Shawn Guo 2c7c2c1d01 ARM: mxs: tx28: reset fec phy for device tree boot ... For non-DT boot, function tx28_add_fec0 configures all ENET0 pins into gpio mode for resetting fec phy, and then reconfigures those pins into ENET function after that. For DT boot, all the pin configuration is done by pinctrl subsystem. Ideally, when gpio_request gets called, GPIO subsystem should call pinctrl to configure pins into gpio mode automatically, and have pins freed up from pinctrl subsystem when gpio_free is called. But right now, this cooperation between gpio and pinctrl hasn't been available. As the result, we have to explicitly call pinctrl_get_select and pinctrl_put for device tree boot. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Lothar Waßmann <LW@KARO-electronics.de>		2012-08-17 12:35:09 +08:00
..
bootp	ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S	2010-11-30 13:44:24 +00:00
compressed	ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE	2012-07-09 17:39:39 +01:00
dts	ARM: mxs: tx28: reset fec phy for device tree boot	2012-08-17 12:35:09 +08:00
.gitignore	ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore	2012-01-30 11:47:37 -07:00
install.sh	kbuild: use INSTALLKERNEL to select customized installkernel script	2009-09-20 12:18:14 +02:00
Makefile	Kbuild: centralize MKIMAGE and cmd_uimage definitions	2012-03-26 15:49:20 +02:00