linux/drivers/acpi/processor_idle.c
Mario Limonciello 65ea8f2c6e ACPI: processor idle: Fix up C-state latency if not ordered
Generally, the C-state latency is provided by the _CST method or
FADT, but some OEM platforms using AMD Picasso, Renoir, Van Gogh,
and Cezanne set the C2 latency greater than C3's which causes the
C2 state to be skipped.

That will block the core entering PC6, which prevents S0ix working
properly on Linux systems.

In other operating systems, the latency values are not validated and
this does not cause problems by skipping states.

To avoid this issue on Linux, detect when latencies are not an
arithmetic progression and sort them.

Link: 026d186e45
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_712174
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-05-17 17:05:30 +02:00

1407 lines
35 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* processor_idle - idle state submodule to the ACPI processor driver
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* - Added processor hotplug support
* Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
* - Added support for C3 on SMP
*/
#define pr_fmt(fmt) "ACPI: " fmt
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/sched.h> /* need_resched() */
#include <linux/sort.h>
#include <linux/tick.h>
#include <linux/cpuidle.h>
#include <linux/cpu.h>
#include <acpi/processor.h>
/*
* Include the apic definitions for x86 to have the APIC timer related defines
* available also for UP (on SMP it gets magically included via linux/smp.h).
* asm/acpi.h is not an option, as it would require more include magic. Also
* creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
*/
#ifdef CONFIG_X86
#include <asm/apic.h>
#include <asm/cpu.h>
#endif
#define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
module_param(max_cstate, uint, 0000);
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
static int bm_check_disable __read_mostly;
module_param(bm_check_disable, uint, 0000);
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
struct cpuidle_driver acpi_idle_driver = {
.name = "acpi_idle",
.owner = THIS_MODULE,
};
#ifdef CONFIG_ACPI_PROCESSOR_CSTATE
static
DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate);
static int disabled_by_idle_boot_param(void)
{
return boot_option_idle_override == IDLE_POLL ||
boot_option_idle_override == IDLE_HALT;
}
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
* For now disable this. Probably a bug somewhere else.
*
* To skip this limit, boot/load with a large max_cstate limit.
*/
static int set_max_cstate(const struct dmi_system_id *id)
{
if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
return 0;
pr_notice("%s detected - limiting to C%ld max_cstate."
" Override with \"processor.max_cstate=%d\"\n", id->ident,
(long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
max_cstate = (long)id->driver_data;
return 0;
}
static const struct dmi_system_id processor_power_dmi_table[] = {
{ set_max_cstate, "Clevo 5600D", {
DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
(void *)2},
{ set_max_cstate, "Pavilion zv5000", {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
(void *)1},
{ set_max_cstate, "Asus L8400B", {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
(void *)1},
{},
};
/*
* Callers should disable interrupts before the call and enable
* interrupts after return.
*/
static void __cpuidle acpi_safe_halt(void)
{
if (!tif_need_resched()) {
safe_halt();
local_irq_disable();
}
}
#ifdef ARCH_APICTIMER_STOPS_ON_C3
/*
* Some BIOS implementations switch to C3 in the published C2 state.
* This seems to be a common problem on AMD boxen, but other vendors
* are affected too. We pick the most conservative approach: we assume
* that the local APIC stops in both C2 and C3.
*/
static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
struct acpi_processor_power *pwr = &pr->power;
u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
return;
if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E))
type = ACPI_STATE_C1;
/*
* Check, if one of the previous states already marked the lapic
* unstable
*/
if (pwr->timer_broadcast_on_state < state)
return;
if (cx->type >= type)
pr->power.timer_broadcast_on_state = state;
}
static void __lapic_timer_propagate_broadcast(void *arg)
{
struct acpi_processor *pr = (struct acpi_processor *) arg;
if (pr->power.timer_broadcast_on_state < INT_MAX)
tick_broadcast_enable();
else
tick_broadcast_disable();
}
static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
{
smp_call_function_single(pr->id, __lapic_timer_propagate_broadcast,
(void *)pr, 1);
}
/* Power(C) State timer broadcast control */
static bool lapic_timer_needs_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
return cx - pr->power.states >= pr->power.timer_broadcast_on_state;
}
#else
static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cstate) { }
static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
static bool lapic_timer_needs_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
return false;
}
#endif
#if defined(CONFIG_X86)
static void tsc_check_state(int state)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_HYGON:
case X86_VENDOR_AMD:
case X86_VENDOR_INTEL:
case X86_VENDOR_CENTAUR:
case X86_VENDOR_ZHAOXIN:
/*
* AMD Fam10h TSC will tick in all
* C/P/S0/S1 states when this bit is set.
*/
if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
return;
fallthrough;
default:
/* TSC could halt in idle, so notify users */
if (state > ACPI_STATE_C1)
mark_tsc_unstable("TSC halts in idle");
}
}
#else
static void tsc_check_state(int state) { return; }
#endif
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{
if (!pr->pblk)
return -ENODEV;
/* if info is obtained from pblk/fadt, type equals state */
pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
#ifndef CONFIG_HOTPLUG_CPU
/*
* Check for P_LVL2_UP flag before entering C2 and above on
* an SMP system.
*/
if ((num_online_cpus() > 1) &&
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
return -ENODEV;
#endif
/* determine C2 and C3 address from pblk */
pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
/* determine latencies from FADT */
pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
/*
* FADT specified C2 latency must be less than or equal to
* 100 microseconds.
*/
if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
acpi_handle_debug(pr->handle, "C2 latency too large [%d]\n",
acpi_gbl_FADT.c2_latency);
/* invalidate C2 */
pr->power.states[ACPI_STATE_C2].address = 0;
}
/*
* FADT supplied C3 latency must be less than or equal to
* 1000 microseconds.
*/
if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
acpi_handle_debug(pr->handle, "C3 latency too large [%d]\n",
acpi_gbl_FADT.c3_latency);
/* invalidate C3 */
pr->power.states[ACPI_STATE_C3].address = 0;
}
acpi_handle_debug(pr->handle, "lvl2[0x%08x] lvl3[0x%08x]\n",
pr->power.states[ACPI_STATE_C2].address,
pr->power.states[ACPI_STATE_C3].address);
snprintf(pr->power.states[ACPI_STATE_C2].desc,
ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x",
pr->power.states[ACPI_STATE_C2].address);
snprintf(pr->power.states[ACPI_STATE_C3].desc,
ACPI_CX_DESC_LEN, "ACPI P_LVL3 IOPORT 0x%x",
pr->power.states[ACPI_STATE_C3].address);
return 0;
}
static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
{
if (!pr->power.states[ACPI_STATE_C1].valid) {
/* set the first C-State to C1 */
/* all processors need to support C1 */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
pr->power.states[ACPI_STATE_C1].valid = 1;
pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
snprintf(pr->power.states[ACPI_STATE_C1].desc,
ACPI_CX_DESC_LEN, "ACPI HLT");
}
/* the C0 state only exists as a filler in our array */
pr->power.states[ACPI_STATE_C0].valid = 1;
return 0;
}
static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
{
int ret;
if (nocst)
return -ENODEV;
ret = acpi_processor_evaluate_cst(pr->handle, pr->id, &pr->power);
if (ret)
return ret;
if (!pr->power.count)
return -EFAULT;
pr->flags.has_cst = 1;
return 0;
}
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
static int bm_check_flag = -1;
static int bm_control_flag = -1;
if (!cx->address)
return;
/*
* PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
* DMA transfers are used by any ISA device to avoid livelock.
* Note that we could disable Type-F DMA (as recommended by
* the erratum), but this is known to disrupt certain ISA
* devices thus we take the conservative approach.
*/
else if (errata.piix4.fdma) {
acpi_handle_debug(pr->handle,
"C3 not supported on PIIX4 with Type-F DMA\n");
return;
}
/* All the logic here assumes flags.bm_check is same across all CPUs */
if (bm_check_flag == -1) {
/* Determine whether bm_check is needed based on CPU */
acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
bm_check_flag = pr->flags.bm_check;
bm_control_flag = pr->flags.bm_control;
} else {
pr->flags.bm_check = bm_check_flag;
pr->flags.bm_control = bm_control_flag;
}
if (pr->flags.bm_check) {
if (!pr->flags.bm_control) {
if (pr->flags.has_cst != 1) {
/* bus mastering control is necessary */
acpi_handle_debug(pr->handle,
"C3 support requires BM control\n");
return;
} else {
/* Here we enter C3 without bus mastering */
acpi_handle_debug(pr->handle,
"C3 support without BM control\n");
}
}
} else {
/*
* WBINVD should be set in fadt, for C3 state to be
* supported on when bm_check is not required.
*/
if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
acpi_handle_debug(pr->handle,
"Cache invalidation should work properly"
" for C3 to be enabled on SMP systems\n");
return;
}
}
/*
* Otherwise we've met all of our C3 requirements.
* Normalize the C3 latency to expidite policy. Enable
* checking of bus mastering status (bm_check) so we can
* use this in our C3 policy
*/
cx->valid = 1;
/*
* On older chipsets, BM_RLD needs to be set
* in order for Bus Master activity to wake the
* system from C3. Newer chipsets handle DMA
* during C3 automatically and BM_RLD is a NOP.
* In either case, the proper way to
* handle BM_RLD is to set it and leave it set.
*/
acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
return;
}
static int acpi_cst_latency_cmp(const void *a, const void *b)
{
const struct acpi_processor_cx *x = a, *y = b;
if (!(x->valid && y->valid))
return 0;
if (x->latency > y->latency)
return 1;
if (x->latency < y->latency)
return -1;
return 0;
}
static void acpi_cst_latency_swap(void *a, void *b, int n)
{
struct acpi_processor_cx *x = a, *y = b;
u32 tmp;
if (!(x->valid && y->valid))
return;
tmp = x->latency;
x->latency = y->latency;
y->latency = tmp;
}
static int acpi_processor_power_verify(struct acpi_processor *pr)
{
unsigned int i;
unsigned int working = 0;
unsigned int last_latency = 0;
unsigned int last_type = 0;
bool buggy_latency = false;
pr->power.timer_broadcast_on_state = INT_MAX;
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
struct acpi_processor_cx *cx = &pr->power.states[i];
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
break;
case ACPI_STATE_C2:
if (!cx->address)
break;
cx->valid = 1;
break;
case ACPI_STATE_C3:
acpi_processor_power_verify_c3(pr, cx);
break;
}
if (!cx->valid)
continue;
if (cx->type >= last_type && cx->latency < last_latency)
buggy_latency = true;
last_latency = cx->latency;
last_type = cx->type;
lapic_timer_check_state(i, pr, cx);
tsc_check_state(cx->type);
working++;
}
if (buggy_latency) {
pr_notice("FW issue: working around C-state latencies out of order\n");
sort(&pr->power.states[1], max_cstate,
sizeof(struct acpi_processor_cx),
acpi_cst_latency_cmp,
acpi_cst_latency_swap);
}
lapic_timer_propagate_broadcast(pr);
return (working);
}
static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
{
unsigned int i;
int result;
/* NOTE: the idle thread may not be running while calling
* this function */
/* Zero initialize all the C-states info. */
memset(pr->power.states, 0, sizeof(pr->power.states));
result = acpi_processor_get_power_info_cst(pr);
if (result == -ENODEV)
result = acpi_processor_get_power_info_fadt(pr);
if (result)
return result;
acpi_processor_get_power_info_default(pr);
pr->power.count = acpi_processor_power_verify(pr);
/*
* if one state of type C2 or C3 is available, mark this
* CPU as being "idle manageable"
*/
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
if (pr->power.states[i].valid) {
pr->power.count = i;
pr->flags.power = 1;
}
}
return 0;
}
/**
* acpi_idle_bm_check - checks if bus master activity was detected
*/
static int acpi_idle_bm_check(void)
{
u32 bm_status = 0;
if (bm_check_disable)
return 0;
acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status)
acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
/*
* PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
* the true state of bus mastering activity; forcing us to
* manually check the BMIDEA bit of each IDE channel.
*/
else if (errata.piix4.bmisx) {
if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
|| (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
bm_status = 1;
}
return bm_status;
}
static void wait_for_freeze(void)
{
#ifdef CONFIG_X86
/* No delay is needed if we are in guest */
if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
return;
#endif
/* Dummy wait op - must do something useless after P_LVL2 read
because chipsets cannot guarantee that STPCLK# signal
gets asserted in time to freeze execution properly. */
inl(acpi_gbl_FADT.xpm_timer_block.address);
}
/**
* acpi_idle_do_entry - enter idle state using the appropriate method
* @cx: cstate data
*
* Caller disables interrupt before call and enables interrupt after return.
*/
static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx)
{
if (cx->entry_method == ACPI_CSTATE_FFH) {
/* Call into architectural FFH based C-state */
acpi_processor_ffh_cstate_enter(cx);
} else if (cx->entry_method == ACPI_CSTATE_HALT) {
acpi_safe_halt();
} else {
/* IO port based C-state */
inb(cx->address);
wait_for_freeze();
}
}
/**
* acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining)
* @dev: the target CPU
* @index: the index of suggested state
*/
static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
{
struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
ACPI_FLUSH_CPU_CACHE();
while (1) {
if (cx->entry_method == ACPI_CSTATE_HALT)
safe_halt();
else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
inb(cx->address);
wait_for_freeze();
} else
return -ENODEV;
#if defined(CONFIG_X86) && defined(CONFIG_HOTPLUG_CPU)
cond_wakeup_cpu0();
#endif
}
/* Never reached */
return 0;
}
static bool acpi_idle_fallback_to_c1(struct acpi_processor *pr)
{
return IS_ENABLED(CONFIG_HOTPLUG_CPU) && !pr->flags.has_cst &&
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED);
}
static int c3_cpu_count;
static DEFINE_RAW_SPINLOCK(c3_lock);
/**
* acpi_idle_enter_bm - enters C3 with proper BM handling
* @drv: cpuidle driver
* @pr: Target processor
* @cx: Target state context
* @index: index of target state
*/
static int acpi_idle_enter_bm(struct cpuidle_driver *drv,
struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int index)
{
static struct acpi_processor_cx safe_cx = {
.entry_method = ACPI_CSTATE_HALT,
};
/*
* disable bus master
* bm_check implies we need ARB_DIS
* bm_control implies whether we can do ARB_DIS
*
* That leaves a case where bm_check is set and bm_control is not set.
* In that case we cannot do much, we enter C3 without doing anything.
*/
bool dis_bm = pr->flags.bm_control;
/* If we can skip BM, demote to a safe state. */
if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
dis_bm = false;
index = drv->safe_state_index;
if (index >= 0) {
cx = this_cpu_read(acpi_cstate[index]);
} else {
cx = &safe_cx;
index = -EBUSY;
}
}
if (dis_bm) {
raw_spin_lock(&c3_lock);
c3_cpu_count++;
/* Disable bus master arbitration when all CPUs are in C3 */
if (c3_cpu_count == num_online_cpus())
acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
raw_spin_unlock(&c3_lock);
}
rcu_idle_enter();
acpi_idle_do_entry(cx);
rcu_idle_exit();
/* Re-enable bus master arbitration */
if (dis_bm) {
raw_spin_lock(&c3_lock);
acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
c3_cpu_count--;
raw_spin_unlock(&c3_lock);
}
return index;
}
static int acpi_idle_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
struct acpi_processor *pr;
pr = __this_cpu_read(processors);
if (unlikely(!pr))
return -EINVAL;
if (cx->type != ACPI_STATE_C1) {
if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check)
return acpi_idle_enter_bm(drv, pr, cx, index);
/* C2 to C1 demotion. */
if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) {
index = ACPI_IDLE_STATE_START;
cx = per_cpu(acpi_cstate[index], dev->cpu);
}
}
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
acpi_idle_do_entry(cx);
return index;
}
static int acpi_idle_enter_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
if (cx->type == ACPI_STATE_C3) {
struct acpi_processor *pr = __this_cpu_read(processors);
if (unlikely(!pr))
return 0;
if (pr->flags.bm_check) {
u8 bm_sts_skip = cx->bm_sts_skip;
/* Don't check BM_STS, do an unconditional ARB_DIS for S2IDLE */
cx->bm_sts_skip = 1;
acpi_idle_enter_bm(drv, pr, cx, index);
cx->bm_sts_skip = bm_sts_skip;
return 0;
} else {
ACPI_FLUSH_CPU_CACHE();
}
}
acpi_idle_do_entry(cx);
return 0;
}
static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
struct cpuidle_device *dev)
{
int i, count = ACPI_IDLE_STATE_START;
struct acpi_processor_cx *cx;
struct cpuidle_state *state;
if (max_cstate == 0)
max_cstate = 1;
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
state = &acpi_idle_driver.states[count];
cx = &pr->power.states[i];
if (!cx->valid)
continue;
per_cpu(acpi_cstate[count], dev->cpu) = cx;
if (lapic_timer_needs_broadcast(pr, cx))
state->flags |= CPUIDLE_FLAG_TIMER_STOP;
if (cx->type == ACPI_STATE_C3) {
state->flags |= CPUIDLE_FLAG_TLB_FLUSHED;
if (pr->flags.bm_check)
state->flags |= CPUIDLE_FLAG_RCU_IDLE;
}
count++;
if (count == CPUIDLE_STATE_MAX)
break;
}
if (!count)
return -EINVAL;
return 0;
}
static int acpi_processor_setup_cstates(struct acpi_processor *pr)
{
int i, count;
struct acpi_processor_cx *cx;
struct cpuidle_state *state;
struct cpuidle_driver *drv = &acpi_idle_driver;
if (max_cstate == 0)
max_cstate = 1;
if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) {
cpuidle_poll_state_init(drv);
count = 1;
} else {
count = 0;
}
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
if (!cx->valid)
continue;
state = &drv->states[count];
snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
state->exit_latency = cx->latency;
state->target_residency = cx->latency * latency_factor;
state->enter = acpi_idle_enter;
state->flags = 0;
if (cx->type == ACPI_STATE_C1 || cx->type == ACPI_STATE_C2) {
state->enter_dead = acpi_idle_play_dead;
drv->safe_state_index = count;
}
/*
* Halt-induced C1 is not good for ->enter_s2idle, because it
* re-enables interrupts on exit. Moreover, C1 is generally not
* particularly interesting from the suspend-to-idle angle, so
* avoid C1 and the situations in which we may need to fall back
* to it altogether.
*/
if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr))
state->enter_s2idle = acpi_idle_enter_s2idle;
count++;
if (count == CPUIDLE_STATE_MAX)
break;
}
drv->state_count = count;
if (!count)
return -EINVAL;
return 0;
}
static inline void acpi_processor_cstate_first_run_checks(void)
{
static int first_run;
if (first_run)
return;
dmi_check_system(processor_power_dmi_table);
max_cstate = acpi_processor_cstate_check(max_cstate);
if (max_cstate < ACPI_C_STATES_MAX)
pr_notice("processor limited to max C-state %d\n", max_cstate);
first_run++;
if (nocst)
return;
acpi_processor_claim_cst_control();
}
#else
static inline int disabled_by_idle_boot_param(void) { return 0; }
static inline void acpi_processor_cstate_first_run_checks(void) { }
static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
{
return -ENODEV;
}
static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
struct cpuidle_device *dev)
{
return -EINVAL;
}
static int acpi_processor_setup_cstates(struct acpi_processor *pr)
{
return -EINVAL;
}
#endif /* CONFIG_ACPI_PROCESSOR_CSTATE */
struct acpi_lpi_states_array {
unsigned int size;
unsigned int composite_states_size;
struct acpi_lpi_state *entries;
struct acpi_lpi_state *composite_states[ACPI_PROCESSOR_MAX_POWER];
};
static int obj_get_integer(union acpi_object *obj, u32 *value)
{
if (obj->type != ACPI_TYPE_INTEGER)
return -EINVAL;
*value = obj->integer.value;
return 0;
}
static int acpi_processor_evaluate_lpi(acpi_handle handle,
struct acpi_lpi_states_array *info)
{
acpi_status status;
int ret = 0;
int pkg_count, state_idx = 1, loop;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *lpi_data;
struct acpi_lpi_state *lpi_state;
status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
if (ACPI_FAILURE(status)) {
acpi_handle_debug(handle, "No _LPI, giving up\n");
return -ENODEV;
}
lpi_data = buffer.pointer;
/* There must be at least 4 elements = 3 elements + 1 package */
if (!lpi_data || lpi_data->type != ACPI_TYPE_PACKAGE ||
lpi_data->package.count < 4) {
pr_debug("not enough elements in _LPI\n");
ret = -ENODATA;
goto end;
}
pkg_count = lpi_data->package.elements[2].integer.value;
/* Validate number of power states. */
if (pkg_count < 1 || pkg_count != lpi_data->package.count - 3) {
pr_debug("count given by _LPI is not valid\n");
ret = -ENODATA;
goto end;
}
lpi_state = kcalloc(pkg_count, sizeof(*lpi_state), GFP_KERNEL);
if (!lpi_state) {
ret = -ENOMEM;
goto end;
}
info->size = pkg_count;
info->entries = lpi_state;
/* LPI States start at index 3 */
for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpi_state++) {
union acpi_object *element, *pkg_elem, *obj;
element = &lpi_data->package.elements[loop];
if (element->type != ACPI_TYPE_PACKAGE || element->package.count < 7)
continue;
pkg_elem = element->package.elements;
obj = pkg_elem + 6;
if (obj->type == ACPI_TYPE_BUFFER) {
struct acpi_power_register *reg;
reg = (struct acpi_power_register *)obj->buffer.pointer;
if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)
continue;
lpi_state->address = reg->address;
lpi_state->entry_method =
reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE ?
ACPI_CSTATE_FFH : ACPI_CSTATE_SYSTEMIO;
} else if (obj->type == ACPI_TYPE_INTEGER) {
lpi_state->entry_method = ACPI_CSTATE_INTEGER;
lpi_state->address = obj->integer.value;
} else {
continue;
}
/* elements[7,8] skipped for now i.e. Residency/Usage counter*/
obj = pkg_elem + 9;
if (obj->type == ACPI_TYPE_STRING)
strlcpy(lpi_state->desc, obj->string.pointer,
ACPI_CX_DESC_LEN);
lpi_state->index = state_idx;
if (obj_get_integer(pkg_elem + 0, &lpi_state->min_residency)) {
pr_debug("No min. residency found, assuming 10 us\n");
lpi_state->min_residency = 10;
}
if (obj_get_integer(pkg_elem + 1, &lpi_state->wake_latency)) {
pr_debug("No wakeup residency found, assuming 10 us\n");
lpi_state->wake_latency = 10;
}
if (obj_get_integer(pkg_elem + 2, &lpi_state->flags))
lpi_state->flags = 0;
if (obj_get_integer(pkg_elem + 3, &lpi_state->arch_flags))
lpi_state->arch_flags = 0;
if (obj_get_integer(pkg_elem + 4, &lpi_state->res_cnt_freq))
lpi_state->res_cnt_freq = 1;
if (obj_get_integer(pkg_elem + 5, &lpi_state->enable_parent_state))
lpi_state->enable_parent_state = 0;
}
acpi_handle_debug(handle, "Found %d power states\n", state_idx);
end:
kfree(buffer.pointer);
return ret;
}
/*
* flat_state_cnt - the number of composite LPI states after the process of flattening
*/
static int flat_state_cnt;
/**
* combine_lpi_states - combine local and parent LPI states to form a composite LPI state
*
* @local: local LPI state
* @parent: parent LPI state
* @result: composite LPI state
*/
static bool combine_lpi_states(struct acpi_lpi_state *local,
struct acpi_lpi_state *parent,
struct acpi_lpi_state *result)
{
if (parent->entry_method == ACPI_CSTATE_INTEGER) {
if (!parent->address) /* 0 means autopromotable */
return false;
result->address = local->address + parent->address;
} else {
result->address = parent->address;
}
result->min_residency = max(local->min_residency, parent->min_residency);
result->wake_latency = local->wake_latency + parent->wake_latency;
result->enable_parent_state = parent->enable_parent_state;
result->entry_method = local->entry_method;
result->flags = parent->flags;
result->arch_flags = parent->arch_flags;
result->index = parent->index;
strlcpy(result->desc, local->desc, ACPI_CX_DESC_LEN);
strlcat(result->desc, "+", ACPI_CX_DESC_LEN);
strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN);
return true;
}
#define ACPI_LPI_STATE_FLAGS_ENABLED BIT(0)
static void stash_composite_state(struct acpi_lpi_states_array *curr_level,
struct acpi_lpi_state *t)
{
curr_level->composite_states[curr_level->composite_states_size++] = t;
}
static int flatten_lpi_states(struct acpi_processor *pr,
struct acpi_lpi_states_array *curr_level,
struct acpi_lpi_states_array *prev_level)
{
int i, j, state_count = curr_level->size;
struct acpi_lpi_state *p, *t = curr_level->entries;
curr_level->composite_states_size = 0;
for (j = 0; j < state_count; j++, t++) {
struct acpi_lpi_state *flpi;
if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED))
continue;
if (flat_state_cnt >= ACPI_PROCESSOR_MAX_POWER) {
pr_warn("Limiting number of LPI states to max (%d)\n",
ACPI_PROCESSOR_MAX_POWER);
pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
break;
}
flpi = &pr->power.lpi_states[flat_state_cnt];
if (!prev_level) { /* leaf/processor node */
memcpy(flpi, t, sizeof(*t));
stash_composite_state(curr_level, flpi);
flat_state_cnt++;
continue;
}
for (i = 0; i < prev_level->composite_states_size; i++) {
p = prev_level->composite_states[i];
if (t->index <= p->enable_parent_state &&
combine_lpi_states(p, t, flpi)) {
stash_composite_state(curr_level, flpi);
flat_state_cnt++;
flpi++;
}
}
}
kfree(curr_level->entries);
return 0;
}
static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
{
int ret, i;
acpi_status status;
acpi_handle handle = pr->handle, pr_ahandle;
struct acpi_device *d = NULL;
struct acpi_lpi_states_array info[2], *tmp, *prev, *curr;
if (!osc_pc_lpi_support_confirmed)
return -EOPNOTSUPP;
if (!acpi_has_method(handle, "_LPI"))
return -EINVAL;
flat_state_cnt = 0;
prev = &info[0];
curr = &info[1];
handle = pr->handle;
ret = acpi_processor_evaluate_lpi(handle, prev);
if (ret)
return ret;
flatten_lpi_states(pr, prev, NULL);
status = acpi_get_parent(handle, &pr_ahandle);
while (ACPI_SUCCESS(status)) {
acpi_bus_get_device(pr_ahandle, &d);
handle = pr_ahandle;
if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID))
break;
/* can be optional ? */
if (!acpi_has_method(handle, "_LPI"))
break;
ret = acpi_processor_evaluate_lpi(handle, curr);
if (ret)
break;
/* flatten all the LPI states in this level of hierarchy */
flatten_lpi_states(pr, curr, prev);
tmp = prev, prev = curr, curr = tmp;
status = acpi_get_parent(handle, &pr_ahandle);
}
pr->power.count = flat_state_cnt;
/* reset the index after flattening */
for (i = 0; i < pr->power.count; i++)
pr->power.lpi_states[i].index = i;
/* Tell driver that _LPI is supported. */
pr->flags.has_lpi = 1;
pr->flags.power = 1;
return 0;
}
int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu)
{
return -ENODEV;
}
int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
{
return -ENODEV;
}
/**
* acpi_idle_lpi_enter - enters an ACPI any LPI state
* @dev: the target CPU
* @drv: cpuidle driver containing cpuidle state info
* @index: index of target state
*
* Return: 0 for success or negative value for error
*/
static int acpi_idle_lpi_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
struct acpi_lpi_state *lpi;
pr = __this_cpu_read(processors);
if (unlikely(!pr))
return -EINVAL;
lpi = &pr->power.lpi_states[index];
if (lpi->entry_method == ACPI_CSTATE_FFH)
return acpi_processor_ffh_lpi_enter(lpi);
return -EINVAL;
}
static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
{
int i;
struct acpi_lpi_state *lpi;
struct cpuidle_state *state;
struct cpuidle_driver *drv = &acpi_idle_driver;
if (!pr->flags.has_lpi)
return -EOPNOTSUPP;
for (i = 0; i < pr->power.count && i < CPUIDLE_STATE_MAX; i++) {
lpi = &pr->power.lpi_states[i];
state = &drv->states[i];
snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i);
strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
state->exit_latency = lpi->wake_latency;
state->target_residency = lpi->min_residency;
if (lpi->arch_flags)
state->flags |= CPUIDLE_FLAG_TIMER_STOP;
state->enter = acpi_idle_lpi_enter;
drv->safe_state_index = i;
}
drv->state_count = i;
return 0;
}
/**
* acpi_processor_setup_cpuidle_states- prepares and configures cpuidle
* global state data i.e. idle routines
*
* @pr: the ACPI processor
*/
static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
{
int i;
struct cpuidle_driver *drv = &acpi_idle_driver;
if (!pr->flags.power_setup_done || !pr->flags.power)
return -EINVAL;
drv->safe_state_index = -1;
for (i = ACPI_IDLE_STATE_START; i < CPUIDLE_STATE_MAX; i++) {
drv->states[i].name[0] = '\0';
drv->states[i].desc[0] = '\0';
}
if (pr->flags.has_lpi)
return acpi_processor_setup_lpi_states(pr);
return acpi_processor_setup_cstates(pr);
}
/**
* acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE
* device i.e. per-cpu data
*
* @pr: the ACPI processor
* @dev : the cpuidle device
*/
static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr,
struct cpuidle_device *dev)
{
if (!pr->flags.power_setup_done || !pr->flags.power || !dev)
return -EINVAL;
dev->cpu = pr->id;
if (pr->flags.has_lpi)
return acpi_processor_ffh_lpi_probe(pr->id);
return acpi_processor_setup_cpuidle_cx(pr, dev);
}
static int acpi_processor_get_power_info(struct acpi_processor *pr)
{
int ret;
ret = acpi_processor_get_lpi_info(pr);
if (ret)
ret = acpi_processor_get_cstate_info(pr);
return ret;
}
int acpi_processor_hotplug(struct acpi_processor *pr)
{
int ret = 0;
struct cpuidle_device *dev;
if (disabled_by_idle_boot_param())
return 0;
if (!pr->flags.power_setup_done)
return -ENODEV;
dev = per_cpu(acpi_cpuidle_device, pr->id);
cpuidle_pause_and_lock();
cpuidle_disable_device(dev);
ret = acpi_processor_get_power_info(pr);
if (!ret && pr->flags.power) {
acpi_processor_setup_cpuidle_dev(pr, dev);
ret = cpuidle_enable_device(dev);
}
cpuidle_resume_and_unlock();
return ret;
}
int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
{
int cpu;
struct acpi_processor *_pr;
struct cpuidle_device *dev;
if (disabled_by_idle_boot_param())
return 0;
if (!pr->flags.power_setup_done)
return -ENODEV;
/*
* FIXME: Design the ACPI notification to make it once per
* system instead of once per-cpu. This condition is a hack
* to make the code that updates C-States be called once.
*/
if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
/* Protect against cpu-hotplug */
get_online_cpus();
cpuidle_pause_and_lock();
/* Disable all cpuidle devices */
for_each_online_cpu(cpu) {
_pr = per_cpu(processors, cpu);
if (!_pr || !_pr->flags.power_setup_done)
continue;
dev = per_cpu(acpi_cpuidle_device, cpu);
cpuidle_disable_device(dev);
}
/* Populate Updated C-state information */
acpi_processor_get_power_info(pr);
acpi_processor_setup_cpuidle_states(pr);
/* Enable all cpuidle devices */
for_each_online_cpu(cpu) {
_pr = per_cpu(processors, cpu);
if (!_pr || !_pr->flags.power_setup_done)
continue;
acpi_processor_get_power_info(_pr);
if (_pr->flags.power) {
dev = per_cpu(acpi_cpuidle_device, cpu);
acpi_processor_setup_cpuidle_dev(_pr, dev);
cpuidle_enable_device(dev);
}
}
cpuidle_resume_and_unlock();
put_online_cpus();
}
return 0;
}
static int acpi_processor_registered;
int acpi_processor_power_init(struct acpi_processor *pr)
{
int retval;
struct cpuidle_device *dev;
if (disabled_by_idle_boot_param())
return 0;
acpi_processor_cstate_first_run_checks();
if (!acpi_processor_get_power_info(pr))
pr->flags.power_setup_done = 1;
/*
* Install the idle handler if processor power management is supported.
* Note that we use previously set idle handler will be used on
* platforms that only support C1.
*/
if (pr->flags.power) {
/* Register acpi_idle_driver if not already registered */
if (!acpi_processor_registered) {
acpi_processor_setup_cpuidle_states(pr);
retval = cpuidle_register_driver(&acpi_idle_driver);
if (retval)
return retval;
pr_debug("%s registered with cpuidle\n",
acpi_idle_driver.name);
}
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
per_cpu(acpi_cpuidle_device, pr->id) = dev;
acpi_processor_setup_cpuidle_dev(pr, dev);
/* Register per-cpu cpuidle_device. Cpuidle driver
* must already be registered before registering device
*/
retval = cpuidle_register_device(dev);
if (retval) {
if (acpi_processor_registered == 0)
cpuidle_unregister_driver(&acpi_idle_driver);
return retval;
}
acpi_processor_registered++;
}
return 0;
}
int acpi_processor_power_exit(struct acpi_processor *pr)
{
struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
if (disabled_by_idle_boot_param())
return 0;
if (pr->flags.power) {
cpuidle_unregister_device(dev);
acpi_processor_registered--;
if (acpi_processor_registered == 0)
cpuidle_unregister_driver(&acpi_idle_driver);
}
pr->flags.power_setup_done = 0;
return 0;
}