linux/drivers/net/dsa/mt7530.h
John Crispin 8e6f1521ec net: dsa: mediatek: add adjust link support for user ports
Manually adjust the port settings of user ports once PHY polling has
completed. This patch extends the adjust_link callback to configure the
per port PMCR register, applying the proper values polled from the PHY.
Without this patch flow control was not always getting setup properly.

Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08 18:01:25 -07:00

404 lines
11 KiB
C

/*
* Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MT7530_H
#define __MT7530_H
#define MT7530_NUM_PORTS 7
#define MT7530_CPU_PORT 6
#define MT7530_NUM_FDB_RECORDS 2048
#define NUM_TRGMII_CTRL 5
#define TRGMII_BASE(x) (0x10000 + (x))
/* Registers to ethsys access */
#define ETHSYS_CLKCFG0 0x2c
#define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11)
#define SYSC_REG_RSTCTRL 0x34
#define RESET_MCM BIT(2)
/* Registers to mac forward control for unknown frames */
#define MT7530_MFC 0x10
#define BC_FFP(x) (((x) & 0xff) << 24)
#define UNM_FFP(x) (((x) & 0xff) << 16)
#define UNU_FFP(x) (((x) & 0xff) << 8)
#define UNU_FFP_MASK UNU_FFP(~0)
/* Registers for address table access */
#define MT7530_ATA1 0x74
#define STATIC_EMP 0
#define STATIC_ENT 3
#define MT7530_ATA2 0x78
/* Register for address table write data */
#define MT7530_ATWD 0x7c
/* Register for address table control */
#define MT7530_ATC 0x80
#define ATC_HASH (((x) & 0xfff) << 16)
#define ATC_BUSY BIT(15)
#define ATC_SRCH_END BIT(14)
#define ATC_SRCH_HIT BIT(13)
#define ATC_INVALID BIT(12)
#define ATC_MAT(x) (((x) & 0xf) << 8)
#define ATC_MAT_MACTAB ATC_MAT(0)
enum mt7530_fdb_cmd {
MT7530_FDB_READ = 0,
MT7530_FDB_WRITE = 1,
MT7530_FDB_FLUSH = 2,
MT7530_FDB_START = 4,
MT7530_FDB_NEXT = 5,
};
/* Registers for table search read address */
#define MT7530_TSRA1 0x84
#define MAC_BYTE_0 24
#define MAC_BYTE_1 16
#define MAC_BYTE_2 8
#define MAC_BYTE_3 0
#define MAC_BYTE_MASK 0xff
#define MT7530_TSRA2 0x88
#define MAC_BYTE_4 24
#define MAC_BYTE_5 16
#define CVID 0
#define CVID_MASK 0xfff
#define MT7530_ATRD 0x8C
#define AGE_TIMER 24
#define AGE_TIMER_MASK 0xff
#define PORT_MAP 4
#define PORT_MAP_MASK 0xff
#define ENT_STATUS 2
#define ENT_STATUS_MASK 0x3
/* Register for vlan table control */
#define MT7530_VTCR 0x90
#define VTCR_BUSY BIT(31)
#define VTCR_FUNC (((x) & 0xf) << 12)
#define VTCR_FUNC_RD_VID 0x1
#define VTCR_FUNC_WR_VID 0x2
#define VTCR_FUNC_INV_VID 0x3
#define VTCR_FUNC_VAL_VID 0x4
#define VTCR_VID ((x) & 0xfff)
/* Register for setup vlan and acl write data */
#define MT7530_VAWD1 0x94
#define PORT_STAG BIT(31)
#define IVL_MAC BIT(30)
#define PORT_MEM(x) (((x) & 0xff) << 16)
#define VALID BIT(1)
#define MT7530_VAWD2 0x98
/* Register for port STP state control */
#define MT7530_SSP_P(x) (0x2000 + ((x) * 0x100))
#define FID_PST(x) ((x) & 0x3)
#define FID_PST_MASK FID_PST(0x3)
enum mt7530_stp_state {
MT7530_STP_DISABLED = 0,
MT7530_STP_BLOCKING = 1,
MT7530_STP_LISTENING = 1,
MT7530_STP_LEARNING = 2,
MT7530_STP_FORWARDING = 3
};
/* Register for port control */
#define MT7530_PCR_P(x) (0x2004 + ((x) * 0x100))
#define PORT_VLAN(x) ((x) & 0x3)
#define PCR_MATRIX(x) (((x) & 0xff) << 16)
#define PORT_PRI(x) (((x) & 0x7) << 24)
#define EG_TAG(x) (((x) & 0x3) << 28)
#define PCR_MATRIX_MASK PCR_MATRIX(0xff)
#define PCR_MATRIX_CLR PCR_MATRIX(0)
/* Register for port security control */
#define MT7530_PSC_P(x) (0x200c + ((x) * 0x100))
#define SA_DIS BIT(4)
/* Register for port vlan control */
#define MT7530_PVC_P(x) (0x2010 + ((x) * 0x100))
#define PORT_SPEC_TAG BIT(5)
#define VLAN_ATTR(x) (((x) & 0x3) << 6)
#define STAG_VPID (((x) & 0xffff) << 16)
/* Register for port port-and-protocol based vlan 1 control */
#define MT7530_PPBV1_P(x) (0x2014 + ((x) * 0x100))
/* Register for port MAC control register */
#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
#define PMCR_MAC_MODE BIT(16)
#define PMCR_FORCE_MODE BIT(15)
#define PMCR_TX_EN BIT(14)
#define PMCR_RX_EN BIT(13)
#define PMCR_BACKOFF_EN BIT(9)
#define PMCR_BACKPR_EN BIT(8)
#define PMCR_TX_FC_EN BIT(5)
#define PMCR_RX_FC_EN BIT(4)
#define PMCR_FORCE_SPEED_1000 BIT(3)
#define PMCR_FORCE_SPEED_100 BIT(2)
#define PMCR_FORCE_FDX BIT(1)
#define PMCR_FORCE_LNK BIT(0)
#define PMCR_COMMON_LINK (PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \
PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \
PMCR_TX_EN | PMCR_RX_EN | \
PMCR_TX_FC_EN | PMCR_RX_FC_EN)
#define PMCR_CPUP_LINK (PMCR_COMMON_LINK | PMCR_FORCE_MODE | \
PMCR_FORCE_SPEED_1000 | \
PMCR_FORCE_FDX | \
PMCR_FORCE_LNK)
#define PMCR_USERP_LINK PMCR_COMMON_LINK
#define PMCR_FIXED_LINK (PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \
PMCR_FORCE_MODE | PMCR_TX_EN | \
PMCR_RX_EN | PMCR_BACKPR_EN | \
PMCR_BACKOFF_EN | \
PMCR_FORCE_SPEED_1000 | \
PMCR_FORCE_FDX | \
PMCR_FORCE_LNK)
#define PMCR_FIXED_LINK_FC (PMCR_FIXED_LINK | \
PMCR_TX_FC_EN | PMCR_RX_FC_EN)
#define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
/* Register for MIB */
#define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100)
#define MT7530_MIB_CCR 0x4fe0
#define CCR_MIB_ENABLE BIT(31)
#define CCR_RX_OCT_CNT_GOOD BIT(7)
#define CCR_RX_OCT_CNT_BAD BIT(6)
#define CCR_TX_OCT_CNT_GOOD BIT(5)
#define CCR_TX_OCT_CNT_BAD BIT(4)
#define CCR_MIB_FLUSH (CCR_RX_OCT_CNT_GOOD | \
CCR_RX_OCT_CNT_BAD | \
CCR_TX_OCT_CNT_GOOD | \
CCR_TX_OCT_CNT_BAD)
#define CCR_MIB_ACTIVATE (CCR_MIB_ENABLE | \
CCR_RX_OCT_CNT_GOOD | \
CCR_RX_OCT_CNT_BAD | \
CCR_TX_OCT_CNT_GOOD | \
CCR_TX_OCT_CNT_BAD)
/* Register for system reset */
#define MT7530_SYS_CTRL 0x7000
#define SYS_CTRL_PHY_RST BIT(2)
#define SYS_CTRL_SW_RST BIT(1)
#define SYS_CTRL_REG_RST BIT(0)
/* Register for hw trap status */
#define MT7530_HWTRAP 0x7800
/* Register for hw trap modification */
#define MT7530_MHWTRAP 0x7804
#define MHWTRAP_MANUAL BIT(16)
#define MHWTRAP_P5_MAC_SEL BIT(13)
#define MHWTRAP_P6_DIS BIT(8)
#define MHWTRAP_P5_RGMII_MODE BIT(7)
#define MHWTRAP_P5_DIS BIT(6)
#define MHWTRAP_PHY_ACCESS BIT(5)
/* Register for TOP signal control */
#define MT7530_TOP_SIG_CTRL 0x7808
#define TOP_SIG_CTRL_NORMAL (BIT(17) | BIT(16))
#define MT7530_IO_DRV_CR 0x7810
#define P5_IO_CLK_DRV(x) ((x) & 0x3)
#define P5_IO_DATA_DRV(x) (((x) & 0x3) << 4)
#define MT7530_P6ECR 0x7830
#define P6_INTF_MODE_MASK 0x3
#define P6_INTF_MODE(x) ((x) & 0x3)
/* Registers for TRGMII on the both side */
#define MT7530_TRGMII_RCK_CTRL 0x7a00
#define GSW_TRGMII_RCK_CTRL 0x300
#define RX_RST BIT(31)
#define RXC_DQSISEL BIT(30)
#define DQSI1_TAP_MASK (0x7f << 8)
#define DQSI0_TAP_MASK 0x7f
#define DQSI1_TAP(x) (((x) & 0x7f) << 8)
#define DQSI0_TAP(x) ((x) & 0x7f)
#define MT7530_TRGMII_RCK_RTT 0x7a04
#define GSW_TRGMII_RCK_RTT 0x304
#define DQS1_GATE BIT(31)
#define DQS0_GATE BIT(30)
#define MT7530_TRGMII_RD(x) (0x7a10 + (x) * 8)
#define GSW_TRGMII_RD(x) (0x310 + (x) * 8)
#define BSLIP_EN BIT(31)
#define EDGE_CHK BIT(30)
#define RD_TAP_MASK 0x7f
#define RD_TAP(x) ((x) & 0x7f)
#define GSW_TRGMII_TXCTRL 0x340
#define MT7530_TRGMII_TXCTRL 0x7a40
#define TRAIN_TXEN BIT(31)
#define TXC_INV BIT(30)
#define TX_RST BIT(28)
#define MT7530_TRGMII_TD_ODT(i) (0x7a54 + 8 * (i))
#define GSW_TRGMII_TD_ODT(i) (0x354 + 8 * (i))
#define TD_DM_DRVP(x) ((x) & 0xf)
#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
#define GSW_INTF_MODE 0x390
#define INTF_MODE_TRGMII BIT(1)
#define MT7530_TRGMII_TCK_CTRL 0x7a78
#define TCK_TAP(x) (((x) & 0xf) << 8)
#define MT7530_P5RGMIIRXCR 0x7b00
#define CSR_RGMII_EDGE_ALIGN BIT(8)
#define CSR_RGMII_RXC_0DEG_CFG(x) ((x) & 0xf)
#define MT7530_P5RGMIITXCR 0x7b04
#define CSR_RGMII_TXC_CFG(x) ((x) & 0x1f)
#define MT7530_CREV 0x7ffc
#define CHIP_NAME_SHIFT 16
#define MT7530_ID 0x7530
/* Registers for core PLL access through mmd indirect */
#define CORE_PLL_GROUP2 0x401
#define RG_SYSPLL_EN_NORMAL BIT(15)
#define RG_SYSPLL_VODEN BIT(14)
#define RG_SYSPLL_LF BIT(13)
#define RG_SYSPLL_RST_DLY(x) (((x) & 0x3) << 12)
#define RG_SYSPLL_LVROD_EN BIT(10)
#define RG_SYSPLL_PREDIV(x) (((x) & 0x3) << 8)
#define RG_SYSPLL_POSDIV(x) (((x) & 0x3) << 5)
#define RG_SYSPLL_FBKSEL BIT(4)
#define RT_SYSPLL_EN_AFE_OLT BIT(0)
#define CORE_PLL_GROUP4 0x403
#define RG_SYSPLL_DDSFBK_EN BIT(12)
#define RG_SYSPLL_BIAS_EN BIT(11)
#define RG_SYSPLL_BIAS_LPF_EN BIT(10)
#define CORE_PLL_GROUP5 0x404
#define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff)
#define CORE_PLL_GROUP6 0x405
#define RG_LCDDS_PCW_NCPO0(x) ((x) & 0xffff)
#define CORE_PLL_GROUP7 0x406
#define RG_LCDDS_PWDB BIT(15)
#define RG_LCDDS_ISO_EN BIT(13)
#define RG_LCCDS_C(x) (((x) & 0x7) << 4)
#define RG_LCDDS_PCW_NCPO_CHG BIT(3)
#define CORE_PLL_GROUP10 0x409
#define RG_LCDDS_SSC_DELTA(x) ((x) & 0xfff)
#define CORE_PLL_GROUP11 0x40a
#define RG_LCDDS_SSC_DELTA1(x) ((x) & 0xfff)
#define CORE_GSWPLL_GRP1 0x40d
#define RG_GSWPLL_PREDIV(x) (((x) & 0x3) << 14)
#define RG_GSWPLL_POSDIV_200M(x) (((x) & 0x3) << 12)
#define RG_GSWPLL_EN_PRE BIT(11)
#define RG_GSWPLL_FBKSEL BIT(10)
#define RG_GSWPLL_BP BIT(9)
#define RG_GSWPLL_BR BIT(8)
#define RG_GSWPLL_FBKDIV_200M(x) ((x) & 0xff)
#define CORE_GSWPLL_GRP2 0x40e
#define RG_GSWPLL_POSDIV_500M(x) (((x) & 0x3) << 8)
#define RG_GSWPLL_FBKDIV_500M(x) ((x) & 0xff)
#define CORE_TRGMII_GSW_CLK_CG 0x410
#define REG_GSWCK_EN BIT(0)
#define REG_TRGMIICK_EN BIT(1)
#define MIB_DESC(_s, _o, _n) \
{ \
.size = (_s), \
.offset = (_o), \
.name = (_n), \
}
struct mt7530_mib_desc {
unsigned int size;
unsigned int offset;
const char *name;
};
struct mt7530_fdb {
u16 vid;
u8 port_mask;
u8 aging;
u8 mac[6];
bool noarp;
};
struct mt7530_port {
bool enable;
u32 pm;
};
/* struct mt7530_priv - This is the main data structure for holding the state
* of the driver
* @dev: The device pointer
* @ds: The pointer to the dsa core structure
* @bus: The bus used for the device and built-in PHY
* @rstc: The pointer to reset control used by MCM
* @ethernet: The regmap used for access TRGMII-based registers
* @core_pwr: The power supplied into the core
* @io_pwr: The power supplied into the I/O
* @reset: The descriptor for GPIO line tied to its reset pin
* @mcm: Flag for distinguishing if standalone IC or module
* coupling
* @ports: Holding the state among ports
* @reg_mutex: The lock for protecting among process accessing
* registers
*/
struct mt7530_priv {
struct device *dev;
struct dsa_switch *ds;
struct mii_bus *bus;
struct reset_control *rstc;
struct regmap *ethernet;
struct regulator *core_pwr;
struct regulator *io_pwr;
struct gpio_desc *reset;
bool mcm;
struct mt7530_port ports[MT7530_NUM_PORTS];
/* protect among processes for registers access*/
struct mutex reg_mutex;
};
struct mt7530_hw_stats {
const char *string;
u16 reg;
u8 sizeof_stat;
};
struct mt7530_dummy_poll {
struct mt7530_priv *priv;
u32 reg;
};
static inline void INIT_MT7530_DUMMY_POLL(struct mt7530_dummy_poll *p,
struct mt7530_priv *priv, u32 reg)
{
p->priv = priv;
p->reg = reg;
}
#endif /* __MT7530_H */