linux/mm/slab_common.c
GONG, Ruiqi 3c61529405 Randomized slab caches for kmalloc()
When exploiting memory vulnerabilities, "heap spraying" is a common
technique targeting those related to dynamic memory allocation (i.e. the
"heap"), and it plays an important role in a successful exploitation.
Basically, it is to overwrite the memory area of vulnerable object by
triggering allocation in other subsystems or modules and therefore
getting a reference to the targeted memory location. It's usable on
various types of vulnerablity including use after free (UAF), heap out-
of-bound write and etc.

There are (at least) two reasons why the heap can be sprayed: 1) generic
slab caches are shared among different subsystems and modules, and
2) dedicated slab caches could be merged with the generic ones.
Currently these two factors cannot be prevented at a low cost: the first
one is a widely used memory allocation mechanism, and shutting down slab
merging completely via `slub_nomerge` would be overkill.

To efficiently prevent heap spraying, we propose the following approach:
to create multiple copies of generic slab caches that will never be
merged, and random one of them will be used at allocation. The random
selection is based on the address of code that calls `kmalloc()`, which
means it is static at runtime (rather than dynamically determined at
each time of allocation, which could be bypassed by repeatedly spraying
in brute force). In other words, the randomness of cache selection will
be with respect to the code address rather than time, i.e. allocations
in different code paths would most likely pick different caches,
although kmalloc() at each place would use the same cache copy whenever
it is executed. In this way, the vulnerable object and memory allocated
in other subsystems and modules will (most probably) be on different
slab caches, which prevents the object from being sprayed.

Meanwhile, the static random selection is further enhanced with a
per-boot random seed, which prevents the attacker from finding a usable
kmalloc that happens to pick the same cache with the vulnerable
subsystem/module by analyzing the open source code. In other words, with
the per-boot seed, the random selection is static during each time the
system starts and runs, but not across different system startups.

The overhead of performance has been tested on a 40-core x86 server by
comparing the results of `perf bench all` between the kernels with and
without this patch based on the latest linux-next kernel, which shows
minor difference. A subset of benchmarks are listed below:

                sched/  sched/  syscall/       mem/       mem/
             messaging    pipe     basic     memcpy     memset
                 (sec)   (sec)     (sec)   (GB/sec)   (GB/sec)

control1         0.019   5.459     0.733  15.258789  51.398026
control2         0.019   5.439     0.730  16.009221  48.828125
control3         0.019   5.282     0.735  16.009221  48.828125
control_avg      0.019   5.393     0.733  15.759077  49.684759

experiment1      0.019   5.374     0.741  15.500992  46.502976
experiment2      0.019   5.440     0.746  16.276042  51.398026
experiment3      0.019   5.242     0.752  15.258789  51.398026
experiment_avg   0.019   5.352     0.746  15.678608  49.766343

The overhead of memory usage was measured by executing `free` after boot
on a QEMU VM with 1GB total memory, and as expected, it's positively
correlated with # of cache copies:

           control  4 copies  8 copies  16 copies

total       969.8M    968.2M    968.2M     968.2M
used         20.0M     21.9M     24.1M      26.7M
free        936.9M    933.6M    931.4M     928.6M
available   932.2M    928.8M    926.6M     923.9M

Co-developed-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Dennis Zhou <dennis@kernel.org> # percpu
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-07-18 10:07:47 +02:00

1515 lines
40 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Slab allocator functions that are independent of the allocator strategy
*
* (C) 2012 Christoph Lameter <cl@linux.com>
*/
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/poison.h>
#include <linux/interrupt.h>
#include <linux/memory.h>
#include <linux/cache.h>
#include <linux/compiler.h>
#include <linux/kfence.h>
#include <linux/module.h>
#include <linux/cpu.h>
#include <linux/uaccess.h>
#include <linux/seq_file.h>
#include <linux/dma-mapping.h>
#include <linux/swiotlb.h>
#include <linux/proc_fs.h>
#include <linux/debugfs.h>
#include <linux/kasan.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
#include <linux/memcontrol.h>
#include <linux/stackdepot.h>
#include "internal.h"
#include "slab.h"
#define CREATE_TRACE_POINTS
#include <trace/events/kmem.h>
enum slab_state slab_state;
LIST_HEAD(slab_caches);
DEFINE_MUTEX(slab_mutex);
struct kmem_cache *kmem_cache;
static LIST_HEAD(slab_caches_to_rcu_destroy);
static void slab_caches_to_rcu_destroy_workfn(struct work_struct *work);
static DECLARE_WORK(slab_caches_to_rcu_destroy_work,
slab_caches_to_rcu_destroy_workfn);
/*
* Set of flags that will prevent slab merging
*/
#define SLAB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
SLAB_TRACE | SLAB_TYPESAFE_BY_RCU | SLAB_NOLEAKTRACE | \
SLAB_FAILSLAB | SLAB_NO_MERGE | kasan_never_merge())
#define SLAB_MERGE_SAME (SLAB_RECLAIM_ACCOUNT | SLAB_CACHE_DMA | \
SLAB_CACHE_DMA32 | SLAB_ACCOUNT)
/*
* Merge control. If this is set then no merging of slab caches will occur.
*/
static bool slab_nomerge = !IS_ENABLED(CONFIG_SLAB_MERGE_DEFAULT);
static int __init setup_slab_nomerge(char *str)
{
slab_nomerge = true;
return 1;
}
static int __init setup_slab_merge(char *str)
{
slab_nomerge = false;
return 1;
}
#ifdef CONFIG_SLUB
__setup_param("slub_nomerge", slub_nomerge, setup_slab_nomerge, 0);
__setup_param("slub_merge", slub_merge, setup_slab_merge, 0);
#endif
__setup("slab_nomerge", setup_slab_nomerge);
__setup("slab_merge", setup_slab_merge);
/*
* Determine the size of a slab object
*/
unsigned int kmem_cache_size(struct kmem_cache *s)
{
return s->object_size;
}
EXPORT_SYMBOL(kmem_cache_size);
#ifdef CONFIG_DEBUG_VM
static int kmem_cache_sanity_check(const char *name, unsigned int size)
{
if (!name || in_interrupt() || size > KMALLOC_MAX_SIZE) {
pr_err("kmem_cache_create(%s) integrity check failed\n", name);
return -EINVAL;
}
WARN_ON(strchr(name, ' ')); /* It confuses parsers */
return 0;
}
#else
static inline int kmem_cache_sanity_check(const char *name, unsigned int size)
{
return 0;
}
#endif
/*
* Figure out what the alignment of the objects will be given a set of
* flags, a user specified alignment and the size of the objects.
*/
static unsigned int calculate_alignment(slab_flags_t flags,
unsigned int align, unsigned int size)
{
/*
* If the user wants hardware cache aligned objects then follow that
* suggestion if the object is sufficiently large.
*
* The hardware cache alignment cannot override the specified
* alignment though. If that is greater then use it.
*/
if (flags & SLAB_HWCACHE_ALIGN) {
unsigned int ralign;
ralign = cache_line_size();
while (size <= ralign / 2)
ralign /= 2;
align = max(align, ralign);
}
align = max(align, arch_slab_minalign());
return ALIGN(align, sizeof(void *));
}
/*
* Find a mergeable slab cache
*/
int slab_unmergeable(struct kmem_cache *s)
{
if (slab_nomerge || (s->flags & SLAB_NEVER_MERGE))
return 1;
if (s->ctor)
return 1;
#ifdef CONFIG_HARDENED_USERCOPY
if (s->usersize)
return 1;
#endif
/*
* We may have set a slab to be unmergeable during bootstrap.
*/
if (s->refcount < 0)
return 1;
return 0;
}
struct kmem_cache *find_mergeable(unsigned int size, unsigned int align,
slab_flags_t flags, const char *name, void (*ctor)(void *))
{
struct kmem_cache *s;
if (slab_nomerge)
return NULL;
if (ctor)
return NULL;
size = ALIGN(size, sizeof(void *));
align = calculate_alignment(flags, align, size);
size = ALIGN(size, align);
flags = kmem_cache_flags(size, flags, name);
if (flags & SLAB_NEVER_MERGE)
return NULL;
list_for_each_entry_reverse(s, &slab_caches, list) {
if (slab_unmergeable(s))
continue;
if (size > s->size)
continue;
if ((flags & SLAB_MERGE_SAME) != (s->flags & SLAB_MERGE_SAME))
continue;
/*
* Check if alignment is compatible.
* Courtesy of Adrian Drzewiecki
*/
if ((s->size & ~(align - 1)) != s->size)
continue;
if (s->size - size >= sizeof(void *))
continue;
if (IS_ENABLED(CONFIG_SLAB) && align &&
(align > s->align || s->align % align))
continue;
return s;
}
return NULL;
}
static struct kmem_cache *create_cache(const char *name,
unsigned int object_size, unsigned int align,
slab_flags_t flags, unsigned int useroffset,
unsigned int usersize, void (*ctor)(void *),
struct kmem_cache *root_cache)
{
struct kmem_cache *s;
int err;
if (WARN_ON(useroffset + usersize > object_size))
useroffset = usersize = 0;
err = -ENOMEM;
s = kmem_cache_zalloc(kmem_cache, GFP_KERNEL);
if (!s)
goto out;
s->name = name;
s->size = s->object_size = object_size;
s->align = align;
s->ctor = ctor;
#ifdef CONFIG_HARDENED_USERCOPY
s->useroffset = useroffset;
s->usersize = usersize;
#endif
err = __kmem_cache_create(s, flags);
if (err)
goto out_free_cache;
s->refcount = 1;
list_add(&s->list, &slab_caches);
return s;
out_free_cache:
kmem_cache_free(kmem_cache, s);
out:
return ERR_PTR(err);
}
/**
* kmem_cache_create_usercopy - Create a cache with a region suitable
* for copying to userspace
* @name: A string which is used in /proc/slabinfo to identify this cache.
* @size: The size of objects to be created in this cache.
* @align: The required alignment for the objects.
* @flags: SLAB flags
* @useroffset: Usercopy region offset
* @usersize: Usercopy region size
* @ctor: A constructor for the objects.
*
* Cannot be called within a interrupt, but can be interrupted.
* The @ctor is run when new pages are allocated by the cache.
*
* The flags are
*
* %SLAB_POISON - Poison the slab with a known test pattern (a5a5a5a5)
* to catch references to uninitialised memory.
*
* %SLAB_RED_ZONE - Insert `Red` zones around the allocated memory to check
* for buffer overruns.
*
* %SLAB_HWCACHE_ALIGN - Align the objects in this cache to a hardware
* cacheline. This can be beneficial if you're counting cycles as closely
* as davem.
*
* Return: a pointer to the cache on success, NULL on failure.
*/
struct kmem_cache *
kmem_cache_create_usercopy(const char *name,
unsigned int size, unsigned int align,
slab_flags_t flags,
unsigned int useroffset, unsigned int usersize,
void (*ctor)(void *))
{
struct kmem_cache *s = NULL;
const char *cache_name;
int err;
#ifdef CONFIG_SLUB_DEBUG
/*
* If no slub_debug was enabled globally, the static key is not yet
* enabled by setup_slub_debug(). Enable it if the cache is being
* created with any of the debugging flags passed explicitly.
* It's also possible that this is the first cache created with
* SLAB_STORE_USER and we should init stack_depot for it.
*/
if (flags & SLAB_DEBUG_FLAGS)
static_branch_enable(&slub_debug_enabled);
if (flags & SLAB_STORE_USER)
stack_depot_init();
#endif
mutex_lock(&slab_mutex);
err = kmem_cache_sanity_check(name, size);
if (err) {
goto out_unlock;
}
/* Refuse requests with allocator specific flags */
if (flags & ~SLAB_FLAGS_PERMITTED) {
err = -EINVAL;
goto out_unlock;
}
/*
* Some allocators will constraint the set of valid flags to a subset
* of all flags. We expect them to define CACHE_CREATE_MASK in this
* case, and we'll just provide them with a sanitized version of the
* passed flags.
*/
flags &= CACHE_CREATE_MASK;
/* Fail closed on bad usersize of useroffset values. */
if (!IS_ENABLED(CONFIG_HARDENED_USERCOPY) ||
WARN_ON(!usersize && useroffset) ||
WARN_ON(size < usersize || size - usersize < useroffset))
usersize = useroffset = 0;
if (!usersize)
s = __kmem_cache_alias(name, size, align, flags, ctor);
if (s)
goto out_unlock;
cache_name = kstrdup_const(name, GFP_KERNEL);
if (!cache_name) {
err = -ENOMEM;
goto out_unlock;
}
s = create_cache(cache_name, size,
calculate_alignment(flags, align, size),
flags, useroffset, usersize, ctor, NULL);
if (IS_ERR(s)) {
err = PTR_ERR(s);
kfree_const(cache_name);
}
out_unlock:
mutex_unlock(&slab_mutex);
if (err) {
if (flags & SLAB_PANIC)
panic("%s: Failed to create slab '%s'. Error %d\n",
__func__, name, err);
else {
pr_warn("%s(%s) failed with error %d\n",
__func__, name, err);
dump_stack();
}
return NULL;
}
return s;
}
EXPORT_SYMBOL(kmem_cache_create_usercopy);
/**
* kmem_cache_create - Create a cache.
* @name: A string which is used in /proc/slabinfo to identify this cache.
* @size: The size of objects to be created in this cache.
* @align: The required alignment for the objects.
* @flags: SLAB flags
* @ctor: A constructor for the objects.
*
* Cannot be called within a interrupt, but can be interrupted.
* The @ctor is run when new pages are allocated by the cache.
*
* The flags are
*
* %SLAB_POISON - Poison the slab with a known test pattern (a5a5a5a5)
* to catch references to uninitialised memory.
*
* %SLAB_RED_ZONE - Insert `Red` zones around the allocated memory to check
* for buffer overruns.
*
* %SLAB_HWCACHE_ALIGN - Align the objects in this cache to a hardware
* cacheline. This can be beneficial if you're counting cycles as closely
* as davem.
*
* Return: a pointer to the cache on success, NULL on failure.
*/
struct kmem_cache *
kmem_cache_create(const char *name, unsigned int size, unsigned int align,
slab_flags_t flags, void (*ctor)(void *))
{
return kmem_cache_create_usercopy(name, size, align, flags, 0, 0,
ctor);
}
EXPORT_SYMBOL(kmem_cache_create);
#ifdef SLAB_SUPPORTS_SYSFS
/*
* For a given kmem_cache, kmem_cache_destroy() should only be called
* once or there will be a use-after-free problem. The actual deletion
* and release of the kobject does not need slab_mutex or cpu_hotplug_lock
* protection. So they are now done without holding those locks.
*
* Note that there will be a slight delay in the deletion of sysfs files
* if kmem_cache_release() is called indrectly from a work function.
*/
static void kmem_cache_release(struct kmem_cache *s)
{
sysfs_slab_unlink(s);
sysfs_slab_release(s);
}
#else
static void kmem_cache_release(struct kmem_cache *s)
{
slab_kmem_cache_release(s);
}
#endif
static void slab_caches_to_rcu_destroy_workfn(struct work_struct *work)
{
LIST_HEAD(to_destroy);
struct kmem_cache *s, *s2;
/*
* On destruction, SLAB_TYPESAFE_BY_RCU kmem_caches are put on the
* @slab_caches_to_rcu_destroy list. The slab pages are freed
* through RCU and the associated kmem_cache are dereferenced
* while freeing the pages, so the kmem_caches should be freed only
* after the pending RCU operations are finished. As rcu_barrier()
* is a pretty slow operation, we batch all pending destructions
* asynchronously.
*/
mutex_lock(&slab_mutex);
list_splice_init(&slab_caches_to_rcu_destroy, &to_destroy);
mutex_unlock(&slab_mutex);
if (list_empty(&to_destroy))
return;
rcu_barrier();
list_for_each_entry_safe(s, s2, &to_destroy, list) {
debugfs_slab_release(s);
kfence_shutdown_cache(s);
kmem_cache_release(s);
}
}
static int shutdown_cache(struct kmem_cache *s)
{
/* free asan quarantined objects */
kasan_cache_shutdown(s);
if (__kmem_cache_shutdown(s) != 0)
return -EBUSY;
list_del(&s->list);
if (s->flags & SLAB_TYPESAFE_BY_RCU) {
list_add_tail(&s->list, &slab_caches_to_rcu_destroy);
schedule_work(&slab_caches_to_rcu_destroy_work);
} else {
kfence_shutdown_cache(s);
debugfs_slab_release(s);
}
return 0;
}
void slab_kmem_cache_release(struct kmem_cache *s)
{
__kmem_cache_release(s);
kfree_const(s->name);
kmem_cache_free(kmem_cache, s);
}
void kmem_cache_destroy(struct kmem_cache *s)
{
int refcnt;
bool rcu_set;
if (unlikely(!s) || !kasan_check_byte(s))
return;
cpus_read_lock();
mutex_lock(&slab_mutex);
rcu_set = s->flags & SLAB_TYPESAFE_BY_RCU;
refcnt = --s->refcount;
if (refcnt)
goto out_unlock;
WARN(shutdown_cache(s),
"%s %s: Slab cache still has objects when called from %pS",
__func__, s->name, (void *)_RET_IP_);
out_unlock:
mutex_unlock(&slab_mutex);
cpus_read_unlock();
if (!refcnt && !rcu_set)
kmem_cache_release(s);
}
EXPORT_SYMBOL(kmem_cache_destroy);
/**
* kmem_cache_shrink - Shrink a cache.
* @cachep: The cache to shrink.
*
* Releases as many slabs as possible for a cache.
* To help debugging, a zero exit status indicates all slabs were released.
*
* Return: %0 if all slabs were released, non-zero otherwise
*/
int kmem_cache_shrink(struct kmem_cache *cachep)
{
kasan_cache_shrink(cachep);
return __kmem_cache_shrink(cachep);
}
EXPORT_SYMBOL(kmem_cache_shrink);
bool slab_is_available(void)
{
return slab_state >= UP;
}
#ifdef CONFIG_PRINTK
/**
* kmem_valid_obj - does the pointer reference a valid slab object?
* @object: pointer to query.
*
* Return: %true if the pointer is to a not-yet-freed object from
* kmalloc() or kmem_cache_alloc(), either %true or %false if the pointer
* is to an already-freed object, and %false otherwise.
*/
bool kmem_valid_obj(void *object)
{
struct folio *folio;
/* Some arches consider ZERO_SIZE_PTR to be a valid address. */
if (object < (void *)PAGE_SIZE || !virt_addr_valid(object))
return false;
folio = virt_to_folio(object);
return folio_test_slab(folio);
}
EXPORT_SYMBOL_GPL(kmem_valid_obj);
static void kmem_obj_info(struct kmem_obj_info *kpp, void *object, struct slab *slab)
{
if (__kfence_obj_info(kpp, object, slab))
return;
__kmem_obj_info(kpp, object, slab);
}
/**
* kmem_dump_obj - Print available slab provenance information
* @object: slab object for which to find provenance information.
*
* This function uses pr_cont(), so that the caller is expected to have
* printed out whatever preamble is appropriate. The provenance information
* depends on the type of object and on how much debugging is enabled.
* For a slab-cache object, the fact that it is a slab object is printed,
* and, if available, the slab name, return address, and stack trace from
* the allocation and last free path of that object.
*
* This function will splat if passed a pointer to a non-slab object.
* If you are not sure what type of object you have, you should instead
* use mem_dump_obj().
*/
void kmem_dump_obj(void *object)
{
char *cp = IS_ENABLED(CONFIG_MMU) ? "" : "/vmalloc";
int i;
struct slab *slab;
unsigned long ptroffset;
struct kmem_obj_info kp = { };
if (WARN_ON_ONCE(!virt_addr_valid(object)))
return;
slab = virt_to_slab(object);
if (WARN_ON_ONCE(!slab)) {
pr_cont(" non-slab memory.\n");
return;
}
kmem_obj_info(&kp, object, slab);
if (kp.kp_slab_cache)
pr_cont(" slab%s %s", cp, kp.kp_slab_cache->name);
else
pr_cont(" slab%s", cp);
if (is_kfence_address(object))
pr_cont(" (kfence)");
if (kp.kp_objp)
pr_cont(" start %px", kp.kp_objp);
if (kp.kp_data_offset)
pr_cont(" data offset %lu", kp.kp_data_offset);
if (kp.kp_objp) {
ptroffset = ((char *)object - (char *)kp.kp_objp) - kp.kp_data_offset;
pr_cont(" pointer offset %lu", ptroffset);
}
if (kp.kp_slab_cache && kp.kp_slab_cache->object_size)
pr_cont(" size %u", kp.kp_slab_cache->object_size);
if (kp.kp_ret)
pr_cont(" allocated at %pS\n", kp.kp_ret);
else
pr_cont("\n");
for (i = 0; i < ARRAY_SIZE(kp.kp_stack); i++) {
if (!kp.kp_stack[i])
break;
pr_info(" %pS\n", kp.kp_stack[i]);
}
if (kp.kp_free_stack[0])
pr_cont(" Free path:\n");
for (i = 0; i < ARRAY_SIZE(kp.kp_free_stack); i++) {
if (!kp.kp_free_stack[i])
break;
pr_info(" %pS\n", kp.kp_free_stack[i]);
}
}
EXPORT_SYMBOL_GPL(kmem_dump_obj);
#endif
/* Create a cache during boot when no slab services are available yet */
void __init create_boot_cache(struct kmem_cache *s, const char *name,
unsigned int size, slab_flags_t flags,
unsigned int useroffset, unsigned int usersize)
{
int err;
unsigned int align = ARCH_KMALLOC_MINALIGN;
s->name = name;
s->size = s->object_size = size;
/*
* For power of two sizes, guarantee natural alignment for kmalloc
* caches, regardless of SL*B debugging options.
*/
if (is_power_of_2(size))
align = max(align, size);
s->align = calculate_alignment(flags, align, size);
#ifdef CONFIG_HARDENED_USERCOPY
s->useroffset = useroffset;
s->usersize = usersize;
#endif
err = __kmem_cache_create(s, flags);
if (err)
panic("Creation of kmalloc slab %s size=%u failed. Reason %d\n",
name, size, err);
s->refcount = -1; /* Exempt from merging for now */
}
static struct kmem_cache *__init create_kmalloc_cache(const char *name,
unsigned int size,
slab_flags_t flags)
{
struct kmem_cache *s = kmem_cache_zalloc(kmem_cache, GFP_NOWAIT);
if (!s)
panic("Out of memory when creating slab %s\n", name);
create_boot_cache(s, name, size, flags | SLAB_KMALLOC, 0, size);
list_add(&s->list, &slab_caches);
s->refcount = 1;
return s;
}
struct kmem_cache *
kmalloc_caches[NR_KMALLOC_TYPES][KMALLOC_SHIFT_HIGH + 1] __ro_after_init =
{ /* initialization for https://bugs.llvm.org/show_bug.cgi?id=42570 */ };
EXPORT_SYMBOL(kmalloc_caches);
#ifdef CONFIG_RANDOM_KMALLOC_CACHES
unsigned long random_kmalloc_seed __ro_after_init;
EXPORT_SYMBOL(random_kmalloc_seed);
#endif
/*
* Conversion table for small slabs sizes / 8 to the index in the
* kmalloc array. This is necessary for slabs < 192 since we have non power
* of two cache sizes there. The size of larger slabs can be determined using
* fls.
*/
static u8 size_index[24] __ro_after_init = {
3, /* 8 */
4, /* 16 */
5, /* 24 */
5, /* 32 */
6, /* 40 */
6, /* 48 */
6, /* 56 */
6, /* 64 */
1, /* 72 */
1, /* 80 */
1, /* 88 */
1, /* 96 */
7, /* 104 */
7, /* 112 */
7, /* 120 */
7, /* 128 */
2, /* 136 */
2, /* 144 */
2, /* 152 */
2, /* 160 */
2, /* 168 */
2, /* 176 */
2, /* 184 */
2 /* 192 */
};
static inline unsigned int size_index_elem(unsigned int bytes)
{
return (bytes - 1) / 8;
}
/*
* Find the kmem_cache structure that serves a given size of
* allocation
*/
struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags, unsigned long caller)
{
unsigned int index;
if (size <= 192) {
if (!size)
return ZERO_SIZE_PTR;
index = size_index[size_index_elem(size)];
} else {
if (WARN_ON_ONCE(size > KMALLOC_MAX_CACHE_SIZE))
return NULL;
index = fls(size - 1);
}
return kmalloc_caches[kmalloc_type(flags, caller)][index];
}
size_t kmalloc_size_roundup(size_t size)
{
struct kmem_cache *c;
/* Short-circuit the 0 size case. */
if (unlikely(size == 0))
return 0;
/* Short-circuit saturated "too-large" case. */
if (unlikely(size == SIZE_MAX))
return SIZE_MAX;
/* Above the smaller buckets, size is a multiple of page size. */
if (size > KMALLOC_MAX_CACHE_SIZE)
return PAGE_SIZE << get_order(size);
/*
* The flags don't matter since size_index is common to all.
* Neither does the caller for just getting ->object_size.
*/
c = kmalloc_slab(size, GFP_KERNEL, 0);
return c ? c->object_size : 0;
}
EXPORT_SYMBOL(kmalloc_size_roundup);
#ifdef CONFIG_ZONE_DMA
#define KMALLOC_DMA_NAME(sz) .name[KMALLOC_DMA] = "dma-kmalloc-" #sz,
#else
#define KMALLOC_DMA_NAME(sz)
#endif
#ifdef CONFIG_MEMCG_KMEM
#define KMALLOC_CGROUP_NAME(sz) .name[KMALLOC_CGROUP] = "kmalloc-cg-" #sz,
#else
#define KMALLOC_CGROUP_NAME(sz)
#endif
#ifndef CONFIG_SLUB_TINY
#define KMALLOC_RCL_NAME(sz) .name[KMALLOC_RECLAIM] = "kmalloc-rcl-" #sz,
#else
#define KMALLOC_RCL_NAME(sz)
#endif
#ifdef CONFIG_RANDOM_KMALLOC_CACHES
#define __KMALLOC_RANDOM_CONCAT(a, b) a ## b
#define KMALLOC_RANDOM_NAME(N, sz) __KMALLOC_RANDOM_CONCAT(KMA_RAND_, N)(sz)
#define KMA_RAND_1(sz) .name[KMALLOC_RANDOM_START + 1] = "kmalloc-rnd-01-" #sz,
#define KMA_RAND_2(sz) KMA_RAND_1(sz) .name[KMALLOC_RANDOM_START + 2] = "kmalloc-rnd-02-" #sz,
#define KMA_RAND_3(sz) KMA_RAND_2(sz) .name[KMALLOC_RANDOM_START + 3] = "kmalloc-rnd-03-" #sz,
#define KMA_RAND_4(sz) KMA_RAND_3(sz) .name[KMALLOC_RANDOM_START + 4] = "kmalloc-rnd-04-" #sz,
#define KMA_RAND_5(sz) KMA_RAND_4(sz) .name[KMALLOC_RANDOM_START + 5] = "kmalloc-rnd-05-" #sz,
#define KMA_RAND_6(sz) KMA_RAND_5(sz) .name[KMALLOC_RANDOM_START + 6] = "kmalloc-rnd-06-" #sz,
#define KMA_RAND_7(sz) KMA_RAND_6(sz) .name[KMALLOC_RANDOM_START + 7] = "kmalloc-rnd-07-" #sz,
#define KMA_RAND_8(sz) KMA_RAND_7(sz) .name[KMALLOC_RANDOM_START + 8] = "kmalloc-rnd-08-" #sz,
#define KMA_RAND_9(sz) KMA_RAND_8(sz) .name[KMALLOC_RANDOM_START + 9] = "kmalloc-rnd-09-" #sz,
#define KMA_RAND_10(sz) KMA_RAND_9(sz) .name[KMALLOC_RANDOM_START + 10] = "kmalloc-rnd-10-" #sz,
#define KMA_RAND_11(sz) KMA_RAND_10(sz) .name[KMALLOC_RANDOM_START + 11] = "kmalloc-rnd-11-" #sz,
#define KMA_RAND_12(sz) KMA_RAND_11(sz) .name[KMALLOC_RANDOM_START + 12] = "kmalloc-rnd-12-" #sz,
#define KMA_RAND_13(sz) KMA_RAND_12(sz) .name[KMALLOC_RANDOM_START + 13] = "kmalloc-rnd-13-" #sz,
#define KMA_RAND_14(sz) KMA_RAND_13(sz) .name[KMALLOC_RANDOM_START + 14] = "kmalloc-rnd-14-" #sz,
#define KMA_RAND_15(sz) KMA_RAND_14(sz) .name[KMALLOC_RANDOM_START + 15] = "kmalloc-rnd-15-" #sz,
#else // CONFIG_RANDOM_KMALLOC_CACHES
#define KMALLOC_RANDOM_NAME(N, sz)
#endif
#define INIT_KMALLOC_INFO(__size, __short_size) \
{ \
.name[KMALLOC_NORMAL] = "kmalloc-" #__short_size, \
KMALLOC_RCL_NAME(__short_size) \
KMALLOC_CGROUP_NAME(__short_size) \
KMALLOC_DMA_NAME(__short_size) \
KMALLOC_RANDOM_NAME(RANDOM_KMALLOC_CACHES_NR, __short_size) \
.size = __size, \
}
/*
* kmalloc_info[] is to make slub_debug=,kmalloc-xx option work at boot time.
* kmalloc_index() supports up to 2^21=2MB, so the final entry of the table is
* kmalloc-2M.
*/
const struct kmalloc_info_struct kmalloc_info[] __initconst = {
INIT_KMALLOC_INFO(0, 0),
INIT_KMALLOC_INFO(96, 96),
INIT_KMALLOC_INFO(192, 192),
INIT_KMALLOC_INFO(8, 8),
INIT_KMALLOC_INFO(16, 16),
INIT_KMALLOC_INFO(32, 32),
INIT_KMALLOC_INFO(64, 64),
INIT_KMALLOC_INFO(128, 128),
INIT_KMALLOC_INFO(256, 256),
INIT_KMALLOC_INFO(512, 512),
INIT_KMALLOC_INFO(1024, 1k),
INIT_KMALLOC_INFO(2048, 2k),
INIT_KMALLOC_INFO(4096, 4k),
INIT_KMALLOC_INFO(8192, 8k),
INIT_KMALLOC_INFO(16384, 16k),
INIT_KMALLOC_INFO(32768, 32k),
INIT_KMALLOC_INFO(65536, 64k),
INIT_KMALLOC_INFO(131072, 128k),
INIT_KMALLOC_INFO(262144, 256k),
INIT_KMALLOC_INFO(524288, 512k),
INIT_KMALLOC_INFO(1048576, 1M),
INIT_KMALLOC_INFO(2097152, 2M)
};
/*
* Patch up the size_index table if we have strange large alignment
* requirements for the kmalloc array. This is only the case for
* MIPS it seems. The standard arches will not generate any code here.
*
* Largest permitted alignment is 256 bytes due to the way we
* handle the index determination for the smaller caches.
*
* Make sure that nothing crazy happens if someone starts tinkering
* around with ARCH_KMALLOC_MINALIGN
*/
void __init setup_kmalloc_cache_index_table(void)
{
unsigned int i;
BUILD_BUG_ON(KMALLOC_MIN_SIZE > 256 ||
!is_power_of_2(KMALLOC_MIN_SIZE));
for (i = 8; i < KMALLOC_MIN_SIZE; i += 8) {
unsigned int elem = size_index_elem(i);
if (elem >= ARRAY_SIZE(size_index))
break;
size_index[elem] = KMALLOC_SHIFT_LOW;
}
if (KMALLOC_MIN_SIZE >= 64) {
/*
* The 96 byte sized cache is not used if the alignment
* is 64 byte.
*/
for (i = 64 + 8; i <= 96; i += 8)
size_index[size_index_elem(i)] = 7;
}
if (KMALLOC_MIN_SIZE >= 128) {
/*
* The 192 byte sized cache is not used if the alignment
* is 128 byte. Redirect kmalloc to use the 256 byte cache
* instead.
*/
for (i = 128 + 8; i <= 192; i += 8)
size_index[size_index_elem(i)] = 8;
}
}
static unsigned int __kmalloc_minalign(void)
{
#ifdef CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC
if (io_tlb_default_mem.nslabs)
return ARCH_KMALLOC_MINALIGN;
#endif
return dma_get_cache_alignment();
}
void __init
new_kmalloc_cache(int idx, enum kmalloc_cache_type type, slab_flags_t flags)
{
unsigned int minalign = __kmalloc_minalign();
unsigned int aligned_size = kmalloc_info[idx].size;
int aligned_idx = idx;
if ((KMALLOC_RECLAIM != KMALLOC_NORMAL) && (type == KMALLOC_RECLAIM)) {
flags |= SLAB_RECLAIM_ACCOUNT;
} else if (IS_ENABLED(CONFIG_MEMCG_KMEM) && (type == KMALLOC_CGROUP)) {
if (mem_cgroup_kmem_disabled()) {
kmalloc_caches[type][idx] = kmalloc_caches[KMALLOC_NORMAL][idx];
return;
}
flags |= SLAB_ACCOUNT;
} else if (IS_ENABLED(CONFIG_ZONE_DMA) && (type == KMALLOC_DMA)) {
flags |= SLAB_CACHE_DMA;
}
#ifdef CONFIG_RANDOM_KMALLOC_CACHES
if (type >= KMALLOC_RANDOM_START && type <= KMALLOC_RANDOM_END)
flags |= SLAB_NO_MERGE;
#endif
/*
* If CONFIG_MEMCG_KMEM is enabled, disable cache merging for
* KMALLOC_NORMAL caches.
*/
if (IS_ENABLED(CONFIG_MEMCG_KMEM) && (type == KMALLOC_NORMAL))
flags |= SLAB_NO_MERGE;
if (minalign > ARCH_KMALLOC_MINALIGN) {
aligned_size = ALIGN(aligned_size, minalign);
aligned_idx = __kmalloc_index(aligned_size, false);
}
if (!kmalloc_caches[type][aligned_idx])
kmalloc_caches[type][aligned_idx] = create_kmalloc_cache(
kmalloc_info[aligned_idx].name[type],
aligned_size, flags);
if (idx != aligned_idx)
kmalloc_caches[type][idx] = kmalloc_caches[type][aligned_idx];
}
/*
* Create the kmalloc array. Some of the regular kmalloc arrays
* may already have been created because they were needed to
* enable allocations for slab creation.
*/
void __init create_kmalloc_caches(slab_flags_t flags)
{
int i;
enum kmalloc_cache_type type;
/*
* Including KMALLOC_CGROUP if CONFIG_MEMCG_KMEM defined
*/
for (type = KMALLOC_NORMAL; type < NR_KMALLOC_TYPES; type++) {
for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++) {
if (!kmalloc_caches[type][i])
new_kmalloc_cache(i, type, flags);
/*
* Caches that are not of the two-to-the-power-of size.
* These have to be created immediately after the
* earlier power of two caches
*/
if (KMALLOC_MIN_SIZE <= 32 && i == 6 &&
!kmalloc_caches[type][1])
new_kmalloc_cache(1, type, flags);
if (KMALLOC_MIN_SIZE <= 64 && i == 7 &&
!kmalloc_caches[type][2])
new_kmalloc_cache(2, type, flags);
}
}
#ifdef CONFIG_RANDOM_KMALLOC_CACHES
random_kmalloc_seed = get_random_u64();
#endif
/* Kmalloc array is now usable */
slab_state = UP;
}
void free_large_kmalloc(struct folio *folio, void *object)
{
unsigned int order = folio_order(folio);
if (WARN_ON_ONCE(order == 0))
pr_warn_once("object pointer: 0x%p\n", object);
kmemleak_free(object);
kasan_kfree_large(object);
kmsan_kfree_large(object);
mod_lruvec_page_state(folio_page(folio, 0), NR_SLAB_UNRECLAIMABLE_B,
-(PAGE_SIZE << order));
__free_pages(folio_page(folio, 0), order);
}
static void *__kmalloc_large_node(size_t size, gfp_t flags, int node);
static __always_inline
void *__do_kmalloc_node(size_t size, gfp_t flags, int node, unsigned long caller)
{
struct kmem_cache *s;
void *ret;
if (unlikely(size > KMALLOC_MAX_CACHE_SIZE)) {
ret = __kmalloc_large_node(size, flags, node);
trace_kmalloc(caller, ret, size,
PAGE_SIZE << get_order(size), flags, node);
return ret;
}
s = kmalloc_slab(size, flags, caller);
if (unlikely(ZERO_OR_NULL_PTR(s)))
return s;
ret = __kmem_cache_alloc_node(s, flags, node, size, caller);
ret = kasan_kmalloc(s, ret, size, flags);
trace_kmalloc(caller, ret, size, s->size, flags, node);
return ret;
}
void *__kmalloc_node(size_t size, gfp_t flags, int node)
{
return __do_kmalloc_node(size, flags, node, _RET_IP_);
}
EXPORT_SYMBOL(__kmalloc_node);
void *__kmalloc(size_t size, gfp_t flags)
{
return __do_kmalloc_node(size, flags, NUMA_NO_NODE, _RET_IP_);
}
EXPORT_SYMBOL(__kmalloc);
void *__kmalloc_node_track_caller(size_t size, gfp_t flags,
int node, unsigned long caller)
{
return __do_kmalloc_node(size, flags, node, caller);
}
EXPORT_SYMBOL(__kmalloc_node_track_caller);
/**
* kfree - free previously allocated memory
* @object: pointer returned by kmalloc() or kmem_cache_alloc()
*
* If @object is NULL, no operation is performed.
*/
void kfree(const void *object)
{
struct folio *folio;
struct slab *slab;
struct kmem_cache *s;
trace_kfree(_RET_IP_, object);
if (unlikely(ZERO_OR_NULL_PTR(object)))
return;
folio = virt_to_folio(object);
if (unlikely(!folio_test_slab(folio))) {
free_large_kmalloc(folio, (void *)object);
return;
}
slab = folio_slab(folio);
s = slab->slab_cache;
__kmem_cache_free(s, (void *)object, _RET_IP_);
}
EXPORT_SYMBOL(kfree);
/**
* __ksize -- Report full size of underlying allocation
* @object: pointer to the object
*
* This should only be used internally to query the true size of allocations.
* It is not meant to be a way to discover the usable size of an allocation
* after the fact. Instead, use kmalloc_size_roundup(). Using memory beyond
* the originally requested allocation size may trigger KASAN, UBSAN_BOUNDS,
* and/or FORTIFY_SOURCE.
*
* Return: size of the actual memory used by @object in bytes
*/
size_t __ksize(const void *object)
{
struct folio *folio;
if (unlikely(object == ZERO_SIZE_PTR))
return 0;
folio = virt_to_folio(object);
if (unlikely(!folio_test_slab(folio))) {
if (WARN_ON(folio_size(folio) <= KMALLOC_MAX_CACHE_SIZE))
return 0;
if (WARN_ON(object != folio_address(folio)))
return 0;
return folio_size(folio);
}
#ifdef CONFIG_SLUB_DEBUG
skip_orig_size_check(folio_slab(folio)->slab_cache, object);
#endif
return slab_ksize(folio_slab(folio)->slab_cache);
}
void *kmalloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size)
{
void *ret = __kmem_cache_alloc_node(s, gfpflags, NUMA_NO_NODE,
size, _RET_IP_);
trace_kmalloc(_RET_IP_, ret, size, s->size, gfpflags, NUMA_NO_NODE);
ret = kasan_kmalloc(s, ret, size, gfpflags);
return ret;
}
EXPORT_SYMBOL(kmalloc_trace);
void *kmalloc_node_trace(struct kmem_cache *s, gfp_t gfpflags,
int node, size_t size)
{
void *ret = __kmem_cache_alloc_node(s, gfpflags, node, size, _RET_IP_);
trace_kmalloc(_RET_IP_, ret, size, s->size, gfpflags, node);
ret = kasan_kmalloc(s, ret, size, gfpflags);
return ret;
}
EXPORT_SYMBOL(kmalloc_node_trace);
gfp_t kmalloc_fix_flags(gfp_t flags)
{
gfp_t invalid_mask = flags & GFP_SLAB_BUG_MASK;
flags &= ~GFP_SLAB_BUG_MASK;
pr_warn("Unexpected gfp: %#x (%pGg). Fixing up to gfp: %#x (%pGg). Fix your code!\n",
invalid_mask, &invalid_mask, flags, &flags);
dump_stack();
return flags;
}
/*
* To avoid unnecessary overhead, we pass through large allocation requests
* directly to the page allocator. We use __GFP_COMP, because we will need to
* know the allocation order to free the pages properly in kfree.
*/
static void *__kmalloc_large_node(size_t size, gfp_t flags, int node)
{
struct page *page;
void *ptr = NULL;
unsigned int order = get_order(size);
if (unlikely(flags & GFP_SLAB_BUG_MASK))
flags = kmalloc_fix_flags(flags);
flags |= __GFP_COMP;
page = alloc_pages_node(node, flags, order);
if (page) {
ptr = page_address(page);
mod_lruvec_page_state(page, NR_SLAB_UNRECLAIMABLE_B,
PAGE_SIZE << order);
}
ptr = kasan_kmalloc_large(ptr, size, flags);
/* As ptr might get tagged, call kmemleak hook after KASAN. */
kmemleak_alloc(ptr, size, 1, flags);
kmsan_kmalloc_large(ptr, size, flags);
return ptr;
}
void *kmalloc_large(size_t size, gfp_t flags)
{
void *ret = __kmalloc_large_node(size, flags, NUMA_NO_NODE);
trace_kmalloc(_RET_IP_, ret, size, PAGE_SIZE << get_order(size),
flags, NUMA_NO_NODE);
return ret;
}
EXPORT_SYMBOL(kmalloc_large);
void *kmalloc_large_node(size_t size, gfp_t flags, int node)
{
void *ret = __kmalloc_large_node(size, flags, node);
trace_kmalloc(_RET_IP_, ret, size, PAGE_SIZE << get_order(size),
flags, node);
return ret;
}
EXPORT_SYMBOL(kmalloc_large_node);
#ifdef CONFIG_SLAB_FREELIST_RANDOM
/* Randomize a generic freelist */
static void freelist_randomize(unsigned int *list,
unsigned int count)
{
unsigned int rand;
unsigned int i;
for (i = 0; i < count; i++)
list[i] = i;
/* Fisher-Yates shuffle */
for (i = count - 1; i > 0; i--) {
rand = get_random_u32_below(i + 1);
swap(list[i], list[rand]);
}
}
/* Create a random sequence per cache */
int cache_random_seq_create(struct kmem_cache *cachep, unsigned int count,
gfp_t gfp)
{
if (count < 2 || cachep->random_seq)
return 0;
cachep->random_seq = kcalloc(count, sizeof(unsigned int), gfp);
if (!cachep->random_seq)
return -ENOMEM;
freelist_randomize(cachep->random_seq, count);
return 0;
}
/* Destroy the per-cache random freelist sequence */
void cache_random_seq_destroy(struct kmem_cache *cachep)
{
kfree(cachep->random_seq);
cachep->random_seq = NULL;
}
#endif /* CONFIG_SLAB_FREELIST_RANDOM */
#if defined(CONFIG_SLAB) || defined(CONFIG_SLUB_DEBUG)
#ifdef CONFIG_SLAB
#define SLABINFO_RIGHTS (0600)
#else
#define SLABINFO_RIGHTS (0400)
#endif
static void print_slabinfo_header(struct seq_file *m)
{
/*
* Output format version, so at least we can change it
* without _too_ many complaints.
*/
#ifdef CONFIG_DEBUG_SLAB
seq_puts(m, "slabinfo - version: 2.1 (statistics)\n");
#else
seq_puts(m, "slabinfo - version: 2.1\n");
#endif
seq_puts(m, "# name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab>");
seq_puts(m, " : tunables <limit> <batchcount> <sharedfactor>");
seq_puts(m, " : slabdata <active_slabs> <num_slabs> <sharedavail>");
#ifdef CONFIG_DEBUG_SLAB
seq_puts(m, " : globalstat <listallocs> <maxobjs> <grown> <reaped> <error> <maxfreeable> <nodeallocs> <remotefrees> <alienoverflow>");
seq_puts(m, " : cpustat <allochit> <allocmiss> <freehit> <freemiss>");
#endif
seq_putc(m, '\n');
}
static void *slab_start(struct seq_file *m, loff_t *pos)
{
mutex_lock(&slab_mutex);
return seq_list_start(&slab_caches, *pos);
}
static void *slab_next(struct seq_file *m, void *p, loff_t *pos)
{
return seq_list_next(p, &slab_caches, pos);
}
static void slab_stop(struct seq_file *m, void *p)
{
mutex_unlock(&slab_mutex);
}
static void cache_show(struct kmem_cache *s, struct seq_file *m)
{
struct slabinfo sinfo;
memset(&sinfo, 0, sizeof(sinfo));
get_slabinfo(s, &sinfo);
seq_printf(m, "%-17s %6lu %6lu %6u %4u %4d",
s->name, sinfo.active_objs, sinfo.num_objs, s->size,
sinfo.objects_per_slab, (1 << sinfo.cache_order));
seq_printf(m, " : tunables %4u %4u %4u",
sinfo.limit, sinfo.batchcount, sinfo.shared);
seq_printf(m, " : slabdata %6lu %6lu %6lu",
sinfo.active_slabs, sinfo.num_slabs, sinfo.shared_avail);
slabinfo_show_stats(m, s);
seq_putc(m, '\n');
}
static int slab_show(struct seq_file *m, void *p)
{
struct kmem_cache *s = list_entry(p, struct kmem_cache, list);
if (p == slab_caches.next)
print_slabinfo_header(m);
cache_show(s, m);
return 0;
}
void dump_unreclaimable_slab(void)
{
struct kmem_cache *s;
struct slabinfo sinfo;
/*
* Here acquiring slab_mutex is risky since we don't prefer to get
* sleep in oom path. But, without mutex hold, it may introduce a
* risk of crash.
* Use mutex_trylock to protect the list traverse, dump nothing
* without acquiring the mutex.
*/
if (!mutex_trylock(&slab_mutex)) {
pr_warn("excessive unreclaimable slab but cannot dump stats\n");
return;
}
pr_info("Unreclaimable slab info:\n");
pr_info("Name Used Total\n");
list_for_each_entry(s, &slab_caches, list) {
if (s->flags & SLAB_RECLAIM_ACCOUNT)
continue;
get_slabinfo(s, &sinfo);
if (sinfo.num_objs > 0)
pr_info("%-17s %10luKB %10luKB\n", s->name,
(sinfo.active_objs * s->size) / 1024,
(sinfo.num_objs * s->size) / 1024);
}
mutex_unlock(&slab_mutex);
}
/*
* slabinfo_op - iterator that generates /proc/slabinfo
*
* Output layout:
* cache-name
* num-active-objs
* total-objs
* object size
* num-active-slabs
* total-slabs
* num-pages-per-slab
* + further values on SMP and with statistics enabled
*/
static const struct seq_operations slabinfo_op = {
.start = slab_start,
.next = slab_next,
.stop = slab_stop,
.show = slab_show,
};
static int slabinfo_open(struct inode *inode, struct file *file)
{
return seq_open(file, &slabinfo_op);
}
static const struct proc_ops slabinfo_proc_ops = {
.proc_flags = PROC_ENTRY_PERMANENT,
.proc_open = slabinfo_open,
.proc_read = seq_read,
.proc_write = slabinfo_write,
.proc_lseek = seq_lseek,
.proc_release = seq_release,
};
static int __init slab_proc_init(void)
{
proc_create("slabinfo", SLABINFO_RIGHTS, NULL, &slabinfo_proc_ops);
return 0;
}
module_init(slab_proc_init);
#endif /* CONFIG_SLAB || CONFIG_SLUB_DEBUG */
static __always_inline __realloc_size(2) void *
__do_krealloc(const void *p, size_t new_size, gfp_t flags)
{
void *ret;
size_t ks;
/* Check for double-free before calling ksize. */
if (likely(!ZERO_OR_NULL_PTR(p))) {
if (!kasan_check_byte(p))
return NULL;
ks = ksize(p);
} else
ks = 0;
/* If the object still fits, repoison it precisely. */
if (ks >= new_size) {
p = kasan_krealloc((void *)p, new_size, flags);
return (void *)p;
}
ret = kmalloc_track_caller(new_size, flags);
if (ret && p) {
/* Disable KASAN checks as the object's redzone is accessed. */
kasan_disable_current();
memcpy(ret, kasan_reset_tag(p), ks);
kasan_enable_current();
}
return ret;
}
/**
* krealloc - reallocate memory. The contents will remain unchanged.
* @p: object to reallocate memory for.
* @new_size: how many bytes of memory are required.
* @flags: the type of memory to allocate.
*
* The contents of the object pointed to are preserved up to the
* lesser of the new and old sizes (__GFP_ZERO flag is effectively ignored).
* If @p is %NULL, krealloc() behaves exactly like kmalloc(). If @new_size
* is 0 and @p is not a %NULL pointer, the object pointed to is freed.
*
* Return: pointer to the allocated memory or %NULL in case of error
*/
void *krealloc(const void *p, size_t new_size, gfp_t flags)
{
void *ret;
if (unlikely(!new_size)) {
kfree(p);
return ZERO_SIZE_PTR;
}
ret = __do_krealloc(p, new_size, flags);
if (ret && kasan_reset_tag(p) != kasan_reset_tag(ret))
kfree(p);
return ret;
}
EXPORT_SYMBOL(krealloc);
/**
* kfree_sensitive - Clear sensitive information in memory before freeing
* @p: object to free memory of
*
* The memory of the object @p points to is zeroed before freed.
* If @p is %NULL, kfree_sensitive() does nothing.
*
* Note: this function zeroes the whole allocated buffer which can be a good
* deal bigger than the requested buffer size passed to kmalloc(). So be
* careful when using this function in performance sensitive code.
*/
void kfree_sensitive(const void *p)
{
size_t ks;
void *mem = (void *)p;
ks = ksize(mem);
if (ks) {
kasan_unpoison_range(mem, ks);
memzero_explicit(mem, ks);
}
kfree(mem);
}
EXPORT_SYMBOL(kfree_sensitive);
size_t ksize(const void *objp)
{
/*
* We need to first check that the pointer to the object is valid.
* The KASAN report printed from ksize() is more useful, then when
* it's printed later when the behaviour could be undefined due to
* a potential use-after-free or double-free.
*
* We use kasan_check_byte(), which is supported for the hardware
* tag-based KASAN mode, unlike kasan_check_read/write().
*
* If the pointed to memory is invalid, we return 0 to avoid users of
* ksize() writing to and potentially corrupting the memory region.
*
* We want to perform the check before __ksize(), to avoid potentially
* crashing in __ksize() due to accessing invalid metadata.
*/
if (unlikely(ZERO_OR_NULL_PTR(objp)) || !kasan_check_byte(objp))
return 0;
return kfence_ksize(objp) ?: __ksize(objp);
}
EXPORT_SYMBOL(ksize);
/* Tracepoints definitions. */
EXPORT_TRACEPOINT_SYMBOL(kmalloc);
EXPORT_TRACEPOINT_SYMBOL(kmem_cache_alloc);
EXPORT_TRACEPOINT_SYMBOL(kfree);
EXPORT_TRACEPOINT_SYMBOL(kmem_cache_free);
int should_failslab(struct kmem_cache *s, gfp_t gfpflags)
{
if (__should_failslab(s, gfpflags))
return -ENOMEM;
return 0;
}
ALLOW_ERROR_INJECTION(should_failslab, ERRNO);