system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-10-26 13:19:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
linux/drivers/ide/pci/pdc202xx_old.c
Bartlomiej Zolnierkiewicz 3b2a5c7149 ide: filter out "default" transfer mode values in set_xfer_rate() 
* Filter out "default" transfer mode values (0x00 - default PIO mode,
  0x01 - default PIO mode w/ IORDY disabled) in write handler for obsoleted
  /proc/ide/hd?/settings:current_speed setting.

  Allowing "default" transfer mode values is a dangerous thing to do as
  we don't support programming controller to the "default" transfer mode
  and devices often use different values for the default and maximum PIO
  mode (i.e. PIO2 default and PIO4 maximum) so the controller will stay
  programmed for higher PIO mode while device will use the lower PIO mode.

  There is no functionality loss as by using special IOCTLs device can
  still be programmed to "default" transfer modes (it is only useful for
  debugging/testing purposes anyway).

* Remove no longer needed IDE_HFLAG_ABUSE_SET_DMA_MODE host flag, it was
  previously used by few host drivers to program the controller to PIO0
  timings for "default" transfer mode == 0x01 (although some host drivers
  would program invalid PIO timings instead).

* Cleanup ide_set_xfer_rate() and add BUG_ON().

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:56 +02:00

444 lines
12 KiB
C
Raw Blame History

/*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* Portions Copyright (C) 1999 Promise Technology, Inc.
* Author: Frank Tiernan (frankt@promise.com)
* Released under terms of General Public License
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <asm/io.h>
#define PDC202XX_DEBUG_DRIVE_INFO 0
static const char *pdc_quirk_drives[] = {
"QUANTUM FIREBALLlct08 08",
"QUANTUM FIREBALLP KA6.4",
"QUANTUM FIREBALLP KA9.1",
"QUANTUM FIREBALLP LM20.4",
"QUANTUM FIREBALLP KX13.6",
"QUANTUM FIREBALLP KX20.5",
"QUANTUM FIREBALLP KX27.3",
"QUANTUM FIREBALLP LM20.5",
NULL
};
static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 drive_pci = 0x60 + (drive->dn << 2);
u8 AP = 0, BP = 0, CP = 0;
u8 TA = 0, TB = 0, TC = 0;
#if PDC202XX_DEBUG_DRIVE_INFO
u32 drive_conf = 0;
pci_read_config_dword(dev, drive_pci, &drive_conf);
#endif
/*
* TODO: do this once per channel
*/
if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
pdc_old_disable_66MHz_clock(hwif);
pci_read_config_byte(dev, drive_pci, &AP);
pci_read_config_byte(dev, drive_pci + 1, &BP);
pci_read_config_byte(dev, drive_pci + 2, &CP);
switch(speed) {
case XFER_UDMA_5:
case XFER_UDMA_4: TB = 0x20; TC = 0x01; break;
case XFER_UDMA_2: TB = 0x20; TC = 0x01; break;
case XFER_UDMA_3:
case XFER_UDMA_1: TB = 0x40; TC = 0x02; break;
case XFER_UDMA_0:
case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break;
case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break;
case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break;
case XFER_PIO_4: TA = 0x01; TB = 0x04; break;
case XFER_PIO_3: TA = 0x02; TB = 0x06; break;
case XFER_PIO_2: TA = 0x03; TB = 0x08; break;
case XFER_PIO_1: TA = 0x05; TB = 0x0C; break;
case XFER_PIO_0:
default: TA = 0x09; TB = 0x13; break;
}
if (speed < XFER_SW_DMA_0) {
/*
* preserve SYNC_INT / ERDDY_EN bits while clearing
* Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
*/
AP &= ~0x3f;
if (drive->id->capability & 4)
AP |= 0x20; /* set IORDY_EN bit */
if (drive->media == ide_disk)
AP |= 0x10; /* set Prefetch_EN bit */
/* clear PB[4:0] bits of register B */
BP &= ~0x1f;
pci_write_config_byte(dev, drive_pci, AP | TA);
pci_write_config_byte(dev, drive_pci + 1, BP | TB);
} else {
/* clear MB[2:0] bits of register B */
BP &= ~0xe0;
/* clear MC[3:0] bits of register C */
CP &= ~0x0f;
pci_write_config_byte(dev, drive_pci + 1, BP | TB);
pci_write_config_byte(dev, drive_pci + 2, CP | TC);
}
#if PDC202XX_DEBUG_DRIVE_INFO
printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
drive->name, ide_xfer_verbose(speed),
drive->dn, drive_conf);
pci_read_config_dword(dev, drive_pci, &drive_conf);
printk("0x%08x\n", drive_conf);
#endif
}
static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
}
static u8 __devinit pdc2026x_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
pci_read_config_word(dev, 0x50, &CIS);
return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
/*
* Set the control register to use the 66MHz system
* clock for UDMA 3/4/5 mode operation when necessary.
*
* FIXME: this register is shared by both channels, some locking is needed
*
* It may also be possible to leave the 66MHz clock on
* and readjust the timing parameters.
*/
static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
{
unsigned long clock_reg = hwif->extra_base + 0x01;
u8 clock = inb(clock_reg);
outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
}
static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
{
unsigned long clock_reg = hwif->extra_base + 0x01;
u8 clock = inb(clock_reg);
outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
}
static void pdc202xx_quirkproc(ide_drive_t *drive)
{
const char **list, *model = drive->id->model;
for (list = pdc_quirk_drives; *list != NULL; list++)
if (strstr(model, *list) != NULL) {
drive->quirk_list = 2;
return;
}
drive->quirk_list = 0;
}
static void pdc202xx_dma_start(ide_drive_t *drive)
{
if (drive->current_speed > XFER_UDMA_2)
pdc_old_enable_66MHz_clock(drive->hwif);
if (drive->media != ide_disk || drive->addressing == 1) {
struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u32 word_count = 0;
u8 clock = inb(high_16 + 0x11);
outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
word_count = (rq->nr_sectors << 8);
word_count = (rq_data_dir(rq) == READ) ?
word_count | 0x05000000 :
word_count | 0x06000000;
outl(word_count, atapi_reg);
}
ide_dma_start(drive);
}
static int pdc202xx_dma_end(ide_drive_t *drive)
{
if (drive->media != ide_disk || drive->addressing == 1) {
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u8 clock = 0;
outl(0, atapi_reg); /* zero out extra */
clock = inb(high_16 + 0x11);
outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11);
}
if (drive->current_speed > XFER_UDMA_2)
pdc_old_disable_66MHz_clock(drive->hwif);
return __ide_dma_end(drive);
}
static int pdc202xx_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->extra_base - 16;
u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
u8 sc1d = inb(high_16 + 0x001d);
if (hwif->channel) {
/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
if ((sc1d & 0x50) == 0x50)
goto somebody_else;
else if ((sc1d & 0x40) == 0x40)
return (dma_stat & 4) == 4;
} else {
/* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
if ((sc1d & 0x05) == 0x05)
goto somebody_else;
else if ((sc1d & 0x04) == 0x04)
return (dma_stat & 4) == 4;
}
somebody_else:
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
}
static void pdc202xx_reset_host (ide_hwif_t *hwif)
{
unsigned long high_16 = hwif->extra_base - 16;
u8 udma_speed_flag = inb(high_16 | 0x001f);
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
mdelay(100);
outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
mdelay(2000); /* 2 seconds ?! */
printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
hwif->channel ? "Secondary" : "Primary");
}
static void pdc202xx_reset (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
ide_hwif_t *mate = hwif->mate;
pdc202xx_reset_host(hwif);
pdc202xx_reset_host(mate);
ide_set_max_pio(drive);
}
static void pdc202xx_dma_lost_irq(ide_drive_t *drive)
{
pdc202xx_reset(drive);
ide_dma_lost_irq(drive);
}
static void pdc202xx_dma_timeout(ide_drive_t *drive)
{
pdc202xx_reset(drive);
ide_dma_timeout(drive);
}
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
const char *name)
{
unsigned long dmabase = pci_resource_start(dev, 4);
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
if (dmabase == 0)
goto out;
udma_speed_flag = inb(dmabase | 0x1f);
primary_mode = inb(dmabase | 0x1a);
secondary_mode = inb(dmabase | 0x1b);
printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \
"Primary %s Mode " \
"Secondary %s Mode.\n", pci_name(dev),
(udma_speed_flag & 1) ? "EN" : "DIS",
(primary_mode & 1) ? "MASTER" : "PCI",
(secondary_mode & 1) ? "MASTER" : "PCI" );
if (!(udma_speed_flag & 1)) {
printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
pci_name(dev), udma_speed_flag,
(udma_speed_flag|1));
outb(udma_speed_flag | 1, dmabase | 0x1f);
printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN");
}
out:
return dev->irq;
}
static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
const char *name)
{
if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) {
u8 irq = 0, irq2 = 0;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
/* 0xbc */
pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2);
if (irq != irq2) {
pci_write_config_byte(dev,
(PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */
printk(KERN_INFO "%s: PCI config space interrupt "
"mirror fixed\n", name);
}
}
}
#define IDE_HFLAGS_PDC202XX \
(IDE_HFLAG_ERROR_STOPS_FIFO | \
IDE_HFLAG_OFF_BOARD)
static const struct ide_port_ops pdc20246_port_ops = {
.set_pio_mode = pdc202xx_set_pio_mode,
.set_dma_mode = pdc202xx_set_mode,
.quirkproc = pdc202xx_quirkproc,
};
static const struct ide_port_ops pdc2026x_port_ops = {
.set_pio_mode = pdc202xx_set_pio_mode,
.set_dma_mode = pdc202xx_set_mode,
.quirkproc = pdc202xx_quirkproc,
.resetproc = pdc202xx_reset,
.cable_detect = pdc2026x_cable_detect,
};
static const struct ide_dma_ops pdc20246_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
.dma_end = __ide_dma_end,
.dma_test_irq = pdc202xx_dma_test_irq,
.dma_lost_irq = pdc202xx_dma_lost_irq,
.dma_timeout = pdc202xx_dma_timeout,
};
static const struct ide_dma_ops pdc2026x_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = pdc202xx_dma_start,
.dma_end = pdc202xx_dma_end,
.dma_test_irq = pdc202xx_dma_test_irq,
.dma_lost_irq = pdc202xx_dma_lost_irq,
.dma_timeout = pdc202xx_dma_timeout,
};
#define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \
{ \
.name = name_str, \
.init_chipset = init_chipset_pdc202xx, \
.port_ops = &pdc2026x_port_ops, \
.dma_ops = &pdc2026x_dma_ops, \
.host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
}
static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
{ /* 0 */
.name = "PDC20246",
.init_chipset = init_chipset_pdc202xx,
.port_ops = &pdc20246_port_ops,
.dma_ops = &pdc20246_dma_ops,
.host_flags = IDE_HFLAGS_PDC202XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
},
/* 1 */ DECLARE_PDC2026X_DEV("PDC20262", ATA_UDMA4, 0),
/* 2 */ DECLARE_PDC2026X_DEV("PDC20263", ATA_UDMA4, 0),
/* 3 */ DECLARE_PDC2026X_DEV("PDC20265", ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
/* 4 */ DECLARE_PDC2026X_DEV("PDC20267", ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
};
/**
* pdc202xx_init_one - called when a PDC202xx is found
* @dev: the pdc202xx device
* @id: the matching pci id
*
* Called when the PCI registration layer (or the IDE initialization)
* finds a device matching our IDE device tables.
*/
static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct ide_port_info *d;
u8 idx = id->driver_data;
d = &pdc202xx_chipsets[idx];
if (idx < 3)
pdc202ata4_fixup_irq(dev, d->name);
if (idx == 3) {
struct pci_dev *bridge = dev->bus->self;
if (bridge &&
bridge->vendor == PCI_VENDOR_ID_INTEL &&
(bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
printk(KERN_INFO "ide: Skipping Promise PDC20265 "
"attached to I2O RAID controller\n");
return -ENODEV;
}
}
return ide_setup_pci_device(dev, d);
}
static const struct pci_device_id pdc202xx_pci_tbl[] = {
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 2 },
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 3 },
{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 4 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
static struct pci_driver driver = {
.name = "Promise_Old_IDE",
.id_table = pdc202xx_pci_tbl,
.probe = pdc202xx_init_one,
};
static int __init pdc202xx_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(pdc202xx_ide_init);
MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink