linux/drivers/mtd/maps/uclinux.c
Greg Ungerer 08a3c4bc23 mtd: fix wrong usage of ioremap_nocache() in uclinux.c map driver
The uclinux.c mapping driver uses ioremap_nocache() to map its physical
mapping address to a system virtual address. Problem is that the region
it is mapping is not device memory. It is ordinary system RAM. On most
non-MMU systems this doesn't matter, and the mapping is always a 1:1
translation of the address. On paged memory systems on some architectures
the page table mappings are not compatible between normal RAM and device
memory.

If we want to use the uclinux.c mapping driver on real MMU enabled systems
we should be using the kernel virtual address that the mapping is at. For
architectures that support the traditional initrd they use phys_to_virt or
__va to convert the physical start initrd address to a kernel usable virtual
address. The uclinux filesystem mapping is even more restrictive than the
typical initrd, it always follows the kernels own bss section (so always in
directly mapped memory). Therefore we can use the usual phys_to_virt to
translate the physical start address to a virtual address.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29 14:58:05 +01:00

124 lines
3.1 KiB
C

/****************************************************************************/
/*
* uclinux.c -- generic memory mapped MTD driver for uclinux
*
* (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
*/
/****************************************************************************/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/major.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/sections.h>
/****************************************************************************/
struct map_info uclinux_ram_map = {
.name = "RAM",
.phys = (unsigned long)__bss_stop,
.size = 0,
};
static struct mtd_info *uclinux_ram_mtdinfo;
/****************************************************************************/
static struct mtd_partition uclinux_romfs[] = {
{ .name = "ROMfs" }
};
#define NUM_PARTITIONS ARRAY_SIZE(uclinux_romfs)
/****************************************************************************/
static int uclinux_point(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, void **virt, resource_size_t *phys)
{
struct map_info *map = mtd->priv;
*virt = map->virt + from;
if (phys)
*phys = map->phys + from;
*retlen = len;
return(0);
}
/****************************************************************************/
static int __init uclinux_mtd_init(void)
{
struct mtd_info *mtd;
struct map_info *mapp;
mapp = &uclinux_ram_map;
if (!mapp->size)
mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8))));
mapp->bankwidth = 4;
printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n",
(int) mapp->phys, (int) mapp->size);
/*
* The filesystem is guaranteed to be in direct mapped memory. It is
* directly following the kernels own bss region. Following the same
* mechanism used by architectures setting up traditional initrds we
* use phys_to_virt to get the virtual address of its start.
*/
mapp->virt = phys_to_virt(mapp->phys);
if (mapp->virt == 0) {
printk("uclinux[mtd]: no virtual mapping?\n");
return(-EIO);
}
simple_map_init(mapp);
mtd = do_map_probe("map_ram", mapp);
if (!mtd) {
printk("uclinux[mtd]: failed to find a mapping?\n");
return(-ENXIO);
}
mtd->owner = THIS_MODULE;
mtd->_point = uclinux_point;
mtd->priv = mapp;
uclinux_ram_mtdinfo = mtd;
mtd_device_register(mtd, uclinux_romfs, NUM_PARTITIONS);
return(0);
}
/****************************************************************************/
static void __exit uclinux_mtd_cleanup(void)
{
if (uclinux_ram_mtdinfo) {
mtd_device_unregister(uclinux_ram_mtdinfo);
map_destroy(uclinux_ram_mtdinfo);
uclinux_ram_mtdinfo = NULL;
}
if (uclinux_ram_map.virt)
uclinux_ram_map.virt = 0;
}
/****************************************************************************/
module_init(uclinux_mtd_init);
module_exit(uclinux_mtd_cleanup);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
MODULE_DESCRIPTION("Generic RAM based MTD for uClinux");
/****************************************************************************/