linux/arch/powerpc/include/asm/ucc_fast.h
Stephen Rothwell b8b572e101 powerpc: Move include files to arch/powerpc/include/asm
from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-04 12:02:00 +10:00

245 lines
7.6 KiB
C

/*
* Internal header file for UCC FAST unit routines.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __UCC_FAST_H__
#define __UCC_FAST_H__
#include <linux/kernel.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include "ucc.h"
/* Receive BD's status */
#define R_E 0x80000000 /* buffer empty */
#define R_W 0x20000000 /* wrap bit */
#define R_I 0x10000000 /* interrupt on reception */
#define R_L 0x08000000 /* last */
#define R_F 0x04000000 /* first */
/* transmit BD's status */
#define T_R 0x80000000 /* ready bit */
#define T_W 0x20000000 /* wrap bit */
#define T_I 0x10000000 /* interrupt on completion */
#define T_L 0x08000000 /* last */
/* Rx Data buffer must be 4 bytes aligned in most cases */
#define UCC_FAST_RX_ALIGN 4
#define UCC_FAST_MRBLR_ALIGNMENT 4
#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
/* Sizes */
#define UCC_FAST_URFS_MIN_VAL 0x88
#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
/* ucc_fast_channel_protocol_mode - UCC FAST mode */
enum ucc_fast_channel_protocol_mode {
UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
};
/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
enum ucc_fast_transparent_txrx {
UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
};
/* UCC fast diagnostic mode */
enum ucc_fast_diag_mode {
UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
};
/* UCC fast Sync length (transparent mode only) */
enum ucc_fast_sync_len {
UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
};
/* UCC fast RTS mode */
enum ucc_fast_ready_to_send {
UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
};
/* UCC fast receiver decoding mode */
enum ucc_fast_rx_decoding_method {
UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
};
/* UCC fast transmitter encoding mode */
enum ucc_fast_tx_encoding_method {
UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
};
/* UCC fast CRC length */
enum ucc_fast_transparent_tcrc {
UCC_FAST_16_BIT_CRC = 0x00000000,
UCC_FAST_CRC_RESERVED0 = 0x00000040,
UCC_FAST_32_BIT_CRC = 0x00000080,
UCC_FAST_CRC_RESERVED1 = 0x000000C0
};
/* Fast UCC initialization structure */
struct ucc_fast_info {
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
u32 regs;
int irq;
u32 uccm_mask;
int bd_mem_part;
int brkpt_support;
int grant_support;
int tsa;
int cdp;
int cds;
int ctsp;
int ctss;
int tci;
int txsy;
int rtsm;
int revd;
int rsyn;
u16 max_rx_buf_length;
u16 urfs;
u16 urfet;
u16 urfset;
u16 utfs;
u16 utfet;
u16 utftt;
u16 ufpt;
enum ucc_fast_channel_protocol_mode mode;
enum ucc_fast_transparent_txrx ttx_trx;
enum ucc_fast_tx_encoding_method tenc;
enum ucc_fast_rx_decoding_method renc;
enum ucc_fast_transparent_tcrc tcrc;
enum ucc_fast_sync_len synl;
};
struct ucc_fast_private {
struct ucc_fast_info *uf_info;
struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
u32 __iomem *p_ucce; /* a pointer to the event register in memory. */
u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */
#ifdef CONFIG_UGETH_TX_ON_DEMAND
u16 __iomem *p_utodr; /* pointer to the transmit on demand register */
#endif
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
int stopped_tx; /* Whether channel has been stopped for Tx
(STOP_TX, etc.) */
int stopped_rx; /* Whether channel has been stopped for Rx */
u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
virtual fifo */
u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
virtual fifo */
#ifdef STATISTICS
u32 tx_frames; /* Transmitted frames counter. */
u32 rx_frames; /* Received frames counter (only frames
passed to application). */
u32 tx_discarded; /* Discarded tx frames counter (frames that
were discarded by the driver due to errors).
*/
u32 rx_discarded; /* Discarded rx frames counter (frames that
were discarded by the driver due to errors).
*/
#endif /* STATISTICS */
u16 mrblr; /* maximum receive buffer length */
};
/* ucc_fast_init
* Initializes Fast UCC according to user provided parameters.
*
* uf_info - (In) pointer to the fast UCC info structure.
* uccf_ret - (Out) pointer to the fast UCC structure.
*/
int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
/* ucc_fast_free
* Frees all resources for fast UCC.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_free(struct ucc_fast_private * uccf);
/* ucc_fast_enable
* Enables a fast UCC port.
* This routine enables Tx and/or Rx through the General UCC Mode Register.
*
* uccf - (In) pointer to the fast UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
/* ucc_fast_disable
* Disables a fast UCC port.
* This routine disables Tx and/or Rx through the General UCC Mode Register.
*
* uccf - (In) pointer to the fast UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
/* ucc_fast_irq
* Handles interrupts on fast UCC.
* Called from the general interrupt routine to handle interrupts on fast UCC.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_irq(struct ucc_fast_private * uccf);
/* ucc_fast_transmit_on_demand
* Immediately forces a poll of the transmitter for data to be sent.
* Typically, the hardware performs a periodic poll for data that the
* transmit routine has set up to be transmitted. In cases where
* this polling cycle is not soon enough, this optional routine can
* be invoked to force a poll right away, instead. Proper use for
* each transmission for which this functionality is desired is to
* call the transmit routine and then this routine right after.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
#endif /* __UCC_FAST_H__ */