 (2 << 12)
#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
#define AT91_SMC_TDF_(x) ((x) << 16)
#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
#define AT91_SMC_PS (3 << 28) /* Page Size */
#define AT91_SMC_PS_4 (0 << 28)
#define AT91_SMC_PS_8 (1 << 28)
#define AT91_SMC_PS_16 (2 << 28)
#define AT91_SMC_PS_32 (3 << 28)
#endif