linux/drivers/platform/surface/surface3_power.c
Linus Torvalds 7fb68b6c82 platform-drivers-x86 for v6.1-1
Highlights:
  -  AMD Platform Management Framework (PMF) driver with AMT and QnQF support
  -  AMD PMC: Improved logging for debugging s2idle issues
  -  Big refactor of the ACPI/x86 backlight handling, ensuring that we only
     register 1 /sys/class/backlight device per LCD panel
  -  Microsoft Surface:
     -  Surface Laptop Go 2 support
     -  Surface Pro 8 HID sensor support
  -  Asus WMI:
     -  Lots of cleanups
     -  Support for TUF RGB keyboard backlight control
     -  Add support for ROG X13 tablet mode
  -  Siemens Simatic: IPC227G and IPC427G support
  -  Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
  -  tools/power/x86/intel-speed-select: Various improvements
  -  Various cleanups
  -  Various small bugfixes
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI:
  -  video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native
  -  s2idle: Add a new ->check() callback for platform_s2idle_ops
  -  video: Fix indentation of video_detect_dmi_table[] entries
  -  video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks
  -  video: Drop "Samsung X360" acpi_backlight=native quirk
  -  video: Remove acpi_video_set_dmi_backlight_type()
  -  video: Add Apple GMUX brightness control detection
  -  video: Add Nvidia WMI EC brightness control detection (v3)
  -  video: Refactor acpi_video_get_backlight_type() a bit
  -  video: Remove code to unregister acpi_video backlight when a native backlight registers
  -  video: Make backlight class device registration a separate step (v2)
  -  video: Simplify acpi_video_unregister_backlight()
  -  video: Remove acpi_video_bus from list before tearing it down
  -  video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()
  -  video: Add acpi_video_backlight_use_native() helper
 
 acer-wmi:
  -  Move backlight DMI quirks to acpi/video_detect.c
  -  Acer Aspire One AOD270/Packard Bell Dot keymap fixes
 
 apple-gmux:
  -  Stop calling acpi/video.h functions
 
 asus-wmi:
  -  Expand support of GPU fan to read RPM and label
  -  Make kbd_rgb_mode_groups static
  -  Move acpi_backlight=native quirks to ACPI video_detect.c
  -  Move acpi_backlight=vendor quirks to ACPI video_detect.c
  -  Drop DMI chassis-type check from backlight handling
  -  Increase FAN_CURVE_BUF_LEN to 32
  -  Fix the name of the mic-mute LED classdev
  -  Implement TUF laptop keyboard power states
  -  Implement TUF laptop keyboard LED modes
  -  Support the GPU fan on TUF laptops
  -  Modify behaviour of Fn+F5 fan key
  -  Update tablet_mode_sw module-param help text
  -  Simplify tablet-mode-switch handling
  -  Simplify tablet-mode-switch probing
  -  Add support for ROG X13 tablet mode
  -  Adjust tablet/lidflip handling to use enum
  -  Support the hardware GPU MUX on some laptops
  -  Simplify some of the *_check_present() helpers
  -  Refactor panel_od attribute
  -  Refactor egpu_enable attribute
  -  Refactor disable_gpu attribute
  -  Document the panel_od sysfs attribute
  -  Document the egpu_enable sysfs attribute
  -  Document the dgpu_disable sysfs attribute
  -  Use kobj_to_dev()
  -  Convert all attr-show to use sysfs_emit
 
 compal-laptop:
  -  Get rid of a few forward declarations
 
 dell-privacy:
  -  convert to use dev_groups
 
 dell-smbios-base:
  -  Use sysfs_emit()
 
 dell-wmi:
  -  Add WMI event 0x0012 0x0003 to the list
 
 docs:
  -  ABI: charge_control_end_threshold may not support all values
 
 drivers/platform:
  -  toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models
 
 drm/amdgpu:
  -  Register ACPI video backlight when skipping amdgpu backlight registration
  -  Don't register backlight when another backlight should be used (v3)
 
 drm/i915:
  -  Call acpi_video_register_backlight() (v3)
  -  Don't register backlight when another backlight should be used (v2)
 
 drm/nouveau:
  -  Register ACPI video backlight when nv_backlight registration fails (v2)
  -  Don't register backlight when another backlight should be used (v2)
 
 drm/radeon:
  -  Register ACPI video backlight when skipping radeon backlight registration
  -  Don't register backlight when another backlight should be used (v3)
 
 drm/todo:
  -  Add entry about dealing with brightness control on devices with > 1 panel
 
 gpio-f7188x:
  -  use unique labels for banks/chips
  -  Add GPIO support for Nuvoton NCT6116
  -  add a prefix to macros to keep gpio namespace clean
  -  switch over to using pr_fmt
 
 hp-wmi:
  -  Support touchpad on/off
  -  Setting thermal profile fails with 0x06
 
 int3472/discrete:
  -  Drop a forward declaration
 
 intel-uncore-freq:
  -  Use sysfs_emit() to instead of scnprintf()
 
 intel_cht_int33fe:
  -  Fix comment according to the code flow
 
 leds:
  -  simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static
  -  simatic-ipc-leds-gpio: add new model 227G
 
 move from strlcpy with unused retval to strscpy:
  - move from strlcpy with unused retval to strscpy
 
 msi-laptop:
  -  Change DMI match / alias strings to fix module autoloading
  -  Add msi_scm_disable_hw_fn_handling() helper
  -  Add msi_scm_model_exit() helper
  -  Fix resource cleanup
  -  Simplify ec_delay handling
  -  Fix old-ec check for backlight registering
  -  Drop MSI_DRIVER_VERSION
  -  Use MODULE_DEVICE_TABLE()
 
 nvidia-wmi-ec-backlight:
  -  Use acpi_video_get_backlight_type()
  -  Move fw interface definitions to a header (v2)
 
 p2sb:
  -  Fix UAF when caller uses resource name
 
 platform/mellanox:
  -  mlxreg-lc: Make error handling flow consistent
  -  Remove redundant 'NULL' check
  -  Remove unnecessary code
  -  mlxreg-lc: Fix locking issue
  -  mlxreg-lc: Fix coverity warning
 
 platform/surface:
  -  Split memcpy() of struct ssam_event flexible array
  -  aggregator_registry: Add HID devices for sensors and UCSI client to SP8
  -  aggregator_registry: Rename HID device nodes based on new findings
  -  aggregator_registry: Rename HID device nodes based on their function
  -  aggregator_registry: Add support for Surface Laptop Go 2
 
 platform/x86:
  - use PLATFORM_DEVID_NONE instead of -1
 
 platform/x86/amd:
  -  pmc: Dump idle mask during "check" stage instead
  -  pmc: remove CONFIG_DEBUG_FS checks
  -  pmc: Fix build without debugfs
  -  pmc: Add sysfs files for SMU
  -  pmc: Add an extra STB message for checking s2idle entry
  -  pmc: Always write to the STB
  -  pmc: Add defines for STB events
 
 platform/x86/amd/pmf:
  -  Remove unused power_delta instances
  -  install notify handler after acpi init
  -  Add sysfs to toggle CnQF
  -  Add support for CnQF
  -  Fix clang unused variable warning
  -  Fix undefined reference to platform_profile
  -  Force load driver on older supported platforms
  -  Handle AMT and CQL events for Auto mode
  -  Add support for Auto mode feature
  -  Get performance metrics from PMFW
  -  Add fan control support
  -  Add heartbeat signal support
  -  Add debugfs information
  -  Add support SPS PMF feature
  -  Add support for PMF APCI layer
  -  Add support for PMF core layer
  -  Add ABI doc for AMD PMF
  -  Add AMD PMF driver entry
 
 platform/x86/intel/wmi:
  -  thunderbolt: Use dev_groups callback
 
 pmc_atom:
  -  Amend comment style and grammar
  -  Make terminator entry uniform
  -  Improve quirk message to be less cryptic
  -  Fix SLP_TYPx bitfield mask
 
 samsung-laptop:
  -  Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c
 
 simatic-ipc:
  -  add new model 427G
  -  enable watchdog for 227G
 
 thinkpad_acpi:
  -  Explicitly set to balanced mode on startup
 
 tools/power/x86/intel-speed-select:
  -  Release v1.13
  -  Optimize CPU initialization
  -  Utilize cpu_map to get physical id
  -  Remove unused struct clos_config fields
  -  Enforce isst_id value
  -  Do not export get_physical_id
  -  Introduce is_cpu_in_power_domain helper
  -  Cleanup get_physical_id usage
  -  Convert more function to use isst_id
  -  Add pkg and die in isst_id
  -  Introduce struct isst_id
  -  Remove unused core_mask array
  -  Remove dead code
  -  Fix cpu count for TDP level display
 
 toshiba_acpi:
  -  change turn_on_panel_on_resume to static
  -  Remove duplicate include
  -  Set correct parent for input device.
  -  Add fan RPM reading (hwmon interface)
  -  Add fan RPM reading (internals)
  -  Stop using acpi_video_set_dmi_backlight_type()
  -  Fix ECO LED control on Toshiba Z830
  - Battery charge mode in toshiba_acpi (internals)
  - Battery charge mode in toshiba_acpi (sysfs)
 
 wmi:
  -  Drop forward declaration of static functions
  -  Allow duplicate GUIDs for drivers that use struct wmi_driver
 
 x86-android-tablets:
  -  Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl
 QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu
 AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6
 n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu
 Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7
 aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/
 EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA==
 =afGw
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - AMD Platform Management Framework (PMF) driver with AMT and QnQF
   support

 - AMD PMC: Improved logging for debugging s2idle issues

 - Big refactor of the ACPI/x86 backlight handling, ensuring that we
   only register 1 /sys/class/backlight device per LCD panel

 - Microsoft Surface:
    - Surface Laptop Go 2 support
    - Surface Pro 8 HID sensor support

 - Asus WMI:
    - Lots of cleanups
    - Support for TUF RGB keyboard backlight control
    - Add support for ROG X13 tablet mode

 - Siemens Simatic: IPC227G and IPC427G support

 - Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support

 - tools/power/x86/intel-speed-select: Various improvements

 - Various cleanups

 - Various small bugfixes

* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
  platform/x86: use PLATFORM_DEVID_NONE instead of -1
  platform/x86/amd: pmc: Dump idle mask during "check" stage instead
  platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
  platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
  platform/surface: Split memcpy() of struct ssam_event flexible array
  platform/x86: compal-laptop: Get rid of a few forward declarations
  platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
  platform/x86: dell-smbios-base: Use sysfs_emit()
  platform/x86/amd/pmf: Remove unused power_delta instances
  platform/x86/amd/pmf: install notify handler after acpi init
  Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
  platform/x86/amd/pmf: Add sysfs to toggle CnQF
  platform/x86/amd/pmf: Add support for CnQF
  platform/x86/amd: pmc: Fix build without debugfs
  platform/x86: hp-wmi: Support touchpad on/off
  platform/x86: int3472/discrete: Drop a forward declaration
  platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
  platform/x86: wmi: Drop forward declaration of static functions
  platform/x86: toshiba_acpi: Remove duplicate include
  platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
  ...
2022-10-05 10:38:24 -07:00

588 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Supports for the power IC on the Surface 3 tablet.
*
* (C) Copyright 2016-2018 Red Hat, Inc
* (C) Copyright 2016-2018 Benjamin Tissoires <benjamin.tissoires@gmail.com>
* (C) Copyright 2016 Stephen Just <stephenjust@gmail.com>
*
* This driver has been reverse-engineered by parsing the DSDT of the Surface 3
* and looking at the registers of the chips.
*
* The DSDT allowed to find out that:
* - the driver is required for the ACPI BAT0 device to communicate to the chip
* through an operation region.
* - the various defines for the operation region functions to communicate with
* this driver
* - the DSM 3f99e367-6220-4955-8b0f-06ef2ae79412 allows to trigger ACPI
* events to BAT0 (the code is all available in the DSDT).
*
* Further findings regarding the 2 chips declared in the MSHW0011 are:
* - there are 2 chips declared:
* . 0x22 seems to control the ADP1 line status (and probably the charger)
* . 0x55 controls the battery directly
* - the battery chip uses a SMBus protocol (using plain SMBus allows non
* destructive commands):
* . the commands/registers used are in the range 0x00..0x7F
* . if bit 8 (0x80) is set in the SMBus command, the returned value is the
* same as when it is not set. There is a high chance this bit is the
* read/write
* . the various registers semantic as been deduced by observing the register
* dumps.
*/
#include <linux/acpi.h>
#include <linux/bits.h>
#include <linux/freezer.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/uuid.h>
#include <asm/unaligned.h>
#define SURFACE_3_POLL_INTERVAL (2 * HZ)
#define SURFACE_3_STRLEN 10
struct mshw0011_data {
struct i2c_client *adp1;
struct i2c_client *bat0;
unsigned short notify_mask;
struct task_struct *poll_task;
bool kthread_running;
bool charging;
bool bat_charging;
u8 trip_point;
s32 full_capacity;
};
struct mshw0011_handler_data {
struct acpi_connection_info info;
struct i2c_client *client;
};
struct bix {
u32 revision;
u32 power_unit;
u32 design_capacity;
u32 last_full_charg_capacity;
u32 battery_technology;
u32 design_voltage;
u32 design_capacity_of_warning;
u32 design_capacity_of_low;
u32 cycle_count;
u32 measurement_accuracy;
u32 max_sampling_time;
u32 min_sampling_time;
u32 max_average_interval;
u32 min_average_interval;
u32 battery_capacity_granularity_1;
u32 battery_capacity_granularity_2;
char model[SURFACE_3_STRLEN];
char serial[SURFACE_3_STRLEN];
char type[SURFACE_3_STRLEN];
char OEM[SURFACE_3_STRLEN];
} __packed;
struct bst {
u32 battery_state;
s32 battery_present_rate;
u32 battery_remaining_capacity;
u32 battery_present_voltage;
} __packed;
struct gsb_command {
u8 arg0;
u8 arg1;
u8 arg2;
} __packed;
struct gsb_buffer {
u8 status;
u8 len;
u8 ret;
union {
struct gsb_command cmd;
struct bst bst;
struct bix bix;
} __packed;
} __packed;
#define ACPI_BATTERY_STATE_DISCHARGING BIT(0)
#define ACPI_BATTERY_STATE_CHARGING BIT(1)
#define ACPI_BATTERY_STATE_CRITICAL BIT(2)
#define MSHW0011_CMD_DEST_BAT0 0x01
#define MSHW0011_CMD_DEST_ADP1 0x03
#define MSHW0011_CMD_BAT0_STA 0x01
#define MSHW0011_CMD_BAT0_BIX 0x02
#define MSHW0011_CMD_BAT0_BCT 0x03
#define MSHW0011_CMD_BAT0_BTM 0x04
#define MSHW0011_CMD_BAT0_BST 0x05
#define MSHW0011_CMD_BAT0_BTP 0x06
#define MSHW0011_CMD_ADP1_PSR 0x07
#define MSHW0011_CMD_BAT0_PSOC 0x09
#define MSHW0011_CMD_BAT0_PMAX 0x0a
#define MSHW0011_CMD_BAT0_PSRC 0x0b
#define MSHW0011_CMD_BAT0_CHGI 0x0c
#define MSHW0011_CMD_BAT0_ARTG 0x0d
#define MSHW0011_NOTIFY_GET_VERSION 0x00
#define MSHW0011_NOTIFY_ADP1 0x01
#define MSHW0011_NOTIFY_BAT0_BST 0x02
#define MSHW0011_NOTIFY_BAT0_BIX 0x05
#define MSHW0011_ADP1_REG_PSR 0x04
#define MSHW0011_BAT0_REG_CAPACITY 0x0c
#define MSHW0011_BAT0_REG_FULL_CHG_CAPACITY 0x0e
#define MSHW0011_BAT0_REG_DESIGN_CAPACITY 0x40
#define MSHW0011_BAT0_REG_VOLTAGE 0x08
#define MSHW0011_BAT0_REG_RATE 0x14
#define MSHW0011_BAT0_REG_OEM 0x45
#define MSHW0011_BAT0_REG_TYPE 0x4e
#define MSHW0011_BAT0_REG_SERIAL_NO 0x56
#define MSHW0011_BAT0_REG_CYCLE_CNT 0x6e
#define MSHW0011_EV_2_5_MASK GENMASK(8, 0)
/* 3f99e367-6220-4955-8b0f-06ef2ae79412 */
static const guid_t mshw0011_guid =
GUID_INIT(0x3F99E367, 0x6220, 0x4955, 0x8B, 0x0F, 0x06, 0xEF,
0x2A, 0xE7, 0x94, 0x12);
static int
mshw0011_notify(struct mshw0011_data *cdata, u8 arg1, u8 arg2,
unsigned int *ret_value)
{
union acpi_object *obj;
acpi_handle handle;
unsigned int i;
handle = ACPI_HANDLE(&cdata->adp1->dev);
if (!handle)
return -ENODEV;
obj = acpi_evaluate_dsm_typed(handle, &mshw0011_guid, arg1, arg2, NULL,
ACPI_TYPE_BUFFER);
if (!obj) {
dev_err(&cdata->adp1->dev, "device _DSM execution failed\n");
return -ENODEV;
}
*ret_value = 0;
for (i = 0; i < obj->buffer.length; i++)
*ret_value |= obj->buffer.pointer[i] << (i * 8);
ACPI_FREE(obj);
return 0;
}
static const struct bix default_bix = {
.revision = 0x00,
.power_unit = 0x01,
.design_capacity = 0x1dca,
.last_full_charg_capacity = 0x1dca,
.battery_technology = 0x01,
.design_voltage = 0x10df,
.design_capacity_of_warning = 0x8f,
.design_capacity_of_low = 0x47,
.cycle_count = 0xffffffff,
.measurement_accuracy = 0x00015f90,
.max_sampling_time = 0x03e8,
.min_sampling_time = 0x03e8,
.max_average_interval = 0x03e8,
.min_average_interval = 0x03e8,
.battery_capacity_granularity_1 = 0x45,
.battery_capacity_granularity_2 = 0x11,
.model = "P11G8M",
.serial = "",
.type = "LION",
.OEM = "",
};
static int mshw0011_bix(struct mshw0011_data *cdata, struct bix *bix)
{
struct i2c_client *client = cdata->bat0;
char buf[SURFACE_3_STRLEN];
int ret;
*bix = default_bix;
/* get design capacity */
ret = i2c_smbus_read_word_data(client,
MSHW0011_BAT0_REG_DESIGN_CAPACITY);
if (ret < 0) {
dev_err(&client->dev, "Error reading design capacity: %d\n",
ret);
return ret;
}
bix->design_capacity = ret;
/* get last full charge capacity */
ret = i2c_smbus_read_word_data(client,
MSHW0011_BAT0_REG_FULL_CHG_CAPACITY);
if (ret < 0) {
dev_err(&client->dev,
"Error reading last full charge capacity: %d\n", ret);
return ret;
}
bix->last_full_charg_capacity = ret;
/*
* Get serial number, on some devices (with unofficial replacement
* battery?) reading any of the serial number range addresses gets
* nacked in this case just leave the serial number empty.
*/
ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_SERIAL_NO,
sizeof(buf), buf);
if (ret == -EREMOTEIO) {
/* no serial number available */
} else if (ret != sizeof(buf)) {
dev_err(&client->dev, "Error reading serial no: %d\n", ret);
return ret;
} else {
snprintf(bix->serial, ARRAY_SIZE(bix->serial), "%3pE%6pE", buf + 7, buf);
}
/* get cycle count */
ret = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CYCLE_CNT);
if (ret < 0) {
dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
return ret;
}
bix->cycle_count = ret;
/* get OEM name */
ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_OEM,
4, buf);
if (ret != 4) {
dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
return ret;
}
snprintf(bix->OEM, ARRAY_SIZE(bix->OEM), "%3pE", buf);
return 0;
}
static int mshw0011_bst(struct mshw0011_data *cdata, struct bst *bst)
{
struct i2c_client *client = cdata->bat0;
int rate, capacity, voltage, state;
s16 tmp;
rate = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_RATE);
if (rate < 0)
return rate;
capacity = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CAPACITY);
if (capacity < 0)
return capacity;
voltage = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_VOLTAGE);
if (voltage < 0)
return voltage;
tmp = rate;
bst->battery_present_rate = abs((s32)tmp);
state = 0;
if ((s32) tmp > 0)
state |= ACPI_BATTERY_STATE_CHARGING;
else if ((s32) tmp < 0)
state |= ACPI_BATTERY_STATE_DISCHARGING;
bst->battery_state = state;
bst->battery_remaining_capacity = capacity;
bst->battery_present_voltage = voltage;
return 0;
}
static int mshw0011_adp_psr(struct mshw0011_data *cdata)
{
return i2c_smbus_read_byte_data(cdata->adp1, MSHW0011_ADP1_REG_PSR);
}
static int mshw0011_isr(struct mshw0011_data *cdata)
{
struct bst bst;
struct bix bix;
int ret;
bool status, bat_status;
ret = mshw0011_adp_psr(cdata);
if (ret < 0)
return ret;
status = ret;
if (status != cdata->charging)
mshw0011_notify(cdata, cdata->notify_mask,
MSHW0011_NOTIFY_ADP1, &ret);
cdata->charging = status;
ret = mshw0011_bst(cdata, &bst);
if (ret < 0)
return ret;
bat_status = bst.battery_state;
if (bat_status != cdata->bat_charging)
mshw0011_notify(cdata, cdata->notify_mask,
MSHW0011_NOTIFY_BAT0_BST, &ret);
cdata->bat_charging = bat_status;
ret = mshw0011_bix(cdata, &bix);
if (ret < 0)
return ret;
if (bix.last_full_charg_capacity != cdata->full_capacity)
mshw0011_notify(cdata, cdata->notify_mask,
MSHW0011_NOTIFY_BAT0_BIX, &ret);
cdata->full_capacity = bix.last_full_charg_capacity;
return 0;
}
static int mshw0011_poll_task(void *data)
{
struct mshw0011_data *cdata = data;
int ret = 0;
cdata->kthread_running = true;
set_freezable();
while (!kthread_should_stop()) {
schedule_timeout_interruptible(SURFACE_3_POLL_INTERVAL);
try_to_freeze();
ret = mshw0011_isr(data);
if (ret)
break;
}
cdata->kthread_running = false;
return ret;
}
static acpi_status
mshw0011_space_handler(u32 function, acpi_physical_address command,
u32 bits, u64 *value64,
void *handler_context, void *region_context)
{
struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
struct mshw0011_handler_data *data = handler_context;
struct acpi_connection_info *info = &data->info;
struct acpi_resource_i2c_serialbus *sb;
struct i2c_client *client = data->client;
struct mshw0011_data *cdata = i2c_get_clientdata(client);
struct acpi_resource *ares;
u32 accessor_type = function >> 16;
acpi_status ret;
int status = 1;
ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
if (ACPI_FAILURE(ret))
return ret;
if (!value64 || !i2c_acpi_get_i2c_resource(ares, &sb)) {
ret = AE_BAD_PARAMETER;
goto err;
}
if (accessor_type != ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS) {
ret = AE_BAD_PARAMETER;
goto err;
}
if (gsb->cmd.arg0 == MSHW0011_CMD_DEST_ADP1 &&
gsb->cmd.arg1 == MSHW0011_CMD_ADP1_PSR) {
status = mshw0011_adp_psr(cdata);
if (status >= 0) {
ret = AE_OK;
goto out;
} else {
ret = AE_ERROR;
goto err;
}
}
if (gsb->cmd.arg0 != MSHW0011_CMD_DEST_BAT0) {
ret = AE_BAD_PARAMETER;
goto err;
}
switch (gsb->cmd.arg1) {
case MSHW0011_CMD_BAT0_STA:
break;
case MSHW0011_CMD_BAT0_BIX:
ret = mshw0011_bix(cdata, &gsb->bix);
break;
case MSHW0011_CMD_BAT0_BTP:
cdata->trip_point = gsb->cmd.arg2;
break;
case MSHW0011_CMD_BAT0_BST:
ret = mshw0011_bst(cdata, &gsb->bst);
break;
default:
dev_info(&cdata->bat0->dev, "command(0x%02x) is not supported.\n", gsb->cmd.arg1);
ret = AE_BAD_PARAMETER;
goto err;
}
out:
gsb->ret = status;
gsb->status = 0;
err:
ACPI_FREE(ares);
return ret;
}
static int mshw0011_install_space_handler(struct i2c_client *client)
{
struct acpi_device *adev;
struct mshw0011_handler_data *data;
acpi_status status;
adev = ACPI_COMPANION(&client->dev);
if (!adev)
return -ENODEV;
data = kzalloc(sizeof(struct mshw0011_handler_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
status = acpi_bus_attach_private_data(adev->handle, (void *)data);
if (ACPI_FAILURE(status)) {
kfree(data);
return -ENOMEM;
}
status = acpi_install_address_space_handler(adev->handle,
ACPI_ADR_SPACE_GSBUS,
&mshw0011_space_handler,
NULL,
data);
if (ACPI_FAILURE(status)) {
dev_err(&client->dev, "Error installing i2c space handler\n");
acpi_bus_detach_private_data(adev->handle);
kfree(data);
return -ENOMEM;
}
acpi_dev_clear_dependencies(adev);
return 0;
}
static void mshw0011_remove_space_handler(struct i2c_client *client)
{
struct mshw0011_handler_data *data;
acpi_handle handle;
acpi_status status;
handle = ACPI_HANDLE(&client->dev);
if (!handle)
return;
acpi_remove_address_space_handler(handle,
ACPI_ADR_SPACE_GSBUS,
&mshw0011_space_handler);
status = acpi_bus_get_private_data(handle, (void **)&data);
if (ACPI_SUCCESS(status))
kfree(data);
acpi_bus_detach_private_data(handle);
}
static int mshw0011_probe(struct i2c_client *client)
{
struct i2c_board_info board_info;
struct device *dev = &client->dev;
struct i2c_client *bat0;
struct mshw0011_data *data;
int error, mask;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->adp1 = client;
i2c_set_clientdata(client, data);
memset(&board_info, 0, sizeof(board_info));
strscpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
bat0 = i2c_acpi_new_device(dev, 1, &board_info);
if (IS_ERR(bat0))
return PTR_ERR(bat0);
data->bat0 = bat0;
i2c_set_clientdata(bat0, data);
error = mshw0011_notify(data, 1, MSHW0011_NOTIFY_GET_VERSION, &mask);
if (error)
goto out_err;
data->notify_mask = mask == MSHW0011_EV_2_5_MASK;
data->poll_task = kthread_run(mshw0011_poll_task, data, "mshw0011_adp");
if (IS_ERR(data->poll_task)) {
error = PTR_ERR(data->poll_task);
dev_err(&client->dev, "Unable to run kthread err %d\n", error);
goto out_err;
}
error = mshw0011_install_space_handler(client);
if (error)
goto out_err;
return 0;
out_err:
if (data->kthread_running)
kthread_stop(data->poll_task);
i2c_unregister_device(data->bat0);
return error;
}
static void mshw0011_remove(struct i2c_client *client)
{
struct mshw0011_data *cdata = i2c_get_clientdata(client);
mshw0011_remove_space_handler(client);
if (cdata->kthread_running)
kthread_stop(cdata->poll_task);
i2c_unregister_device(cdata->bat0);
}
static const struct acpi_device_id mshw0011_acpi_match[] = {
{ "MSHW0011", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, mshw0011_acpi_match);
static struct i2c_driver mshw0011_driver = {
.probe_new = mshw0011_probe,
.remove = mshw0011_remove,
.driver = {
.name = "mshw0011",
.acpi_match_table = mshw0011_acpi_match,
},
};
module_i2c_driver(mshw0011_driver);
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
MODULE_DESCRIPTION("mshw0011 driver");
MODULE_LICENSE("GPL v2");