linux/drivers/misc/qcom-coincell.c
Thomas Gleixner 97fb5e8d9b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 and
  only version 2 as published by the free software foundation this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00

146 lines
3.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
* Copyright (c) 2015, Sony Mobile Communications Inc.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
struct qcom_coincell {
struct device *dev;
struct regmap *regmap;
u32 base_addr;
};
#define QCOM_COINCELL_REG_RSET 0x44
#define QCOM_COINCELL_REG_VSET 0x45
#define QCOM_COINCELL_REG_ENABLE 0x46
#define QCOM_COINCELL_ENABLE BIT(7)
static const int qcom_rset_map[] = { 2100, 1700, 1200, 800 };
static const int qcom_vset_map[] = { 2500, 3200, 3100, 3000 };
/* NOTE: for pm8921 and others, voltage of 2500 is 16 (10000b), not 0 */
/* if enable==0, rset and vset are ignored */
static int qcom_coincell_chgr_config(struct qcom_coincell *chgr, int rset,
int vset, bool enable)
{
int i, j, rc;
/* if disabling, just do that and skip other operations */
if (!enable)
return regmap_write(chgr->regmap,
chgr->base_addr + QCOM_COINCELL_REG_ENABLE, 0);
/* find index for current-limiting resistor */
for (i = 0; i < ARRAY_SIZE(qcom_rset_map); i++)
if (rset == qcom_rset_map[i])
break;
if (i >= ARRAY_SIZE(qcom_rset_map)) {
dev_err(chgr->dev, "invalid rset-ohms value %d\n", rset);
return -EINVAL;
}
/* find index for charge voltage */
for (j = 0; j < ARRAY_SIZE(qcom_vset_map); j++)
if (vset == qcom_vset_map[j])
break;
if (j >= ARRAY_SIZE(qcom_vset_map)) {
dev_err(chgr->dev, "invalid vset-millivolts value %d\n", vset);
return -EINVAL;
}
rc = regmap_write(chgr->regmap,
chgr->base_addr + QCOM_COINCELL_REG_RSET, i);
if (rc) {
/*
* This is mainly to flag a bad base_addr (reg) from dts.
* Other failures writing to the registers should be
* extremely rare, or indicative of problems that
* should be reported elsewhere (eg. spmi failure).
*/
dev_err(chgr->dev, "could not write to RSET register\n");
return rc;
}
rc = regmap_write(chgr->regmap,
chgr->base_addr + QCOM_COINCELL_REG_VSET, j);
if (rc)
return rc;
/* set 'enable' register */
return regmap_write(chgr->regmap,
chgr->base_addr + QCOM_COINCELL_REG_ENABLE,
QCOM_COINCELL_ENABLE);
}
static int qcom_coincell_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct qcom_coincell chgr;
u32 rset = 0;
u32 vset = 0;
bool enable;
int rc;
chgr.dev = &pdev->dev;
chgr.regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!chgr.regmap) {
dev_err(chgr.dev, "Unable to get regmap\n");
return -EINVAL;
}
rc = of_property_read_u32(node, "reg", &chgr.base_addr);
if (rc)
return rc;
enable = !of_property_read_bool(node, "qcom,charger-disable");
if (enable) {
rc = of_property_read_u32(node, "qcom,rset-ohms", &rset);
if (rc) {
dev_err(chgr.dev,
"can't find 'qcom,rset-ohms' in DT block");
return rc;
}
rc = of_property_read_u32(node, "qcom,vset-millivolts", &vset);
if (rc) {
dev_err(chgr.dev,
"can't find 'qcom,vset-millivolts' in DT block");
return rc;
}
}
return qcom_coincell_chgr_config(&chgr, rset, vset, enable);
}
static const struct of_device_id qcom_coincell_match_table[] = {
{ .compatible = "qcom,pm8941-coincell", },
{}
};
MODULE_DEVICE_TABLE(of, qcom_coincell_match_table);
static struct platform_driver qcom_coincell_driver = {
.driver = {
.name = "qcom-spmi-coincell",
.of_match_table = qcom_coincell_match_table,
},
.probe = qcom_coincell_probe,
};
module_platform_driver(qcom_coincell_driver);
MODULE_DESCRIPTION("Qualcomm PMIC coincell charger driver");
MODULE_LICENSE("GPL v2");