linux/arch/x86/kernel/umip.c
Brendan Shanks e86c2c8b93 x86/umip: Add emulation (spoofing) for UMIP covered instructions in 64-bit processes as well
Add emulation (spoofing) of the SGDT, SIDT, and SMSW instructions for 64-bit
processes.

Wine users have encountered a number of 64-bit Windows games that use
these instructions (particularly SGDT), and were crashing when run on
UMIP-enabled systems.

Originally-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Brendan Shanks <bshanks@codeweavers.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190905232222.14900-1-bshanks@codeweavers.com
[ Minor edits: capitalization, added 'spoofing' wording. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-10 08:36:16 +02:00

435 lines
14 KiB
C

/*
* umip.c Emulation for instruction protected by the Intel User-Mode
* Instruction Prevention feature
*
* Copyright (c) 2017, Intel Corporation.
* Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
*/
#include <linux/uaccess.h>
#include <asm/umip.h>
#include <asm/traps.h>
#include <asm/insn.h>
#include <asm/insn-eval.h>
#include <linux/ratelimit.h>
#undef pr_fmt
#define pr_fmt(fmt) "umip: " fmt
/** DOC: Emulation for User-Mode Instruction Prevention (UMIP)
*
* The feature User-Mode Instruction Prevention present in recent Intel
* processor prevents a group of instructions (SGDT, SIDT, SLDT, SMSW and STR)
* from being executed with CPL > 0. Otherwise, a general protection fault is
* issued.
*
* Rather than relaying to the user space the general protection fault caused by
* the UMIP-protected instructions (in the form of a SIGSEGV signal), it can be
* trapped and emulate the result of such instructions to provide dummy values.
* This allows to both conserve the current kernel behavior and not reveal the
* system resources that UMIP intends to protect (i.e., the locations of the
* global descriptor and interrupt descriptor tables, the segment selectors of
* the local descriptor table, the value of the task state register and the
* contents of the CR0 register).
*
* This emulation is needed because certain applications (e.g., WineHQ and
* DOSEMU2) rely on this subset of instructions to function.
*
* The instructions protected by UMIP can be split in two groups. Those which
* return a kernel memory address (SGDT and SIDT) and those which return a
* value (SLDT, STR and SMSW).
*
* For the instructions that return a kernel memory address, applications
* such as WineHQ rely on the result being located in the kernel memory space,
* not the actual location of the table. The result is emulated as a hard-coded
* value that, lies close to the top of the kernel memory. The limit for the GDT
* and the IDT are set to zero.
*
* Given that SLDT and STR are not commonly used in programs that run on WineHQ
* or DOSEMU2, they are not emulated.
*
* The instruction smsw is emulated to return the value that the register CR0
* has at boot time as set in the head_32.
*
* Emulation is provided for both 32-bit and 64-bit processes.
*
* Care is taken to appropriately emulate the results when segmentation is
* used. That is, rather than relying on USER_DS and USER_CS, the function
* insn_get_addr_ref() inspects the segment descriptor pointed by the
* registers in pt_regs. This ensures that we correctly obtain the segment
* base address and the address and operand sizes even if the user space
* application uses a local descriptor table.
*/
#define UMIP_DUMMY_GDT_BASE 0xfffffffffffe0000ULL
#define UMIP_DUMMY_IDT_BASE 0xffffffffffff0000ULL
/*
* The SGDT and SIDT instructions store the contents of the global descriptor
* table and interrupt table registers, respectively. The destination is a
* memory operand of X+2 bytes. X bytes are used to store the base address of
* the table and 2 bytes are used to store the limit. In 32-bit processes X
* has a value of 4, in 64-bit processes X has a value of 8.
*/
#define UMIP_GDT_IDT_BASE_SIZE_64BIT 8
#define UMIP_GDT_IDT_BASE_SIZE_32BIT 4
#define UMIP_GDT_IDT_LIMIT_SIZE 2
#define UMIP_INST_SGDT 0 /* 0F 01 /0 */
#define UMIP_INST_SIDT 1 /* 0F 01 /1 */
#define UMIP_INST_SMSW 2 /* 0F 01 /4 */
#define UMIP_INST_SLDT 3 /* 0F 00 /0 */
#define UMIP_INST_STR 4 /* 0F 00 /1 */
const char * const umip_insns[5] = {
[UMIP_INST_SGDT] = "SGDT",
[UMIP_INST_SIDT] = "SIDT",
[UMIP_INST_SMSW] = "SMSW",
[UMIP_INST_SLDT] = "SLDT",
[UMIP_INST_STR] = "STR",
};
#define umip_pr_err(regs, fmt, ...) \
umip_printk(regs, KERN_ERR, fmt, ##__VA_ARGS__)
#define umip_pr_warning(regs, fmt, ...) \
umip_printk(regs, KERN_WARNING, fmt, ##__VA_ARGS__)
/**
* umip_printk() - Print a rate-limited message
* @regs: Register set with the context in which the warning is printed
* @log_level: Kernel log level to print the message
* @fmt: The text string to print
*
* Print the text contained in @fmt. The print rate is limited to bursts of 5
* messages every two minutes. The purpose of this customized version of
* printk() is to print messages when user space processes use any of the
* UMIP-protected instructions. Thus, the printed text is prepended with the
* task name and process ID number of the current task as well as the
* instruction and stack pointers in @regs as seen when entering kernel mode.
*
* Returns:
*
* None.
*/
static __printf(3, 4)
void umip_printk(const struct pt_regs *regs, const char *log_level,
const char *fmt, ...)
{
/* Bursts of 5 messages every two minutes */
static DEFINE_RATELIMIT_STATE(ratelimit, 2 * 60 * HZ, 5);
struct task_struct *tsk = current;
struct va_format vaf;
va_list args;
if (!__ratelimit(&ratelimit))
return;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
printk("%s" pr_fmt("%s[%d] ip:%lx sp:%lx: %pV"), log_level, tsk->comm,
task_pid_nr(tsk), regs->ip, regs->sp, &vaf);
va_end(args);
}
/**
* identify_insn() - Identify a UMIP-protected instruction
* @insn: Instruction structure with opcode and ModRM byte.
*
* From the opcode and ModRM.reg in @insn identify, if any, a UMIP-protected
* instruction that can be emulated.
*
* Returns:
*
* On success, a constant identifying a specific UMIP-protected instruction that
* can be emulated.
*
* -EINVAL on error or when not an UMIP-protected instruction that can be
* emulated.
*/
static int identify_insn(struct insn *insn)
{
/* By getting modrm we also get the opcode. */
insn_get_modrm(insn);
if (!insn->modrm.nbytes)
return -EINVAL;
/* All the instructions of interest start with 0x0f. */
if (insn->opcode.bytes[0] != 0xf)
return -EINVAL;
if (insn->opcode.bytes[1] == 0x1) {
switch (X86_MODRM_REG(insn->modrm.value)) {
case 0:
return UMIP_INST_SGDT;
case 1:
return UMIP_INST_SIDT;
case 4:
return UMIP_INST_SMSW;
default:
return -EINVAL;
}
} else if (insn->opcode.bytes[1] == 0x0) {
if (X86_MODRM_REG(insn->modrm.value) == 0)
return UMIP_INST_SLDT;
else if (X86_MODRM_REG(insn->modrm.value) == 1)
return UMIP_INST_STR;
else
return -EINVAL;
} else {
return -EINVAL;
}
}
/**
* emulate_umip_insn() - Emulate UMIP instructions and return dummy values
* @insn: Instruction structure with operands
* @umip_inst: A constant indicating the instruction to emulate
* @data: Buffer into which the dummy result is stored
* @data_size: Size of the emulated result
* @x86_64: true if process is 64-bit, false otherwise
*
* Emulate an instruction protected by UMIP and provide a dummy result. The
* result of the emulation is saved in @data. The size of the results depends
* on both the instruction and type of operand (register vs memory address).
* The size of the result is updated in @data_size. Caller is responsible
* of providing a @data buffer of at least UMIP_GDT_IDT_BASE_SIZE +
* UMIP_GDT_IDT_LIMIT_SIZE bytes.
*
* Returns:
*
* 0 on success, -EINVAL on error while emulating.
*/
static int emulate_umip_insn(struct insn *insn, int umip_inst,
unsigned char *data, int *data_size, bool x86_64)
{
if (!data || !data_size || !insn)
return -EINVAL;
/*
* These two instructions return the base address and limit of the
* global and interrupt descriptor table, respectively. According to the
* Intel Software Development manual, the base address can be 24-bit,
* 32-bit or 64-bit. Limit is always 16-bit. If the operand size is
* 16-bit, the returned value of the base address is supposed to be a
* zero-extended 24-byte number. However, it seems that a 32-byte number
* is always returned irrespective of the operand size.
*/
if (umip_inst == UMIP_INST_SGDT || umip_inst == UMIP_INST_SIDT) {
u64 dummy_base_addr;
u16 dummy_limit = 0;
/* SGDT and SIDT do not use registers operands. */
if (X86_MODRM_MOD(insn->modrm.value) == 3)
return -EINVAL;
if (umip_inst == UMIP_INST_SGDT)
dummy_base_addr = UMIP_DUMMY_GDT_BASE;
else
dummy_base_addr = UMIP_DUMMY_IDT_BASE;
/*
* 64-bit processes use the entire dummy base address.
* 32-bit processes use the lower 32 bits of the base address.
* dummy_base_addr is always 64 bits, but we memcpy the correct
* number of bytes from it to the destination.
*/
if (x86_64)
*data_size = UMIP_GDT_IDT_BASE_SIZE_64BIT;
else
*data_size = UMIP_GDT_IDT_BASE_SIZE_32BIT;
memcpy(data + 2, &dummy_base_addr, *data_size);
*data_size += UMIP_GDT_IDT_LIMIT_SIZE;
memcpy(data, &dummy_limit, UMIP_GDT_IDT_LIMIT_SIZE);
} else if (umip_inst == UMIP_INST_SMSW) {
unsigned long dummy_value = CR0_STATE;
/*
* Even though the CR0 register has 4 bytes, the number
* of bytes to be copied in the result buffer is determined
* by whether the operand is a register or a memory location.
* If operand is a register, return as many bytes as the operand
* size. If operand is memory, return only the two least
* siginificant bytes of CR0.
*/
if (X86_MODRM_MOD(insn->modrm.value) == 3)
*data_size = insn->opnd_bytes;
else
*data_size = 2;
memcpy(data, &dummy_value, *data_size);
/* STR and SLDT are not emulated */
} else {
return -EINVAL;
}
return 0;
}
/**
* force_sig_info_umip_fault() - Force a SIGSEGV with SEGV_MAPERR
* @addr: Address that caused the signal
* @regs: Register set containing the instruction pointer
*
* Force a SIGSEGV signal with SEGV_MAPERR as the error code. This function is
* intended to be used to provide a segmentation fault when the result of the
* UMIP emulation could not be copied to the user space memory.
*
* Returns: none
*/
static void force_sig_info_umip_fault(void __user *addr, struct pt_regs *regs)
{
struct task_struct *tsk = current;
tsk->thread.cr2 = (unsigned long)addr;
tsk->thread.error_code = X86_PF_USER | X86_PF_WRITE;
tsk->thread.trap_nr = X86_TRAP_PF;
force_sig_fault(SIGSEGV, SEGV_MAPERR, addr);
if (!(show_unhandled_signals && unhandled_signal(tsk, SIGSEGV)))
return;
umip_pr_err(regs, "segfault in emulation. error%x\n",
X86_PF_USER | X86_PF_WRITE);
}
/**
* fixup_umip_exception() - Fixup a general protection fault caused by UMIP
* @regs: Registers as saved when entering the #GP handler
*
* The instructions SGDT, SIDT, STR, SMSW and SLDT cause a general protection
* fault if executed with CPL > 0 (i.e., from user space). This function fixes
* the exception up and provides dummy results for SGDT, SIDT and SMSW; STR
* and SLDT are not fixed up.
*
* If operands are memory addresses, results are copied to user-space memory as
* indicated by the instruction pointed by eIP using the registers indicated in
* the instruction operands. If operands are registers, results are copied into
* the context that was saved when entering kernel mode.
*
* Returns:
*
* True if emulation was successful; false if not.
*/
bool fixup_umip_exception(struct pt_regs *regs)
{
int not_copied, nr_copied, reg_offset, dummy_data_size, umip_inst;
unsigned long seg_base = 0, *reg_addr;
/* 10 bytes is the maximum size of the result of UMIP instructions */
unsigned char dummy_data[10] = { 0 };
unsigned char buf[MAX_INSN_SIZE];
void __user *uaddr;
struct insn insn;
int seg_defs;
if (!regs)
return false;
/*
* If not in user-space long mode, a custom code segment could be in
* use. This is true in protected mode (if the process defined a local
* descriptor table), or virtual-8086 mode. In most of the cases
* seg_base will be zero as in USER_CS.
*/
if (!user_64bit_mode(regs))
seg_base = insn_get_seg_base(regs, INAT_SEG_REG_CS);
if (seg_base == -1L)
return false;
not_copied = copy_from_user(buf, (void __user *)(seg_base + regs->ip),
sizeof(buf));
nr_copied = sizeof(buf) - not_copied;
/*
* The copy_from_user above could have failed if user code is protected
* by a memory protection key. Give up on emulation in such a case.
* Should we issue a page fault?
*/
if (!nr_copied)
return false;
insn_init(&insn, buf, nr_copied, user_64bit_mode(regs));
/*
* Override the default operand and address sizes with what is specified
* in the code segment descriptor. The instruction decoder only sets
* the address size it to either 4 or 8 address bytes and does nothing
* for the operand bytes. This OK for most of the cases, but we could
* have special cases where, for instance, a 16-bit code segment
* descriptor is used.
* If there is an address override prefix, the instruction decoder
* correctly updates these values, even for 16-bit defaults.
*/
seg_defs = insn_get_code_seg_params(regs);
if (seg_defs == -EINVAL)
return false;
insn.addr_bytes = INSN_CODE_SEG_ADDR_SZ(seg_defs);
insn.opnd_bytes = INSN_CODE_SEG_OPND_SZ(seg_defs);
insn_get_length(&insn);
if (nr_copied < insn.length)
return false;
umip_inst = identify_insn(&insn);
if (umip_inst < 0)
return false;
umip_pr_warning(regs, "%s instruction cannot be used by applications.\n",
umip_insns[umip_inst]);
/* Do not emulate (spoof) SLDT or STR. */
if (umip_inst == UMIP_INST_STR || umip_inst == UMIP_INST_SLDT)
return false;
umip_pr_warning(regs, "For now, expensive software emulation returns the result.\n");
if (emulate_umip_insn(&insn, umip_inst, dummy_data, &dummy_data_size,
user_64bit_mode(regs)))
return false;
/*
* If operand is a register, write result to the copy of the register
* value that was pushed to the stack when entering into kernel mode.
* Upon exit, the value we write will be restored to the actual hardware
* register.
*/
if (X86_MODRM_MOD(insn.modrm.value) == 3) {
reg_offset = insn_get_modrm_rm_off(&insn, regs);
/*
* Negative values are usually errors. In memory addressing,
* the exception is -EDOM. Since we expect a register operand,
* all negative values are errors.
*/
if (reg_offset < 0)
return false;
reg_addr = (unsigned long *)((unsigned long)regs + reg_offset);
memcpy(reg_addr, dummy_data, dummy_data_size);
} else {
uaddr = insn_get_addr_ref(&insn, regs);
if ((unsigned long)uaddr == -1L)
return false;
nr_copied = copy_to_user(uaddr, dummy_data, dummy_data_size);
if (nr_copied > 0) {
/*
* If copy fails, send a signal and tell caller that
* fault was fixed up.
*/
force_sig_info_umip_fault(uaddr, regs);
return true;
}
}
/* increase IP to let the program keep going */
regs->ip += insn.length;
return true;
}