linux/arch/arm/mach-s3c24xx/Kconfig
Linus Torvalds d027db132b ARM: arm-soc: SoC updates for 3.8
This contains the bulk of new SoC development for this merge window.
 
 Two new platforms have been added, the sunxi platforms (Allwinner A1x
 SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
 series of ARMv7 platforms from them, where the hope is that we can
 keep the platform code generic enough to have them all share one mach
 directory. The new Broadcom platform is contributed by Christian Daudt.
 
 Highbank has grown support for Calxeda's next generation of hardware,
 ECX-2000.
 
 clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also
 taken on maintainership of the platform.
 
 Beyond this there has been a bunch of work from a number of people on
 converting more platforms to IRQ domains, pinctrl conversion, cleanup
 and general feature enablement across most of the active platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyLCjAAoJEIwa5zzehBx3AdQP/R+L3+EQMjiEWt/p7g/ql5Em
 0SnP92CcGzrjgLTg9z1FeOazfOsGnkZAYUlDRkqfKobH3VqkhYFFtt1/0x0KMahm
 xcowHgMBOyimFdWT9vLK3J8U6DLui5XrEG9LGH2VL+lqmfjIyP/OOF3mVc0/+pV9
 WTLAsYswdBRSeiNuF43kqlfrOwF6xsPLgiNMlc82w6BzHqoHu6dOif5M9MqWaApS
 V74DPmwLD371Tyit6aHqt3JOqpgiPSHlmxkzomK+5idcW3Pa7HnzzFYmx85dk/eN
 J2siqIkoOu7tEfjIbNZTL2MYoX4tUUKv4qZZ3IOl3YSWaV3P5ilMApF01XVrkk8E
 DWOMhzte9hC7L90W+/kCPLF1VyeAhCem2KQWUitO71fKur3r+3ZaUokNVvWzkJIL
 7aduxAJOV2hfLgEqbjbjF3o4S8p63OV3kzivFJM1And15zDJo4+qqOh67+bPo4jj
 +R4du+SqzXriw4i3tDLGVpdjDffk4D41tbLzgkWAtvGyoP45yeYfHAzAh0pDFPRv
 ASfZVmZ5PhwAUAkIMnpC2sjgmxMYff3SYqmDgnsqXES7rbDH/hG+teymtHFTyUQp
 m+f60DNotSMcMvkLdvruLSB4aeTiwbfOqPn/g+aXYUlPuNMq1fVWgN7EJKWkamK4
 nRwaJmLwx1/ojcVbpy2G
 =YMKB
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...
2012-12-12 12:05:15 -08:00

545 lines
12 KiB
Plaintext

# arch/arm/mach-s3c24xx/Kconfig
#
# Copyright (c) 2012 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
if ARCH_S3C24XX
menu "SAMSUNG S3C24XX SoCs Support"
comment "S3C24XX SoCs"
config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
config CPU_S3C2412
bool "SAMSUNG S3C2412"
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
config CPU_S3C2416
bool "SAMSUNG S3C2416/S3C2450"
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2416_PM if PM
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
help
Support for the S3C2416 SoC from the S3C24XX line
config CPU_S3C2440
bool "SAMSUNG S3C2440"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
help
Support for S3C2440 Samsung Mobile CPU based systems.
config CPU_S3C2442
bool "SAMSUNG S3C2442"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
help
Support for S3C2442 Samsung Mobile CPU based systems.
config CPU_S3C244X
def_bool y
depends on CPU_S3C2440 || CPU_S3C2442
config CPU_S3C2443
bool "SAMSUNG S3C2443"
depends on ARCH_S3C24XX
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
help
Support for the S3C2443 SoC from the S3C24XX line
# common code
config S3C24XX_SMDK
bool
help
Common machine code for SMDK2410 and SMDK2440
config S3C24XX_SIMTEC_AUDIO
bool
depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
default y
help
Add audio devices for common Simtec S3C24XX boards
config S3C24XX_SIMTEC_PM
bool
help
Common power management code for systems that are
compatible with the Simtec style of power management
config S3C24XX_SIMTEC_USB
bool
help
USB management code for common Simtec S3C24XX boards
config S3C24XX_SETUP_TS
bool
help
Compile in platform device definition for Samsung TouchScreen.
config S3C2410_DMA
bool
depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
default y if CPU_S3C2410 || CPU_S3C2442
help
DMA device selection for S3C2410 and compatible CPUs
config S3C2410_PM
bool
help
Power Management code common to S3C2410 and better
# cpu-specific sections
if CPU_S3C2410
config S3C24XX_SIMTEC_NOR
bool
help
Internal node to specify machine has simtec NOR mapping
config MACH_BAST_IDE
bool
select HAVE_PATA_PLATFORM
help
Internal node for machines with an BAST style IDE
interface
comment "S3C2410 Boards"
#
# The "S3C2410 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_AML_M5900
bool "AML M5900 Series"
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
select S3C2410_IOTIMING if S3C2410_CPUFREQ
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
select S3C_DEV_HWMON
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
config BAST_PC104_IRQ
bool "BAST PC104 IRQ support"
depends on ARCH_BAST
default y
help
Say Y here to enable the PC104 IRQ routing on the
Simtec BAST (EB2410ITX)
config ARCH_H1940
bool "IPAQ H1940"
select PM_H1940 if PM
select S3C24XX_SETUP_TS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
config H1940BT
tristate "Control the state of H1940 bluetooth chip"
depends on ARCH_H1940
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on h1940.
config PM_H1940
bool
help
Internal node for H1940 and related PM
config MACH_N30
bool "Acer N30 family"
select MACH_N35
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config MACH_OTOM
bool "NexVision OTOM Board"
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
config MACH_QT2410
bool "QT2410"
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410
config ARCH_SMDK2410
bool "SMDK2410/A9M2410"
select S3C24XX_SMDK
help
Say Y here if you are using the SMDK2410 or the derived module A9M2410
<http://www.fsforth.de>
config MACH_TCT_HAMMER
bool "TCT Hammer Board"
select S3C_DEV_USB_HOST
help
Say Y here if you are using the TinCanTools Hammer Board
<http://www.tincantools.com>
config MACH_VR1000
bool "Thorcom VR1000"
select MACH_BAST_IDE
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
endif # CPU_S3C2410
config S3C2412_PM_SLEEP
bool
help
Internal config node to apply sleep for S3C2412 power management.
Can be selected by another SoCs such as S3C2416 with similar
sleep procedure.
if CPU_S3C2412
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C24XX && !CPU_S3C2410 && \
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y
config S3C2412_DMA
bool
help
Internal config node for S3C2412 DMA support
config S3C2412_PM
bool
help
Internal config node to apply S3C2412 power management
comment "S3C2412 Boards"
#
# The "S3C2412 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_JIVE
bool "Logitech Jive"
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
config MACH_JIVE_SHOW_BOOTLOADER
bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
depends on MACH_JIVE && EXPERIMENTAL
config MACH_S3C2413
bool
help
Internal node for S3C2413 version of SMDK2413, so that
machine_is_s3c2413() will work when MACH_SMDK2413 is
selected
config MACH_SMDK2412
bool "SMDK2412"
select MACH_SMDK2413
help
Say Y here if you are using an SMDK2412
Note, this shares support with SMDK2413, so will automatically
select MACH_SMDK2413.
config MACH_SMDK2413
bool "SMDK2413"
select MACH_S3C2413
select S3C24XX_SMDK
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
config MACH_VSTMS
bool "VMSTMS"
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board
endif # CPU_S3C2412
if CPU_S3C2416
config S3C2416_PM
bool
select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2416 power management
config S3C2416_SETUP_SDHCI
bool
select S3C2416_SETUP_SDHCI_GPIO
help
Internal helper functions for S3C2416 based SDHCI systems
config S3C2416_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
comment "S3C2416 Boards"
config MACH_SMDK2416
bool "SMDK2416"
select S3C2416_SETUP_SDHCI
select S3C24XX_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2416
endif # CPU_S3C2416
if CPU_S3C2440
config S3C2440_DMA
bool
help
Support for S3C2440 specific DMA code5A
comment "S3C2440 Boards"
#
# The "S3C2440 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select HAVE_PATA_PLATFORM
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA64
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select EEPROM_AT24
select LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_BACKLIGHT
select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C_SETUP_CAMIF
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select S3C2440_XTAL_12000000
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA128
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config MACH_OSIRIS_DVS
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
depends on MACH_OSIRIS
select TPS65010
help
Say Y/M here if you want to have dynamic voltage scaling support
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
The DVS driver alters the voltage supplied to the ARM core
depending on the frequency it is running at. The driver itself
does not do any of the frequency alteration, which is left up
to the cpufreq driver.
config MACH_RX3715
bool "HP iPAQ rx3715"
select PM_H1940 if PM
select S3C2440_XTAL_16934400
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
config ARCH_S3C2440
bool "SMDK2440"
select S3C2440_XTAL_16934400
select S3C24XX_SMDK
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
endif # CPU_S3C2440
if CPU_S3C2442
comment "S3C2442 Boards"
#
# The "S3C2442 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
select I2C
select MACH_NEO1973
select MFD_PCF50633
select PCF50633_GPIO
select POWER_SUPPLY
select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
config MACH_RX1950
bool "HP iPAQ rx1950"
select I2C
select PM_H1940 if PM
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
select S3C24XX_DCLK
select S3C24XX_PWM
select S3C_DEV_NAND
help
Say Y here if you're using HP iPAQ rx1950
config SMDK2440_CPU2442
bool "SMDM2440 with S3C2442 CPU module"
endif # CPU_S3C2440
if CPU_S3C2443 || CPU_S3C2416
config S3C2443_COMMON
bool
help
Common code for the S3C2443 and similar processors, which includes
the S3C2416 and S3C2450.
config S3C2443_DMA
bool
help
Internal config node for S3C2443 DMA support
config S3C2443_SETUP_SPI
bool
help
Common setup code for SPI GPIO configurations
endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443
comment "S3C2443 Boards"
config MACH_SMDK2443
bool "SMDK2443"
select S3C24XX_SMDK
select S3C_DEV_HSMMC1
help
Say Y here if you are using an SMDK2443
endif # CPU_S3C2443
endmenu # SAMSUNG S3C24XX SoCs Support
endif # ARCH_S3C24XX