linux/arch/arm/mach-omap1/clock.h
Paul Walmsley e10dd62ffc ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files
To facilitate the ARM single image work, split
arch/arm/plat-omap/include/plat/clkdev_omap.h into the
arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h files.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-18 16:23:30 -07:00

294 lines
10 KiB
C

/*
* linux/arch/arm/mach-omap1/clock.h
*
* Copyright (C) 2004 - 2005, 2009 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
#include <linux/clk.h>
#include <linux/list.h>
#include <linux/clkdev.h>
struct module;
struct clk;
struct omap_clk {
u16 cpu;
struct clk_lookup lk;
};
#define CLK(dev, con, ck, cp) \
{ \
.cpu = cp, \
.lk = { \
.dev_id = dev, \
.con_id = con, \
.clk = ck, \
}, \
}
/* Platform flags for the clkdev-OMAP integration code */
#define CK_310 (1 << 0)
#define CK_7XX (1 << 1) /* 7xx, 850 */
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
#define CK_1710 (1 << 4) /* 1710 extra for rate selection */
/* Temporary, needed during the common clock framework conversion */
#define __clk_get_name(clk) (clk->name)
#define __clk_get_parent(clk) (clk->parent)
#define __clk_get_rate(clk) (clk->rate)
/**
* struct clkops - some clock function pointers
* @enable: fn ptr that enables the current clock in hardware
* @disable: fn ptr that enables the current clock in hardware
* @find_idlest: function returning the IDLEST register for the clock's IP blk
* @find_companion: function returning the "companion" clk reg for the clock
* @allow_idle: fn ptr that enables autoidle for the current clock in hardware
* @deny_idle: fn ptr that disables autoidle for the current clock in hardware
*
* A "companion" clk is an accompanying clock to the one being queried
* that must be enabled for the IP module connected to the clock to
* become accessible by the hardware. Neither @find_idlest nor
* @find_companion should be needed; that information is IP
* block-specific; the hwmod code has been created to handle this, but
* until hwmod data is ready and drivers have been converted to use PM
* runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
* @find_companion must, unfortunately, remain.
*/
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
void (*find_idlest)(struct clk *, void __iomem **,
u8 *, u8 *);
void (*find_companion)(struct clk *, void __iomem **,
u8 *);
void (*allow_idle)(struct clk *);
void (*deny_idle)(struct clk *);
};
/*
* struct clk.flags possibilities
*
* XXX document the rest of the clock flags here
*
* CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
* bits share the same register. This flag allows the
* omap4_dpllmx*() code to determine which GATE_CTRL bit field
* should be used. This is a temporary solution - a better approach
* would be to associate clock type-specific data with the clock,
* similar to the struct dpll_data approach.
*/
#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
#define CLOCK_IDLE_CONTROL (1 << 1)
#define CLOCK_NO_IDLE_PARENT (1 << 2)
#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
#define CLOCK_CLKOUTX2 (1 << 5)
/**
* struct clk - OMAP struct clk
* @node: list_head connecting this clock into the full clock list
* @ops: struct clkops * for this clock
* @name: the name of the clock in the hardware (used in hwmod data and debug)
* @parent: pointer to this clock's parent struct clk
* @children: list_head connecting to the child clks' @sibling list_heads
* @sibling: list_head connecting this clk to its parent clk's @children
* @rate: current clock rate
* @enable_reg: register to write to enable the clock (see @enable_bit)
* @recalc: fn ptr that returns the clock's current rate
* @set_rate: fn ptr that can change the clock's current rate
* @round_rate: fn ptr that can round the clock's current rate
* @init: fn ptr to do clock-specific initialization
* @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
* @usecount: number of users that have requested this clock to be enabled
* @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
* @flags: see "struct clk.flags possibilities" above
* @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
* @src_offset: bitshift for source selection bitfield (OMAP1 only)
*
* XXX @rate_offset, @src_offset should probably be removed and OMAP1
* clock code converted to use clksel.
*
* XXX @usecount is poorly named. It should be "enable_count" or
* something similar. "users" in the description refers to kernel
* code (core code or drivers) that have called clk_enable() and not
* yet called clk_disable(); the usecount of parent clocks is also
* incremented by the clock code when clk_enable() is called on child
* clocks and decremented by the clock code when clk_disable() is
* called on child clocks.
*
* XXX @clkdm, @usecount, @children, @sibling should be marked for
* internal use only.
*
* @children and @sibling are used to optimize parent-to-child clock
* tree traversals. (child-to-parent traversals use @parent.)
*
* XXX The notion of the clock's current rate probably needs to be
* separated from the clock's target rate.
*/
struct clk {
struct list_head node;
const struct clkops *ops;
const char *name;
struct clk *parent;
struct list_head children;
struct list_head sibling; /* node for children */
unsigned long rate;
void __iomem *enable_reg;
unsigned long (*recalc)(struct clk *);
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*init)(struct clk *);
u8 enable_bit;
s8 usecount;
u8 fixed_div;
u8 flags;
u8 rate_offset;
u8 src_offset;
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
struct dentry *dent; /* For visible tree hierarchy */
#endif
};
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
long (*clk_round_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_parent)(struct clk *clk, struct clk *parent);
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
};
extern int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
extern void propagate_rate(struct clk *clk);
extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
extern struct clk *omap_clk_get_by_name(const char *name);
extern int omap_clk_enable_autoidle_all(void);
extern int omap_clk_disable_autoidle_all(void);
extern const struct clkops clkops_null;
extern struct clk dummy_ck;
int omap1_clk_init(void);
void omap1_clk_late_init(void);
extern int omap1_clk_enable(struct clk *clk);
extern void omap1_clk_disable(struct clk *clk);
extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
extern unsigned long omap1_ckctl_recalc(struct clk *clk);
extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
extern unsigned long omap1_sossi_recalc(struct clk *clk);
extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
extern unsigned long omap1_uart_recalc(struct clk *clk);
extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
extern void omap1_init_ext_clk(struct clk *clk);
extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
extern unsigned long omap1_watchdog_recalc(struct clk *clk);
#ifdef CONFIG_OMAP_RESET_CLOCKS
extern void omap1_clk_disable_unused(struct clk *clk);
#else
#define omap1_clk_disable_unused NULL
#endif
struct uart_clk {
struct clk clk;
unsigned long sysc_addr;
};
/* Provide a method for preventing idling some ARM IDLECT clocks */
struct arm_idlect1_clk {
struct clk clk;
unsigned long no_idle_count;
__u8 idlect_shift;
};
/* ARM_CKCTL bit shifts */
#define CKCTL_PERDIV_OFFSET 0
#define CKCTL_LCDDIV_OFFSET 2
#define CKCTL_ARMDIV_OFFSET 4
#define CKCTL_DSPDIV_OFFSET 6
#define CKCTL_TCDIV_OFFSET 8
#define CKCTL_DSPMMUDIV_OFFSET 10
/*#define ARM_TIMXO 12*/
#define EN_DSPCK 13
/*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */
/* DSP_CKCTL bit shifts */
#define CKCTL_DSPPERDIV_OFFSET 0
/* ARM_IDLECT2 bit shifts */
#define EN_WDTCK 0
#define EN_XORPCK 1
#define EN_PERCK 2
#define EN_LCDCK 3
#define EN_LBCK 4 /* Not on 1610/1710 */
/*#define EN_HSABCK 5*/
#define EN_APICK 6
#define EN_TIMCK 7
#define DMACK_REQ 8
#define EN_GPIOCK 9 /* Not on 1610/1710 */
/*#define EN_LBFREECK 10*/
#define EN_CKOUT_ARM 11
/* ARM_IDLECT3 bit shifts */
#define EN_OCPI_CK 0
#define EN_TC1_CK 2
#define EN_TC2_CK 4
/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
#define EN_DSPTIMCK 5
/* Various register defines for clock controls scattered around OMAP chip */
#define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */
#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */
#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */
#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */
#define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */
#define SWD_CLK_DIV_CTRL_SEL 0xfffe0874
#define COM_CLK_DIV_CTRL_SEL 0xfffe0878
#define SOFT_REQ_REG 0xfffe0834
#define SOFT_REQ_REG2 0xfffe0880
extern __u32 arm_idlect1_mask;
extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
extern const struct clkops clkops_dspck;
extern const struct clkops clkops_dummy;
extern const struct clkops clkops_uart_16xx;
extern const struct clkops clkops_generic;
/* used for passing SoC type to omap1_{select,round_to}_table_rate() */
extern u32 cpu_mask;
#endif