linux/drivers/misc/ics932s401.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

507 lines
13 KiB
C

/*
* A driver for the Integrated Circuits ICS932S401
* Copyright (C) 2008 IBM
*
* Author: Darrick J. Wong <djwong@us.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/log2.h>
#include <linux/slab.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END };
/* ICS932S401 registers */
#define ICS932S401_REG_CFG2 0x01
#define ICS932S401_CFG1_SPREAD 0x01
#define ICS932S401_REG_CFG7 0x06
#define ICS932S401_FS_MASK 0x07
#define ICS932S401_REG_VENDOR_REV 0x07
#define ICS932S401_VENDOR 1
#define ICS932S401_VENDOR_MASK 0x0F
#define ICS932S401_REV 4
#define ICS932S401_REV_SHIFT 4
#define ICS932S401_REG_DEVICE 0x09
#define ICS932S401_DEVICE 11
#define ICS932S401_REG_CTRL 0x0A
#define ICS932S401_MN_ENABLED 0x80
#define ICS932S401_CPU_ALT 0x04
#define ICS932S401_SRC_ALT 0x08
#define ICS932S401_REG_CPU_M_CTRL 0x0B
#define ICS932S401_M_MASK 0x3F
#define ICS932S401_REG_CPU_N_CTRL 0x0C
#define ICS932S401_REG_CPU_SPREAD1 0x0D
#define ICS932S401_REG_CPU_SPREAD2 0x0E
#define ICS932S401_SPREAD_MASK 0x7FFF
#define ICS932S401_REG_SRC_M_CTRL 0x0F
#define ICS932S401_REG_SRC_N_CTRL 0x10
#define ICS932S401_REG_SRC_SPREAD1 0x11
#define ICS932S401_REG_SRC_SPREAD2 0x12
#define ICS932S401_REG_CPU_DIVISOR 0x13
#define ICS932S401_CPU_DIVISOR_SHIFT 4
#define ICS932S401_REG_PCISRC_DIVISOR 0x14
#define ICS932S401_SRC_DIVISOR_MASK 0x0F
#define ICS932S401_PCI_DIVISOR_SHIFT 4
/* Base clock is 14.318MHz */
#define BASE_CLOCK 14318
#define NUM_REGS 21
#define NUM_MIRRORED_REGS 15
static int regs_to_copy[NUM_MIRRORED_REGS] = {
ICS932S401_REG_CFG2,
ICS932S401_REG_CFG7,
ICS932S401_REG_VENDOR_REV,
ICS932S401_REG_DEVICE,
ICS932S401_REG_CTRL,
ICS932S401_REG_CPU_M_CTRL,
ICS932S401_REG_CPU_N_CTRL,
ICS932S401_REG_CPU_SPREAD1,
ICS932S401_REG_CPU_SPREAD2,
ICS932S401_REG_SRC_M_CTRL,
ICS932S401_REG_SRC_N_CTRL,
ICS932S401_REG_SRC_SPREAD1,
ICS932S401_REG_SRC_SPREAD2,
ICS932S401_REG_CPU_DIVISOR,
ICS932S401_REG_PCISRC_DIVISOR,
};
/* How often do we reread sensors values? (In jiffies) */
#define SENSOR_REFRESH_INTERVAL (2 * HZ)
/* How often do we reread sensor limit values? (In jiffies) */
#define LIMIT_REFRESH_INTERVAL (60 * HZ)
struct ics932s401_data {
struct attribute_group attrs;
struct mutex lock;
char sensors_valid;
unsigned long sensors_last_updated; /* In jiffies */
u8 regs[NUM_REGS];
};
static int ics932s401_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int ics932s401_detect(struct i2c_client *client,
struct i2c_board_info *info);
static int ics932s401_remove(struct i2c_client *client);
static const struct i2c_device_id ics932s401_id[] = {
{ "ics932s401", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ics932s401_id);
static struct i2c_driver ics932s401_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "ics932s401",
},
.probe = ics932s401_probe,
.remove = ics932s401_remove,
.id_table = ics932s401_id,
.detect = ics932s401_detect,
.address_list = normal_i2c,
};
static struct ics932s401_data *ics932s401_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct ics932s401_data *data = i2c_get_clientdata(client);
unsigned long local_jiffies = jiffies;
int i, temp;
mutex_lock(&data->lock);
if (time_before(local_jiffies, data->sensors_last_updated +
SENSOR_REFRESH_INTERVAL)
&& data->sensors_valid)
goto out;
/*
* Each register must be read as a word and then right shifted 8 bits.
* Not really sure why this is; setting the "byte count programming"
* register to 1 does not fix this problem.
*/
for (i = 0; i < NUM_MIRRORED_REGS; i++) {
temp = i2c_smbus_read_word_data(client, regs_to_copy[i]);
data->regs[regs_to_copy[i]] = temp >> 8;
}
data->sensors_last_updated = local_jiffies;
data->sensors_valid = 1;
out:
mutex_unlock(&data->lock);
return data;
}
static ssize_t show_spread_enabled(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)
return sprintf(buf, "1\n");
return sprintf(buf, "0\n");
}
/* bit to cpu khz map */
static const int fs_speeds[] = {
266666,
133333,
200000,
166666,
333333,
100000,
400000,
0,
};
/* clock divisor map */
static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16,
24, 40, 120};
/* Calculate CPU frequency from the M/N registers. */
static int calculate_cpu_freq(struct ics932s401_data *data)
{
int m, n, freq;
m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK;
n = data->regs[ICS932S401_REG_CPU_N_CTRL];
/* Pull in bits 8 & 9 from the M register */
n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1;
n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3;
freq = BASE_CLOCK * (n + 8) / (m + 2);
freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >>
ICS932S401_CPU_DIVISOR_SHIFT];
return freq;
}
static ssize_t show_cpu_clock(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
return sprintf(buf, "%d\n", calculate_cpu_freq(data));
}
static ssize_t show_cpu_clock_sel(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
int freq;
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
freq = calculate_cpu_freq(data);
else {
/* Freq is neatly wrapped up for us */
int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK;
freq = fs_speeds[fid];
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) {
switch (freq) {
case 166666:
freq = 160000;
break;
case 333333:
freq = 320000;
break;
}
}
}
return sprintf(buf, "%d\n", freq);
}
/* Calculate SRC frequency from the M/N registers. */
static int calculate_src_freq(struct ics932s401_data *data)
{
int m, n, freq;
m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
n = data->regs[ICS932S401_REG_SRC_N_CTRL];
/* Pull in bits 8 & 9 from the M register */
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
freq = BASE_CLOCK * (n + 8) / (m + 2);
freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] &
ICS932S401_SRC_DIVISOR_MASK];
return freq;
}
static ssize_t show_src_clock(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
return sprintf(buf, "%d\n", calculate_src_freq(data));
}
static ssize_t show_src_clock_sel(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
int freq;
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
freq = calculate_src_freq(data);
else
/* Freq is neatly wrapped up for us */
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT &&
data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT)
freq = 96000;
else
freq = 100000;
return sprintf(buf, "%d\n", freq);
}
/* Calculate PCI frequency from the SRC M/N registers. */
static int calculate_pci_freq(struct ics932s401_data *data)
{
int m, n, freq;
m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
n = data->regs[ICS932S401_REG_SRC_N_CTRL];
/* Pull in bits 8 & 9 from the M register */
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
freq = BASE_CLOCK * (n + 8) / (m + 2);
freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >>
ICS932S401_PCI_DIVISOR_SHIFT];
return freq;
}
static ssize_t show_pci_clock(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
return sprintf(buf, "%d\n", calculate_pci_freq(data));
}
static ssize_t show_pci_clock_sel(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
int freq;
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
freq = calculate_pci_freq(data);
else
freq = 33333;
return sprintf(buf, "%d\n", freq);
}
static ssize_t show_value(struct device *dev,
struct device_attribute *devattr,
char *buf);
static ssize_t show_spread(struct device *dev,
struct device_attribute *devattr,
char *buf);
static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL);
static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL);
static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL);
static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL);
static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL);
static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL);
static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL);
static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL);
static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL);
static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL);
static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL);
static struct attribute *ics932s401_attr[] =
{
&dev_attr_spread_enabled.attr,
&dev_attr_cpu_clock_selection.attr,
&dev_attr_cpu_clock.attr,
&dev_attr_src_clock_selection.attr,
&dev_attr_src_clock.attr,
&dev_attr_pci_clock_selection.attr,
&dev_attr_pci_clock.attr,
&dev_attr_usb_clock.attr,
&dev_attr_ref_clock.attr,
&dev_attr_cpu_spread.attr,
&dev_attr_src_spread.attr,
NULL
};
static ssize_t show_value(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
int x;
if (devattr == &dev_attr_usb_clock)
x = 48000;
else if (devattr == &dev_attr_ref_clock)
x = BASE_CLOCK;
else
BUG();
return sprintf(buf, "%d\n", x);
}
static ssize_t show_spread(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
struct ics932s401_data *data = ics932s401_update_device(dev);
int reg;
unsigned long val;
if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD))
return sprintf(buf, "0%%\n");
if (devattr == &dev_attr_src_spread)
reg = ICS932S401_REG_SRC_SPREAD1;
else if (devattr == &dev_attr_cpu_spread)
reg = ICS932S401_REG_CPU_SPREAD1;
else
BUG();
val = data->regs[reg] | (data->regs[reg + 1] << 8);
val &= ICS932S401_SPREAD_MASK;
/* Scale 0..2^14 to -0.5. */
val = 500000 * val / 16384;
return sprintf(buf, "-0.%lu%%\n", val);
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int ics932s401_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
vendor = i2c_smbus_read_word_data(client, ICS932S401_REG_VENDOR_REV);
vendor >>= 8;
revision = vendor >> ICS932S401_REV_SHIFT;
vendor &= ICS932S401_VENDOR_MASK;
if (vendor != ICS932S401_VENDOR)
return -ENODEV;
device = i2c_smbus_read_word_data(client, ICS932S401_REG_DEVICE);
device >>= 8;
if (device != ICS932S401_DEVICE)
return -ENODEV;
if (revision != ICS932S401_REV)
dev_info(&adapter->dev, "Unknown revision %d\n", revision);
strlcpy(info->type, "ics932s401", I2C_NAME_SIZE);
return 0;
}
static int ics932s401_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct ics932s401_data *data;
int err;
data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
i2c_set_clientdata(client, data);
mutex_init(&data->lock);
dev_info(&client->dev, "%s chip found\n", client->name);
/* Register sysfs hooks */
data->attrs.attrs = ics932s401_attr;
err = sysfs_create_group(&client->dev.kobj, &data->attrs);
if (err)
goto exit_free;
return 0;
exit_free:
kfree(data);
exit:
return err;
}
static int ics932s401_remove(struct i2c_client *client)
{
struct ics932s401_data *data = i2c_get_clientdata(client);
sysfs_remove_group(&client->dev.kobj, &data->attrs);
kfree(data);
return 0;
}
static int __init ics932s401_init(void)
{
return i2c_add_driver(&ics932s401_driver);
}
static void __exit ics932s401_exit(void)
{
i2c_del_driver(&ics932s401_driver);
}
MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
MODULE_DESCRIPTION("ICS932S401 driver");
MODULE_LICENSE("GPL");
module_init(ics932s401_init);
module_exit(ics932s401_exit);
/* IBM IntelliStation Z30 */
MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*");
MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*");
/* IBM x3650/x3550 */
MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*");
MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*");