linux/arch/alpha/include/asm/system.h
David Howells df9ee29270 Fix IRQ flag handling naming
Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
2010-10-07 14:08:55 +01:00

355 lines
12 KiB
C

#ifndef __ALPHA_SYSTEM_H
#define __ALPHA_SYSTEM_H
#include <asm/pal.h>
#include <asm/page.h>
#include <asm/barrier.h>
/*
* System defines.. Note that this is included both from .c and .S
* files, so it does only defines, not any C code.
*/
/*
* We leave one page for the initial stack page, and one page for
* the initial process structure. Also, the console eats 3 MB for
* the initial bootloader (one of which we can reclaim later).
*/
#define BOOT_PCB 0x20000000
#define BOOT_ADDR 0x20000000
/* Remove when official MILO sources have ELF support: */
#define BOOT_SIZE (16*1024)
#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
#define KERNEL_START_PHYS 0x300000 /* Old bootloaders hardcoded this. */
#else
#define KERNEL_START_PHYS 0x1000000 /* required: Wildfire/Titan/Marvel */
#endif
#define KERNEL_START (PAGE_OFFSET+KERNEL_START_PHYS)
#define SWAPPER_PGD KERNEL_START
#define INIT_STACK (PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
#define EMPTY_PGT (PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
#define EMPTY_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
#define ZERO_PGE (PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
#define START_ADDR (PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
/*
* This is setup by the secondary bootstrap loader. Because
* the zero page is zeroed out as soon as the vm system is
* initialized, we need to copy things out into a more permanent
* place.
*/
#define PARAM ZERO_PGE
#define COMMAND_LINE ((char*)(PARAM + 0x0000))
#define INITRD_START (*(unsigned long *) (PARAM+0x100))
#define INITRD_SIZE (*(unsigned long *) (PARAM+0x108))
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#define AT_VECTOR_SIZE_ARCH 4 /* entries in ARCH_DLINFO */
/*
* This is the logout header that should be common to all platforms
* (assuming they are running OSF/1 PALcode, I guess).
*/
struct el_common {
unsigned int size; /* size in bytes of logout area */
unsigned int sbz1 : 30; /* should be zero */
unsigned int err2 : 1; /* second error */
unsigned int retry : 1; /* retry flag */
unsigned int proc_offset; /* processor-specific offset */
unsigned int sys_offset; /* system-specific offset */
unsigned int code; /* machine check code */
unsigned int frame_rev; /* frame revision */
};
/* Machine Check Frame for uncorrectable errors (Large format)
* --- This is used to log uncorrectable errors such as
* double bit ECC errors.
* --- These errors are detected by both processor and systems.
*/
struct el_common_EV5_uncorrectable_mcheck {
unsigned long shadow[8]; /* Shadow reg. 8-14, 25 */
unsigned long paltemp[24]; /* PAL TEMP REGS. */
unsigned long exc_addr; /* Address of excepting instruction*/
unsigned long exc_sum; /* Summary of arithmetic traps. */
unsigned long exc_mask; /* Exception mask (from exc_sum). */
unsigned long pal_base; /* Base address for PALcode. */
unsigned long isr; /* Interrupt Status Reg. */
unsigned long icsr; /* CURRENT SETUP OF EV5 IBOX */
unsigned long ic_perr_stat; /* I-CACHE Reg. <11> set Data parity
<12> set TAG parity*/
unsigned long dc_perr_stat; /* D-CACHE error Reg. Bits set to 1:
<2> Data error in bank 0
<3> Data error in bank 1
<4> Tag error in bank 0
<5> Tag error in bank 1 */
unsigned long va; /* Effective VA of fault or miss. */
unsigned long mm_stat; /* Holds the reason for D-stream
fault or D-cache parity errors */
unsigned long sc_addr; /* Address that was being accessed
when EV5 detected Secondary cache
failure. */
unsigned long sc_stat; /* Helps determine if the error was
TAG/Data parity(Secondary Cache)*/
unsigned long bc_tag_addr; /* Contents of EV5 BC_TAG_ADDR */
unsigned long ei_addr; /* Physical address of any transfer
that is logged in EV5 EI_STAT */
unsigned long fill_syndrome; /* For correcting ECC errors. */
unsigned long ei_stat; /* Helps identify reason of any
processor uncorrectable error
at its external interface. */
unsigned long ld_lock; /* Contents of EV5 LD_LOCK register*/
};
struct el_common_EV6_mcheck {
unsigned int FrameSize; /* Bytes, including this field */
unsigned int FrameFlags; /* <31> = Retry, <30> = Second Error */
unsigned int CpuOffset; /* Offset to CPU-specific info */
unsigned int SystemOffset; /* Offset to system-specific info */
unsigned int MCHK_Code;
unsigned int MCHK_Frame_Rev;
unsigned long I_STAT; /* EV6 Internal Processor Registers */
unsigned long DC_STAT; /* (See the 21264 Spec) */
unsigned long C_ADDR;
unsigned long DC1_SYNDROME;
unsigned long DC0_SYNDROME;
unsigned long C_STAT;
unsigned long C_STS;
unsigned long MM_STAT;
unsigned long EXC_ADDR;
unsigned long IER_CM;
unsigned long ISUM;
unsigned long RESERVED0;
unsigned long PAL_BASE;
unsigned long I_CTL;
unsigned long PCTX;
};
extern void halt(void) __attribute__((noreturn));
#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt))
#define switch_to(P,N,L) \
do { \
(L) = alpha_switch_to(virt_to_phys(&task_thread_info(N)->pcb), (P)); \
check_mmu_context(); \
} while (0)
struct task_struct;
extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
#define imb() \
__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
#define draina() \
__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory")
enum implver_enum {
IMPLVER_EV4,
IMPLVER_EV5,
IMPLVER_EV6
};
#ifdef CONFIG_ALPHA_GENERIC
#define implver() \
({ unsigned long __implver; \
__asm__ ("implver %0" : "=r"(__implver)); \
(enum implver_enum) __implver; })
#else
/* Try to eliminate some dead code. */
#ifdef CONFIG_ALPHA_EV4
#define implver() IMPLVER_EV4
#endif
#ifdef CONFIG_ALPHA_EV5
#define implver() IMPLVER_EV5
#endif
#if defined(CONFIG_ALPHA_EV6)
#define implver() IMPLVER_EV6
#endif
#endif
enum amask_enum {
AMASK_BWX = (1UL << 0),
AMASK_FIX = (1UL << 1),
AMASK_CIX = (1UL << 2),
AMASK_MAX = (1UL << 8),
AMASK_PRECISE_TRAP = (1UL << 9),
};
#define amask(mask) \
({ unsigned long __amask, __input = (mask); \
__asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input)); \
__amask; })
#define __CALL_PAL_R0(NAME, TYPE) \
extern inline TYPE NAME(void) \
{ \
register TYPE __r0 __asm__("$0"); \
__asm__ __volatile__( \
"call_pal %1 # " #NAME \
:"=r" (__r0) \
:"i" (PAL_ ## NAME) \
:"$1", "$16", "$22", "$23", "$24", "$25"); \
return __r0; \
}
#define __CALL_PAL_W1(NAME, TYPE0) \
extern inline void NAME(TYPE0 arg0) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
__asm__ __volatile__( \
"call_pal %1 # "#NAME \
: "=r"(__r16) \
: "i"(PAL_ ## NAME), "0"(__r16) \
: "$1", "$22", "$23", "$24", "$25"); \
}
#define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \
extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register TYPE0 __r16 __asm__("$16") = arg0; \
register TYPE1 __r17 __asm__("$17") = arg1; \
__asm__ __volatile__( \
"call_pal %2 # "#NAME \
: "=r"(__r16), "=r"(__r17) \
: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \
: "$1", "$22", "$23", "$24", "$25"); \
}
#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \
extern inline RTYPE NAME(TYPE0 arg0) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
__asm__ __volatile__( \
"call_pal %2 # "#NAME \
: "=r"(__r16), "=r"(__r0) \
: "i"(PAL_ ## NAME), "0"(__r16) \
: "$1", "$22", "$23", "$24", "$25"); \
return __r0; \
}
#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \
extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \
{ \
register RTYPE __r0 __asm__("$0"); \
register TYPE0 __r16 __asm__("$16") = arg0; \
register TYPE1 __r17 __asm__("$17") = arg1; \
__asm__ __volatile__( \
"call_pal %3 # "#NAME \
: "=r"(__r16), "=r"(__r17), "=r"(__r0) \
: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17) \
: "$1", "$22", "$23", "$24", "$25"); \
return __r0; \
}
__CALL_PAL_W1(cflush, unsigned long);
__CALL_PAL_R0(rdmces, unsigned long);
__CALL_PAL_R0(rdps, unsigned long);
__CALL_PAL_R0(rdusp, unsigned long);
__CALL_PAL_RW1(swpipl, unsigned long, unsigned long);
__CALL_PAL_R0(whami, unsigned long);
__CALL_PAL_W2(wrent, void*, unsigned long);
__CALL_PAL_W1(wripir, unsigned long);
__CALL_PAL_W1(wrkgp, unsigned long);
__CALL_PAL_W1(wrmces, unsigned long);
__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
__CALL_PAL_W1(wrusp, unsigned long);
__CALL_PAL_W1(wrvptptr, unsigned long);
/*
* TB routines..
*/
#define __tbi(nr,arg,arg1...) \
({ \
register unsigned long __r16 __asm__("$16") = (nr); \
register unsigned long __r17 __asm__("$17"); arg; \
__asm__ __volatile__( \
"call_pal %3 #__tbi" \
:"=r" (__r16),"=r" (__r17) \
:"0" (__r16),"i" (PAL_tbi) ,##arg1 \
:"$0", "$1", "$22", "$23", "$24", "$25"); \
})
#define tbi(x,y) __tbi(x,__r17=(y),"1" (__r17))
#define tbisi(x) __tbi(1,__r17=(x),"1" (__r17))
#define tbisd(x) __tbi(2,__r17=(x),"1" (__r17))
#define tbis(x) __tbi(3,__r17=(x),"1" (__r17))
#define tbiap() __tbi(-1, /* no second argument */)
#define tbia() __tbi(-2, /* no second argument */)
/*
* Atomic exchange routines.
*/
#define __ASM__MB
#define ____xchg(type, args...) __xchg ## type ## _local(args)
#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args)
#include <asm/xchg.h>
#define xchg_local(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \
(unsigned long)_n_, \
sizeof(*(ptr))); \
})
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
})
#ifdef CONFIG_SMP
#undef __ASM__MB
#define __ASM__MB "\tmb\n"
#endif
#undef ____xchg
#undef ____cmpxchg
#define ____xchg(type, args...) __xchg ##type(args)
#define ____cmpxchg(type, args...) __cmpxchg ##type(args)
#include <asm/xchg.h>
#define xchg(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr)));\
})
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
})
#undef __ASM__MB
#undef ____cmpxchg
#define __HAVE_ARCH_CMPXCHG 1
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
#endif