linux/arch/arm/mach-omap2/omap_hwmod_common_data.c
Archit Taneja b923d40dd4 ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Resetting DISPC when a DISPC output is enabled causes the DSS to go into an
inconsistent state. Thus if the bootloader has enabled a display, the hwmod code
cannot reset the DISPC module just like that, but the outputs need to be
disabled first.

Add function dispc_disable_outputs() which disables all active overlay manager
and ensure all frame transfers are completed.

Modify omap_dss_reset() to call this function and clear DSS_CONTROL,
DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the
DSS2 driver starts.

This resolves the hang issue(caused by a L3 error during boot) seen on the
beagle board C3, which has a factory bootloader that enables display. The issue
is resolved with this patch.

Thanks to Tomi and Sricharan for some additional testing.

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: R, Sricharan <r.sricharan@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
[paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed
 cpu_is_omap*() calls and converted to dev_attr]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:46 -07:00

56 lines
1.7 KiB
C

/*
* omap_hwmod common data structures
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
* Benoît Cousson
*
* Copyright (C) 2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This data/structures are to be used while defining OMAP on-chip module
* data and their integration with other OMAP modules and Linux.
*/
#include <plat/omap_hwmod.h>
#include "omap_hwmod_common_data.h"
/**
* struct omap_hwmod_sysc_type1 - TYPE1 sysconfig scheme.
*
* To be used by hwmod structure to specify the sysconfig offsets
* if the device ip is compliant with the original PRCM protocol
* defined for OMAP2420.
*/
struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = {
.midle_shift = SYSC_TYPE1_MIDLEMODE_SHIFT,
.clkact_shift = SYSC_TYPE1_CLOCKACTIVITY_SHIFT,
.sidle_shift = SYSC_TYPE1_SIDLEMODE_SHIFT,
.enwkup_shift = SYSC_TYPE1_ENAWAKEUP_SHIFT,
.srst_shift = SYSC_TYPE1_SOFTRESET_SHIFT,
.autoidle_shift = SYSC_TYPE1_AUTOIDLE_SHIFT,
};
/**
* struct omap_hwmod_sysc_type2 - TYPE2 sysconfig scheme.
*
* To be used by hwmod structure to specify the sysconfig offsets if the
* device ip is compliant with the new PRCM protocol defined for new
* OMAP4 IPs.
*/
struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
.midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT,
.sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT,
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
};
struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
.manager_count = 2,
.has_framedonetv_irq = 0
};