linux/arch/powerpc/boot/dts/mpc834x_mds.dts
Peter Korsgaard 33799e3379 [POWERPC] spi: Use fsl_spi instead of mpc83xx_spi
According to booting-without-of.txt, compatible should be "fsl_spi" and
mode "cpu" or "qe" for the fsl SPI controllers.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:17 -05:00

339 lines
7.6 KiB
Plaintext

/*
* MPC8349E MDS Device Tree Source
*
* Copyright 2005, 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8349EMDS";
compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8349@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <00000000 10000000>; // 256MB at 0
};
bcsr@e2400000 {
device_type = "board-control";
reg = <e2400000 8000>;
};
soc8349@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <200 100>;
};
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = < &ipic >;
dfsrr;
};
i2c@3100 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
interrupt-parent = < &ipic >;
dfsrr;
};
spi@7000 {
device_type = "spi";
compatible = "fsl_spi";
reg = <7000 1000>;
interrupts = <10 8>;
interrupt-parent = < &ipic >;
mode = "cpu";
};
/* phy type (ULPI or SERIAL) are only types supportted for MPH */
/* port = 0 or 1 */
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <27 8>;
phy_type = "ulpi";
port1;
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = < &ipic >;
interrupts = <26 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
interrupt-parent = < &ipic >;
interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
/*
* address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
interrupt-parent = < &ipic >;
phy-handle = < &phy0 >;
linux,network-index = <0>;
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
/*
* address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
interrupt-parent = < &ipic >;
phy-handle = < &phy1 >;
linux,network-index = <1>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
interrupt-parent = < &ipic >;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
interrupt-parent = < &ipic >;
};
/* May need to remove if on a part without crypto engine */
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
/* desc mask is for rev2.0,
* we need runtime fixup for >2.0 */
descriptor-types-mask = <01010ebf>;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <700 100>;
device_type = "ipic";
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pci@e0008600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
42000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e2100000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008600 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};