linux/drivers/phy/phy-exynos5-usbdrd.c
Peter Griffin 4f0eb5d7ef phy: remove .owner field for drivers using module_platform_driver
This patch removes the superflous .owner field for drivers which
use the module_platform_driver or platform_driver_register api,
as this is overriden in __platform_driver_register.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-09-24 15:18:34 +05:30

678 lines
18 KiB
C

/*
* Samsung EXYNOS5 SoC series USB DRD PHY driver
*
* Phy provider for USB 3.0 DRD controller on Exynos5 SoC series
*
* Copyright (C) 2014 Samsung Electronics Co., Ltd.
* Author: Vivek Gautam <gautam.vivek@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
/* Exynos USB PHY registers */
#define EXYNOS5_FSEL_9MHZ6 0x0
#define EXYNOS5_FSEL_10MHZ 0x1
#define EXYNOS5_FSEL_12MHZ 0x2
#define EXYNOS5_FSEL_19MHZ2 0x3
#define EXYNOS5_FSEL_20MHZ 0x4
#define EXYNOS5_FSEL_24MHZ 0x5
#define EXYNOS5_FSEL_50MHZ 0x7
/* EXYNOS5: USB 3.0 DRD PHY registers */
#define EXYNOS5_DRD_LINKSYSTEM 0x04
#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27)
#define EXYNOS5_DRD_PHYUTMI 0x08
#define PHYUTMI_OTGDISABLE BIT(6)
#define PHYUTMI_FORCESUSPEND BIT(1)
#define PHYUTMI_FORCESLEEP BIT(0)
#define EXYNOS5_DRD_PHYPIPE 0x0c
#define EXYNOS5_DRD_PHYCLKRST 0x10
#define PHYCLKRST_EN_UTMISUSPEND BIT(31)
#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
#define PHYCLKRST_SSC_EN BIT(20)
#define PHYCLKRST_REF_SSP_EN BIT(19)
#define PHYCLKRST_REF_CLKDIV2 BIT(18)
#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5)
#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8)
#define PHYCLKRST_FSEL(_x) ((_x) << 5)
#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
#define PHYCLKRST_RETENABLEN BIT(4)
#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
#define PHYCLKRST_PORTRESET BIT(1)
#define PHYCLKRST_COMMONONN BIT(0)
#define EXYNOS5_DRD_PHYREG0 0x14
#define EXYNOS5_DRD_PHYREG1 0x18
#define EXYNOS5_DRD_PHYPARAM0 0x1c
#define PHYPARAM0_REF_USE_PAD BIT(31)
#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
#define EXYNOS5_DRD_PHYPARAM1 0x20
#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
#define EXYNOS5_DRD_PHYTERM 0x24
#define EXYNOS5_DRD_PHYTEST 0x28
#define PHYTEST_POWERDOWN_SSP BIT(3)
#define PHYTEST_POWERDOWN_HSP BIT(2)
#define EXYNOS5_DRD_PHYADP 0x2c
#define EXYNOS5_DRD_PHYUTMICLKSEL 0x30
#define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2)
#define EXYNOS5_DRD_PHYRESUME 0x34
#define EXYNOS5_DRD_LINKPORT 0x44
#define KHZ 1000
#define MHZ (KHZ * KHZ)
enum exynos5_usbdrd_phy_id {
EXYNOS5_DRDPHY_UTMI,
EXYNOS5_DRDPHY_PIPE3,
EXYNOS5_DRDPHYS_NUM,
};
struct phy_usb_instance;
struct exynos5_usbdrd_phy;
struct exynos5_usbdrd_phy_config {
u32 id;
void (*phy_isol)(struct phy_usb_instance *inst, u32 on);
void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd);
unsigned int (*set_refclk)(struct phy_usb_instance *inst);
};
struct exynos5_usbdrd_phy_drvdata {
const struct exynos5_usbdrd_phy_config *phy_cfg;
u32 pmu_offset_usbdrd0_phy;
u32 pmu_offset_usbdrd1_phy;
};
/**
* struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY
* @dev: pointer to device instance of this platform device
* @reg_phy: usb phy controller register memory base
* @clk: phy clock for register access
* @drv_data: pointer to SoC level driver data structure
* @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
* instances each with its 'phy' and 'phy_cfg'.
* @extrefclk: frequency select settings when using 'separate
* reference clocks' for SS and HS operations
* @ref_clk: reference clock to PHY block from which PHY's
* operational clocks are derived
* @ref_rate: rate of above reference clock
*/
struct exynos5_usbdrd_phy {
struct device *dev;
void __iomem *reg_phy;
struct clk *clk;
const struct exynos5_usbdrd_phy_drvdata *drv_data;
struct phy_usb_instance {
struct phy *phy;
u32 index;
struct regmap *reg_pmu;
u32 pmu_offset;
const struct exynos5_usbdrd_phy_config *phy_cfg;
} phys[EXYNOS5_DRDPHYS_NUM];
u32 extrefclk;
struct clk *ref_clk;
struct regulator *vbus;
};
static inline
struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst)
{
return container_of((inst), struct exynos5_usbdrd_phy,
phys[(inst)->index]);
}
/*
* exynos5_rate_to_clk() converts the supplied clock rate to the value that
* can be written to the phy register.
*/
static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg)
{
/* EXYNOS5_FSEL_MASK */
switch (rate) {
case 9600 * KHZ:
*reg = EXYNOS5_FSEL_9MHZ6;
break;
case 10 * MHZ:
*reg = EXYNOS5_FSEL_10MHZ;
break;
case 12 * MHZ:
*reg = EXYNOS5_FSEL_12MHZ;
break;
case 19200 * KHZ:
*reg = EXYNOS5_FSEL_19MHZ2;
break;
case 20 * MHZ:
*reg = EXYNOS5_FSEL_20MHZ;
break;
case 24 * MHZ:
*reg = EXYNOS5_FSEL_24MHZ;
break;
case 50 * MHZ:
*reg = EXYNOS5_FSEL_50MHZ;
break;
default:
return -EINVAL;
}
return 0;
}
static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
unsigned int on)
{
unsigned int val;
if (!inst->reg_pmu)
return;
val = on ? 0 : EXYNOS5_PHY_ENABLE;
regmap_update_bits(inst->reg_pmu, inst->pmu_offset,
EXYNOS5_PHY_ENABLE, val);
}
/*
* Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock
* from clock core. Further sets multiplier values and spread spectrum
* clock settings for SuperSpeed operations.
*/
static unsigned int
exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
{
static u32 reg;
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
/* restore any previous reference clock settings */
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
/* Use EXTREFCLK as ref clock */
reg &= ~PHYCLKRST_REFCLKSEL_MASK;
reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK;
/* FSEL settings corresponding to reference clock */
reg &= ~PHYCLKRST_FSEL_PIPE_MASK |
PHYCLKRST_MPLL_MULTIPLIER_MASK |
PHYCLKRST_SSC_REFCLKSEL_MASK;
switch (phy_drd->extrefclk) {
case EXYNOS5_FSEL_50MHZ:
reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
PHYCLKRST_SSC_REFCLKSEL(0x00));
break;
case EXYNOS5_FSEL_24MHZ:
reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
PHYCLKRST_SSC_REFCLKSEL(0x88));
break;
case EXYNOS5_FSEL_20MHZ:
reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
PHYCLKRST_SSC_REFCLKSEL(0x00));
break;
case EXYNOS5_FSEL_19MHZ2:
reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
PHYCLKRST_SSC_REFCLKSEL(0x88));
break;
default:
dev_dbg(phy_drd->dev, "unsupported ref clk\n");
break;
}
return reg;
}
/*
* Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock
* from clock core. Further sets the FSEL values for HighSpeed operations.
*/
static unsigned int
exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
{
static u32 reg;
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
/* restore any previous reference clock settings */
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
reg &= ~PHYCLKRST_REFCLKSEL_MASK;
reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK;
reg &= ~PHYCLKRST_FSEL_UTMI_MASK |
PHYCLKRST_MPLL_MULTIPLIER_MASK |
PHYCLKRST_SSC_REFCLKSEL_MASK;
reg |= PHYCLKRST_FSEL(phy_drd->extrefclk);
return reg;
}
static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
{
u32 reg;
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
/* Set Tx De-Emphasis level */
reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
reg |= PHYPARAM1_PCS_TXDEEMPH;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
reg &= ~PHYTEST_POWERDOWN_SSP;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
}
static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
{
u32 reg;
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
/* Set Loss-of-Signal Detector sensitivity */
reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
reg |= PHYPARAM0_REF_LOSLEVEL;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
/* Set Tx De-Emphasis level */
reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
reg |= PHYPARAM1_PCS_TXDEEMPH;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
/* UTMI Power Control */
writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
reg &= ~PHYTEST_POWERDOWN_HSP;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
}
static int exynos5_usbdrd_phy_init(struct phy *phy)
{
int ret;
u32 reg;
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
ret = clk_prepare_enable(phy_drd->clk);
if (ret)
return ret;
/* Reset USB 3.0 PHY */
writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME);
/*
* Setting the Frame length Adj value[6:1] to default 0x20
* See xHCI 1.0 spec, 5.2.4
*/
reg = LINKSYSTEM_XHCI_VERSION_CONTROL |
LINKSYSTEM_FLADJ(0x20);
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM);
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
/* Select PHY CLK source */
reg &= ~PHYPARAM0_REF_USE_PAD;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
/* This bit must be set for both HS and SS operations */
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);
reg |= PHYUTMICLKSEL_UTMI_CLKSEL;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);
/* UTMI or PIPE3 specific init */
inst->phy_cfg->phy_init(phy_drd);
/* reference clock settings */
reg = inst->phy_cfg->set_refclk(inst);
/* Digital power supply in normal operating mode */
reg |= PHYCLKRST_RETENABLEN |
/* Enable ref clock for SS function */
PHYCLKRST_REF_SSP_EN |
/* Enable spread spectrum */
PHYCLKRST_SSC_EN |
/* Power down HS Bias and PLL blocks in suspend mode */
PHYCLKRST_COMMONONN |
/* Reset the port */
PHYCLKRST_PORTRESET;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
udelay(10);
reg &= ~PHYCLKRST_PORTRESET;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
clk_disable_unprepare(phy_drd->clk);
return 0;
}
static int exynos5_usbdrd_phy_exit(struct phy *phy)
{
int ret;
u32 reg;
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
ret = clk_prepare_enable(phy_drd->clk);
if (ret)
return ret;
reg = PHYUTMI_OTGDISABLE |
PHYUTMI_FORCESUSPEND |
PHYUTMI_FORCESLEEP;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);
/* Resetting the PHYCLKRST enable bits to reduce leakage current */
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
reg &= ~(PHYCLKRST_REF_SSP_EN |
PHYCLKRST_SSC_EN |
PHYCLKRST_COMMONONN);
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
/* Control PHYTEST to remove leakage current */
reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
reg |= PHYTEST_POWERDOWN_SSP |
PHYTEST_POWERDOWN_HSP;
writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
clk_disable_unprepare(phy_drd->clk);
return 0;
}
static int exynos5_usbdrd_phy_power_on(struct phy *phy)
{
int ret;
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n");
clk_prepare_enable(phy_drd->ref_clk);
/* Enable VBUS supply */
if (phy_drd->vbus) {
ret = regulator_enable(phy_drd->vbus);
if (ret) {
dev_err(phy_drd->dev, "Failed to enable VBUS supply\n");
goto fail_vbus;
}
}
/* Power-on PHY*/
inst->phy_cfg->phy_isol(inst, 0);
return 0;
fail_vbus:
clk_disable_unprepare(phy_drd->ref_clk);
return ret;
}
static int exynos5_usbdrd_phy_power_off(struct phy *phy)
{
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n");
/* Power-off the PHY */
inst->phy_cfg->phy_isol(inst, 1);
/* Disable VBUS supply */
if (phy_drd->vbus)
regulator_disable(phy_drd->vbus);
clk_disable_unprepare(phy_drd->ref_clk);
return 0;
}
static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev);
if (WARN_ON(args->args[0] > EXYNOS5_DRDPHYS_NUM))
return ERR_PTR(-ENODEV);
return phy_drd->phys[args->args[0]].phy;
}
static struct phy_ops exynos5_usbdrd_phy_ops = {
.init = exynos5_usbdrd_phy_init,
.exit = exynos5_usbdrd_phy_exit,
.power_on = exynos5_usbdrd_phy_power_on,
.power_off = exynos5_usbdrd_phy_power_off,
.owner = THIS_MODULE,
};
static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = {
{
.id = EXYNOS5_DRDPHY_UTMI,
.phy_isol = exynos5_usbdrd_phy_isol,
.phy_init = exynos5_usbdrd_utmi_init,
.set_refclk = exynos5_usbdrd_utmi_set_refclk,
},
{
.id = EXYNOS5_DRDPHY_PIPE3,
.phy_isol = exynos5_usbdrd_phy_isol,
.phy_init = exynos5_usbdrd_pipe3_init,
.set_refclk = exynos5_usbdrd_pipe3_set_refclk,
},
};
static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = {
.phy_cfg = phy_cfg_exynos5,
.pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
.pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL,
};
static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = {
.phy_cfg = phy_cfg_exynos5,
.pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
};
static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
{
.compatible = "samsung,exynos5250-usbdrd-phy",
.data = &exynos5250_usbdrd_phy
}, {
.compatible = "samsung,exynos5420-usbdrd-phy",
.data = &exynos5420_usbdrd_phy
},
{ },
};
MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match);
static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct exynos5_usbdrd_phy *phy_drd;
struct phy_provider *phy_provider;
struct resource *res;
const struct of_device_id *match;
const struct exynos5_usbdrd_phy_drvdata *drv_data;
struct regmap *reg_pmu;
u32 pmu_offset;
unsigned long ref_rate;
int i, ret;
int channel;
phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL);
if (!phy_drd)
return -ENOMEM;
dev_set_drvdata(dev, phy_drd);
phy_drd->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
phy_drd->reg_phy = devm_ioremap_resource(dev, res);
if (IS_ERR(phy_drd->reg_phy))
return PTR_ERR(phy_drd->reg_phy);
match = of_match_node(exynos5_usbdrd_phy_of_match, pdev->dev.of_node);
drv_data = match->data;
phy_drd->drv_data = drv_data;
phy_drd->clk = devm_clk_get(dev, "phy");
if (IS_ERR(phy_drd->clk)) {
dev_err(dev, "Failed to get clock of phy controller\n");
return PTR_ERR(phy_drd->clk);
}
phy_drd->ref_clk = devm_clk_get(dev, "ref");
if (IS_ERR(phy_drd->ref_clk)) {
dev_err(dev, "Failed to get reference clock of usbdrd phy\n");
return PTR_ERR(phy_drd->ref_clk);
}
ref_rate = clk_get_rate(phy_drd->ref_clk);
ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk);
if (ret) {
dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n",
ref_rate);
return ret;
}
reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
"samsung,pmu-syscon");
if (IS_ERR(reg_pmu)) {
dev_err(dev, "Failed to lookup PMU regmap\n");
return PTR_ERR(reg_pmu);
}
/*
* Exynos5420 SoC has multiple channels for USB 3.0 PHY, with
* each having separate power control registers.
* 'channel' facilitates to set such registers.
*/
channel = of_alias_get_id(node, "usbdrdphy");
if (channel < 0)
dev_dbg(dev, "Not a multi-controller usbdrd phy\n");
switch (channel) {
case 1:
pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy;
break;
case 0:
default:
pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy;
break;
}
/* Get Vbus regulator */
phy_drd->vbus = devm_regulator_get(dev, "vbus");
if (IS_ERR(phy_drd->vbus)) {
ret = PTR_ERR(phy_drd->vbus);
if (ret == -EPROBE_DEFER)
return ret;
dev_warn(dev, "Failed to get VBUS supply regulator\n");
phy_drd->vbus = NULL;
}
dev_vdbg(dev, "Creating usbdrd_phy phy\n");
for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) {
struct phy *phy = devm_phy_create(dev, NULL,
&exynos5_usbdrd_phy_ops,
NULL);
if (IS_ERR(phy)) {
dev_err(dev, "Failed to create usbdrd_phy phy\n");
return PTR_ERR(phy);
}
phy_drd->phys[i].phy = phy;
phy_drd->phys[i].index = i;
phy_drd->phys[i].reg_pmu = reg_pmu;
phy_drd->phys[i].pmu_offset = pmu_offset;
phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i];
phy_set_drvdata(phy, &phy_drd->phys[i]);
}
phy_provider = devm_of_phy_provider_register(dev,
exynos5_usbdrd_phy_xlate);
if (IS_ERR(phy_provider)) {
dev_err(phy_drd->dev, "Failed to register phy provider\n");
return PTR_ERR(phy_provider);
}
return 0;
}
static struct platform_driver exynos5_usb3drd_phy = {
.probe = exynos5_usbdrd_phy_probe,
.driver = {
.of_match_table = exynos5_usbdrd_phy_of_match,
.name = "exynos5_usb3drd_phy",
}
};
module_platform_driver(exynos5_usb3drd_phy);
MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver");
MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:exynos5_usb3drd_phy");