linux/net/mac80211/ocb.c
Johannes Berg 6092077ad0 wifi: mac80211: introduce 'channel request'
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.

Unfortunately,  with EHT this is longer be sufficient,  at
least not for all hardware.  EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA  that specify the position
and bandwidth  for the non-AP STA  relative to the channel
the AP is using.  Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over  two channel contexts where they
differ by the AP being used.

As a first step,  introduce a concept of a channel request
('chanreq') for each interface,  to control the context it
requests.   This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.

Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08 13:07:34 +01:00

243 lines
6.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* OCB mode implementation
*
* Copyright: (c) 2014 Czech Technical University in Prague
* (c) 2014 Volkswagen Group Research
* Copyright (C) 2022 - 2023 Intel Corporation
* Author: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
* Funded by: Volkswagen Group Research
*/
#include <linux/delay.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include "rate.h"
#define IEEE80211_OCB_HOUSEKEEPING_INTERVAL (60 * HZ)
#define IEEE80211_OCB_PEER_INACTIVITY_LIMIT (240 * HZ)
#define IEEE80211_OCB_MAX_STA_ENTRIES 128
/**
* enum ocb_deferred_task_flags - mac80211 OCB deferred tasks
* @OCB_WORK_HOUSEKEEPING: run the periodic OCB housekeeping tasks
*
* These flags are used in @wrkq_flags field of &struct ieee80211_if_ocb
*/
enum ocb_deferred_task_flags {
OCB_WORK_HOUSEKEEPING,
};
void ieee80211_ocb_rx_no_sta(struct ieee80211_sub_if_data *sdata,
const u8 *bssid, const u8 *addr,
u32 supp_rates)
{
struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
struct ieee80211_local *local = sdata->local;
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_supported_band *sband;
struct sta_info *sta;
int band;
/* XXX: Consider removing the least recently used entry and
* allow new one to be added.
*/
if (local->num_sta >= IEEE80211_OCB_MAX_STA_ENTRIES) {
net_info_ratelimited("%s: No room for a new OCB STA entry %pM\n",
sdata->name, addr);
return;
}
ocb_dbg(sdata, "Adding new OCB station %pM\n", addr);
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf);
if (WARN_ON_ONCE(!chanctx_conf)) {
rcu_read_unlock();
return;
}
band = chanctx_conf->def.chan->band;
rcu_read_unlock();
sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
if (!sta)
return;
/* Add only mandatory rates for now */
sband = local->hw.wiphy->bands[band];
sta->sta.deflink.supp_rates[band] = ieee80211_mandatory_rates(sband);
spin_lock(&ifocb->incomplete_lock);
list_add(&sta->list, &ifocb->incomplete_stations);
spin_unlock(&ifocb->incomplete_lock);
wiphy_work_queue(local->hw.wiphy, &sdata->work);
}
static struct sta_info *ieee80211_ocb_finish_sta(struct sta_info *sta)
__acquires(RCU)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
u8 addr[ETH_ALEN];
memcpy(addr, sta->sta.addr, ETH_ALEN);
ocb_dbg(sdata, "Adding new IBSS station %pM (dev=%s)\n",
addr, sdata->name);
sta_info_move_state(sta, IEEE80211_STA_AUTH);
sta_info_move_state(sta, IEEE80211_STA_ASSOC);
sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
rate_control_rate_init(sta);
/* If it fails, maybe we raced another insertion? */
if (sta_info_insert_rcu(sta))
return sta_info_get(sdata, addr);
return sta;
}
static void ieee80211_ocb_housekeeping(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
ocb_dbg(sdata, "Running ocb housekeeping\n");
ieee80211_sta_expire(sdata, IEEE80211_OCB_PEER_INACTIVITY_LIMIT);
mod_timer(&ifocb->housekeeping_timer,
round_jiffies(jiffies + IEEE80211_OCB_HOUSEKEEPING_INTERVAL));
}
void ieee80211_ocb_work(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
struct sta_info *sta;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
if (ifocb->joined != true)
return;
spin_lock_bh(&ifocb->incomplete_lock);
while (!list_empty(&ifocb->incomplete_stations)) {
sta = list_first_entry(&ifocb->incomplete_stations,
struct sta_info, list);
list_del(&sta->list);
spin_unlock_bh(&ifocb->incomplete_lock);
ieee80211_ocb_finish_sta(sta);
rcu_read_unlock();
spin_lock_bh(&ifocb->incomplete_lock);
}
spin_unlock_bh(&ifocb->incomplete_lock);
if (test_and_clear_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags))
ieee80211_ocb_housekeeping(sdata);
}
static void ieee80211_ocb_housekeeping_timer(struct timer_list *t)
{
struct ieee80211_sub_if_data *sdata =
from_timer(sdata, t, u.ocb.housekeeping_timer);
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags);
wiphy_work_queue(local->hw.wiphy, &sdata->work);
}
void ieee80211_ocb_setup_sdata(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
timer_setup(&ifocb->housekeeping_timer,
ieee80211_ocb_housekeeping_timer, 0);
INIT_LIST_HEAD(&ifocb->incomplete_stations);
spin_lock_init(&ifocb->incomplete_lock);
}
int ieee80211_ocb_join(struct ieee80211_sub_if_data *sdata,
struct ocb_setup *setup)
{
struct ieee80211_chan_req chanreq = { .oper = setup->chandef };
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
u64 changed = BSS_CHANGED_OCB | BSS_CHANGED_BSSID;
int err;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
if (ifocb->joined == true)
return -EINVAL;
sdata->deflink.operating_11g_mode = true;
sdata->deflink.smps_mode = IEEE80211_SMPS_OFF;
sdata->deflink.needed_rx_chains = sdata->local->rx_chains;
err = ieee80211_link_use_channel(&sdata->deflink, &chanreq,
IEEE80211_CHANCTX_SHARED);
if (err)
return err;
ieee80211_bss_info_change_notify(sdata, changed);
ifocb->joined = true;
set_bit(OCB_WORK_HOUSEKEEPING, &ifocb->wrkq_flags);
wiphy_work_queue(local->hw.wiphy, &sdata->work);
netif_carrier_on(sdata->dev);
return 0;
}
int ieee80211_ocb_leave(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_ocb *ifocb = &sdata->u.ocb;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
lockdep_assert_wiphy(sdata->local->hw.wiphy);
ifocb->joined = false;
sta_info_flush(sdata);
spin_lock_bh(&ifocb->incomplete_lock);
while (!list_empty(&ifocb->incomplete_stations)) {
sta = list_first_entry(&ifocb->incomplete_stations,
struct sta_info, list);
list_del(&sta->list);
spin_unlock_bh(&ifocb->incomplete_lock);
sta_info_free(local, sta);
spin_lock_bh(&ifocb->incomplete_lock);
}
spin_unlock_bh(&ifocb->incomplete_lock);
netif_carrier_off(sdata->dev);
clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_OCB);
ieee80211_link_release_channel(&sdata->deflink);
skb_queue_purge(&sdata->skb_queue);
del_timer_sync(&sdata->u.ocb.housekeeping_timer);
/* If the timer fired while we waited for it, it will have
* requeued the work. Now the work will be running again
* but will not rearm the timer again because it checks
* whether we are connected to the network or not -- at this
* point we shouldn't be anymore.
*/
return 0;
}